Jump to content
SAU Community

Recommended Posts

Having a huge cleanout of 32 GTR parts. All parts are in Melb. Frieght at buyer expense. I will get sizes and weight for you but you have to price the freight up and I will confirm it once you actually want it.

Gauges and Electronics

Apexi Electronic Oil pressure and Exhaust temp gauges and senders with max warning $300 pair

HKS Vane Controller - Very Rare and wanted.

Deletes the need for afm's and can control fuel rates $500

HKS Turbo timer $80 plugs straight into dash loom

Blitz and Mines ECU's $100 each

Engine/Drivetrain

Front drive shafts (need boots) $100 pair

Rear diff and drive shafts $250

Rear drive shafts $150

Blitz external venting BOV's $175 pair or $200 with std gtr pipe to mount on.

Grex Remote Oil Filter re-locator $150

3 GTR radiators $80 each Same as gtst.

Fuel tank with hangers/pump/sender/filler neck $250

RB26dett head with hang-ons, covers, turbos $1250

Complete block, crank, pistons pumps etc $600 Original bore

Sump with diff $250

Might sell some parts of engine for right money.

R34 GTR intercooler in excellent condition $300

Suspension/Brakes

Apexi Shocks height and damper adjustable $350 not to hard-nice

Front GTR calipers and 296mm drilled disks $225

Tein HA height and damper shocks and springs $500

324mm slotted disks-new, spacer kit to run 324mm disks and overhauled calipers and braided lines with heaps of set used performance pads Upgrading to big 355mm brembo's. Best upgrade you can do without spending thousands of dollars. Almost as good as GTR brembos. Same pad width just looses 5mm on height at the bottom. No brake fade running 1.23 at Sandown and 1.52 and PI or 20 min sessions running 1.10's at Wakefield with a few laps to cool engine oil down in the middle.

Will fit R32 gtst, gtr and R33 gtst

$650

Interior

Rear seat $150

Dash board VGC $125

Dash boards. Small boubles in front of passenger $40 each

2 sets nissan floor mats $80 each

Body

RH rear quarter window $60

LH door window w/tint $40

GTR fuel cap door $50

Rear Bumper reo $60

Original Windscreen $100

Door LH complete $75 no trim

RH door $30 bare

Few mirrors $30 each

Also have a shell for sale $2000 rolling with heaps of hang ons. Has import approval under old scheme so can be complied.

Please don't ask for other stuff as this all I have. No swaps either or low ballers. I won't get back to you if you offer stupid prices. Will budge on some stuff but no others. If you know what it looks like please don't ask for pics for silly things.

Some stuff is back up for sale due to time wasters so if I told you it was sold and its relisted I still have it.

  • Replies 52
  • Created
  • Last Reply

Top Posters In This Topic

Cheers Mat. Sorry only selling the whole set. I need the money from the whole set for disks and pads for the upgrade.

Kevind but the shell and you can have the door rubber.

Bris you dirty world traveller. I can hear your car whining and howling in your garages corner like a neglected dog. Holding expecially for you.

I have the hinges for it but no internals. Hense the price. I should have a LH mirror but will need to check.

hey mate

what year is the crank from?

was after a late model for the oil pump drive issue?

cheers

No idea what year the crack is from. Its stilll in the bolck atm. What do I need to look for??? Don't really want to have to remove it as I don't have the space to store it once its apart.

Cheers Badgtr34. I'll get you the pics you requested soon. Had to remove the cover off one of the gauges to replace the globe so I need to get it back together before I take the photos.

I'll see whats involved to get the oil pump off.

hi, could i have pics (both front and rear) of the GTR intercooler? and what size is it also

Cheers

The intercooler is 60x300x600 and is very light weight compared to earlier models. They are a more efficient at cooling than the r32 and r33 gtr intercooolers. I am to believe these can cool/flow well enough to suppport upto 350ish rwkw

It a little dirty in the photo becasue it hasn't been clean since I removed it from the car a few months ago.

post-1670-1221359064_thumb.jpg

post-1670-1221359094_thumb.jpg

The diff came in a shell i bought. I removed the rear cover and the gears are in perfect condition-no spalling. There was also no metal paste sitting in the bottom of the housing. From what I can see it appears to be a very good diff that hasn't copped a hard time. The oil was very clean so I'm guessing the clutchs haven't been wearing. It turns freely with no binding.

hey buddy,

I'll come buy the rear diff and drive shafts now. Im at the shop so you can call me on 9338-5277 and we can talk details.

