Jump to content
SAU Community

*****need Help Finding Someone To Install N1 Turbo's At A Good Price Please Help Me******

_K1NGTR_

By _K1NGTR_,
in Engines & Forced Induction

 Share

Recommended Posts

_K1NGTR_ Proficient

_K1NGTR_

Posted
Posted

Hi all as the topic sais i am getting N1 Turbos for my R32 and got a quote for $800 to Install them and another $250 to tune the car but i did not know that N1's would cost so much to install as they are direct bolt on.

If anyone knows a Good Tuner to go to that installs cheap can you please let me know asap as i need this done soon and i am located in the south eastern suburbs of Melbourne so Dandenong, Morrabin, Cheltenham etc.

I would do this my self but i am in the Process of Spraying the car so i don't have the time and effort to install them i want to spray it and drop it off so any help would be greatly appreciated

thanks.

jantolis Proficient

jantolis

Posted
Posted (edited)

Yeah installing turbos ain't that cheap. Can't remember how much i paid. It was less than $800 i'm sure but not that much cheaper. maybe $600 + gaskets.

Edited by jantolis
R31Nismoid Grand Master

R31Nismoid

Posted
Posted

$800? Your lucky it wasnt $1000 to be honest. $800 is cheap

Just because they are bolt on, does not mean its a 30 second job.

You have to take the intake setup off... front pipes off, then the rear dump, rear turbo, front dump, front turbo

And then reassemble in the order you took it all off and fix up anything that might be a miss in the process (gaskets, damaged vac hoses, poor condition hoses in the area while its apart etc etc)

So simply put, not a simple or fast job by any means.

You should try and do it yourself IMO, and then you'd see that $800 is more than reasonable for such a pr|ck of a job :P

$250 to tune also sounds too cheap IMO.

_K1NGTR_ Proficient

_K1NGTR_

Posted
  • Author
Posted

250 is what i got it dyno'd for the first time from this guy he just started off but he is very good all his equipment is new so its good and he knows what he was talking about.

I need to know other tuners in my area not if im paying to much or if anyone thinks 800 is a good price just need some numbers of shops or advice from people who have actually had N1's installed ?

paulr33 Grand Master

paulr33

Posted
Posted

when he says i think he just means a check to make sure the turbochargers are working and everything is ok

so basicvally just a health check once the turbochargers are fitted

this assumes you have the standard ecu?

or does he mean a touch up of your aftermarket ecu?

_K1NGTR_ Proficient

_K1NGTR_

Posted
  • Author
Posted
when he says i think he just means a check to make sure the turbochargers are working and everything is ok

so basicvally just a health check once the turbochargers are fitted

this assumes you have the standard ecu?

or does he mean a touch up of your aftermarket ecu?

NA i have a power FC he tuned it for me for 250 last time but the turbos im buying are getting built atm i just need to know if anyone has done this upgraded to N1 and how much it cost them and what else they had to do to their car i want to get cam gears all i have is:

Power Fc

Cat Back

And i had a rebuild a while back now im maxing out my turbos and they dont have much life left so i want to upgrade before they blow up and cause more problems later on .

R31Nismoid Grand Master

R31Nismoid

Posted
Posted

Mate have you read half the posts?

$800 - IS CHEAP AND REASONABLE from people who've PAID to have it done or know people/workshop pricing etc.

Why are you still asking about them... i dont get it. $800 is fair, pay the price.

_K1NGTR_ Proficient

_K1NGTR_

Posted
  • Author
Posted

im not happy with 800 i dont care i will pay 800 i wanted to know how much they payed to get an idea of how much it costs i know im getting a good price i just need to know what else i need to do im waiting for people to reply who own GTRs but thanx anyway mate

STATUS Grand Master

STATUS

Posted
Posted (edited)

to be honest even i would not charge less than 800.... even then there is no way im gonna tune it for 250..... id probaly qoute $1200 (with PFC tune) drive in drive out.... my tuning alone is worth $550 and up on a setup like that especially considering i have more work than time.... all work is done on probably the best dyno in Vic.

Edited by URAS
_K1NGTR_ Proficient

_K1NGTR_

Posted
  • Author
Posted
to be honest even i would not charge less than 800.... even then there is no way im gonna tune it for 250..... id probaly qoute $1200 (with PFC tune) drive in drive out.... my tuning alone is worth $550 and up on a setup like that especially considering i have more work than time.... all work is done on probably the best dyno in Vic.

best dyno in vic? thats a pretty big statement well maybe ill give you a try send your details and to me and ill come down?

R31Nismoid Grand Master

R31Nismoid

Posted
Posted

Yeah $250 for a PFC tune is too cheap, they arent doing a full tune.

Your talking $600+ for that

If your not happy with $800 for a full turbo swap out... then you shouldn't own a GTR.

