Jump to content
SAU Community

Recommended Posts

A couple of weeks ago I was in a cab on my way to Melb airport when the driver pointed out a new speed camera.

Rather than the usual camera in a car on the roadside, this one was a radar/speed detector & camera on a small tripod about 2-3 feet high and a silver metal box about .5m squared all sitting on the kerbside, with seemingly noone else around.

I saw another on High St Glen Iris yesterday lunchtime, not far from Malvern Rd intersection.

One each side.

I think I may have been clocked doing 65 in a 60 zone as I was a bit slow in noticing it.

These are going to be huge cash cows for the greedy Vic govt as they are no where near as obvious as the usual cars with tinted windows.

I spoke to a courier yesterday arvo, as they are always on the road. He said his brother-in-law was clocked speeding by one of these, but was not fined as (supposedly) they are still in the testing phase. I'll get back to you on that, pending my letterbox drops. :D

Anyway, here's a pic (taken from a crappy Nokia phone) so you can get to know your enemy. :(

post-18271-1221174996_thumb.jpg

Edited by Mean_R34
Link to comment
https://www.sau.com.au/forums/topic/235764-new-speed-cameras-lurking-in-melb/
Share on other sites

  • Replies 43
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Surely these are too easy to take care of with a baseball bat? Or even just pushing them over?

there would be some1 lurking around nearby looking after it ... its a potential cash cow 4 the government... they would definately look after them

i work at a landfill i might talk to some truckies .... get the to use there bin grabber early one morning .. and just pluck it up from the side of the road .. and keep going ... be perfect and no one would know .. in about 4hours after that we would have burried it in like 85tones of more rubbish and building scrap

best way to find out ... park next to it for about 10mins .. turn car off ... im sure if they think something is up they will come over to investigate .. your not doing anything wrong .. be on your phone to make it look legit tho

Who cares if it is 'legit'

I've parked infront of the parked car speed camera's before (was near where i was staying).

Stuff em.

The dude came out and said he was trying to operate a speed detection device and i was in his camera's line which affected it.

I said, ye i know, and asked if i could move it, i said nup. Went inside :)

He also said it took a little while to setup etc

So must have been a pain in the ass :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...