Regards Dave

Sorry. I cannot edit the first post. The rear diff doesn't come with the drive shafts. They are being sold seperately.

It is meant to read

Rear diff $250

Rear drive shafts $150

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I think the consensus was that's normal. Sloped road surfaces or something? I remember @silviaz went through this before. It might be one of those things you never notice until you pay attention to it.
    • Im not entirely sure exactly what or where its leaking from, he started to pull the boots to swap to my new tie rods + ends and it just vomited fluid, so he closed em up up, swapped the rod ends to the old rods and let me know so I can figure a solution out, im guessing its all origional as as I passed 103k miles earlier this year im sure its just in need of a full overhual/rebuild anyways.    If i could just yank it off and be good it wouldn't be an issue to ship it out and wait for the turnaround but the guy I work with doesnt really have space to keep my car for a week or two at a time, would rather drop it off and have a replacement ready to drop in
    • What do you mean by "seals"? Internal hydraulic seals (ie, is it leaking PS fluid?) or the rack boots that close the rack onto the tie-rods? Because the former is a rebuild, and the latter is trivial that you or any nearby mechanic could do. Dunno about the cowl. Just buy what you think is required and get anything else you find/break afterwards. Wing? Dunno. Don't like R33s enough to pay attention to them. Mirror glass is just glass (on the surface that you want to polish). Go for it.
    • Hello! Long time lurker, been using the forums to address concerns and questions from afar for a while but I've struggled to find some answers so I guess its about time I made an account and formally asked some more knowledgeable people, since finding local skyline owners is hard (and shops that are knowledgeable or trustworthy to work on 'rare' cars are non existent out where im at, as skylines are quite uncommon to find in the wild around here). So the main 3 questions I have, 1: Steering rack has blown seals, well.. they kind of hold but they are not sealed properly anymore and as my R33 is my DD, i cant exactly rip the rack out and send it off or attempt to fix myself. As most refurb ones are around $1,100 or more shipped, and I have other things I need to work on around the car, I was seeking clarification on whether an S15 rack will more or less bolt right in, and whether a common mechanic could do any other required work to get it to fit. I ask, as I've found a supplier than can sell a manufactured as oem one for around 400, if not I'll likely order a used one from Jacks JDM, and take a risk on the seals there. The second question i have is that im replacing the front wiper cowl and have planned to buy 4 new clips and a new center clip but wasnt sure if there were any other clips that would also need to get replaced while I was at it. Given im sure any that are there now will simply break when I remove the old cowl... Last thing would be a fairly straight forward question, i think. If I manage (strong if, finding one has proven to be a pain) to find a R33 GTR spoiler/wing will it require much modification to bolt to a S2 R33 GTST? I've read the bolt patterns dont match but otherwise would bolt in, only options I have found with much luck is China stuff on ebay and carbonetics, which has a nice $650 shipping fee... so if anyone has any pointers where a US chap could locate one that would be great Random side question as well, the mirrors as I understand are mirror glass, and as im planning to polish my windows from water spots and surface scratches, i was hopeful cerium oxide would be fine for them too, as my research points to, but clarification is always nice. Any pointers would be appreciated, and while I have scoured the internet for answers if I missed a prior post somewhere that may answer these directly please point me towards it, as i must have simply missed it. I have seen a post here or there that has mentioned it, but I usually get 50-50 answers, or half answers... I dont have a lot of fab experience or mechanic experience, outside of hydraulic and pneumatic stuff I did in the military and with how hard it is to source stuff in the US, id rather not wing it and hemmoraghe money lol. Thanks guys! Sorry for the monumental first post haha
    • Yep, there's a very minor drift left that happens a few seconds after letting go of the steering wheel, but not enough to bother me. Enjoying the car still!
×
×
  • Create New...