Turbo swaps are the least of your worries :)

femno Grand Master

femno

Posted
Posted

^ No its not. Its time, patience and a 1/4 drive socket set.

Mate Ash has summed it perfectly, so dont just 'thanks mate' and disregard his posts.

He knows plenty more than most on here who actually own GTRs. One of them is you.

800+ is the going rate. Thats it.

Gtrgodzilla67 Community Regular

Gtrgodzilla67

Posted
Posted

Doing the turbos on the car isnt that hard if u have the right tools, i ve done a few of these only take 6-8 hours to complete (with air tools )

800 is to cheap i wouldnt do it at my workshop for that cheap, and yes i own a gtr lol

_K1NGTR_ Proficient

_K1NGTR_

Posted
  • Author
Posted

im not disregarding no ones comments im open to hear suggestions i hate opening a thread on these forums because i ask for one thing or friendly advice and all i get is people coming on who have to add their smart ass comments i didnt ask for peoples opinions i asked for peoples help and thank you for the people who gave me help im happy with 800 i think 800 is cheap and i will pay 800 i just asked what others payed and they told me so thank you for all your help

_K1NGTR_ Proficient

_K1NGTR_

Posted
  • Author
Posted
Bel Garage charged me $500 a couple of months ago for the same job.

oh ok no shit? thanx man where abouts is that is it in Melbourne?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      R32 GTST - 600KW+ RB28/CD009 Build

      By Dose Pipe Sutututu · Posted

      LOL.... a good amount of people (not all) on that continent seem to know everything and like to measure things in bananas, football fields, statue of liberties instead of the metric system lol.
    • dawhitehonky
      M35 Aftermarket Fuel Pump

      By dawhitehonky · Posted

      I assume the modules are similar enough, so if you've had no issues I don't see why I would. I have tried to find a wiring diagram for the FPCM / fuel pump circuit, but I can't find it anywhere. Otherwise, I would just do some wire cutting and joining at the FPCM and give the 12 V supplied to the FPCM directly to the pump instead. If you know anyone that could help with wiring diagrams, I'd be very happy  
    • GTSBoy
      M35 Aftermarket Fuel Pump

      By GTSBoy · Posted

      If it dies, then bypass. The task isn't difficult. I have one running on a standard R32 FPCM. That's after nearly 20 years of it running an 040, which pull substantially more current than the Walbro. They're not the same module, but I'd hope it indicates that the R33 one should be man enough for the job. I think people kill them when putting proper sized pumps on them, not these little toy pumps we're talking about here.
    • GTSBoy
      Rapid-fire squeaking/creaking from rear suspension

      By GTSBoy · Posted

      Silicone spray won't hurt anything. And if it does, that's an opportunity to put some solid steel spherical bushings in, so you can really learn what suspension noise sounds like, If you're going to try it, just spray one bush at a time, so you can work out which one is actually noisy. My best guess is that if the noise started only since putting the coilovers in, then it is just noise being transmitted up through the top mounts of the struts, and not necessarily "new" noise from bushes. But it's almost impossible to know.
    • GTSBoy
      Jacks that fit under GTR lips that can reach the subframe?

      By GTSBoy · Posted

      Are you saying the 34 is SUV height, and not that we're talking about an SUV here? (because if we're talking about an SUV, you don't fix them. You just replace them when something breaks. Not worth establishing sufficient emotional connection with an SUV to warrant doing any work on one). I wouldn't jack my car up on a short little loop of 10mm steel rod poking out through a hole in the bumper bar, front or rear end. I realise that we're probably not talking about that type of loop at the front, being the one under/behind the bar on a Skyline.... but even for that one, trying to jack up on what amounts to a thin piece of steel, designed purely for withstanding a horizontal tension force, not a vertical compressive force (and so would be prone to buckling/crushing) and, my most particular bitch about it - located RIGHT AT THE EXTREME FRONT OF THE CAR, applying a load up through the radiator support panel, etc, with almost the entire mass of the car cantilevered between there and the rear wheels? Nope. Not doing that. Not on the regular. That structure out there in front of the front crossmember is not designed to carry load in the vertical direction. Not really designed to carry any load at all, really. The chassis rail that the tow point is connected to would be fine loaded in tension, as per towing. Not intended to carry the mass of the whole car, especially loaded all on one rail, with twisting and all sorts of shitty load distribution going on. No, I will happily drive up on some pieces of wood, thanks. That can only happen on driven wheels, and they are at the other end of the car, and this problem does not exist at that end of the car. And even then, I have been known to drive up on at least 1x piece of 2x8 each side at the rear, simply to reduce the amount of jack pumping necessary to get the car up high enough for the jack stands. What really really shits me about Skylines is the lack of decent places for chassis stands at either end of the car. You'd think they'd be designed into the crossmembers.
×
×
  • Create New...