Jump to content
SAU Community

Recommended Posts

  • Replies 374
  • Created
  • Last Reply

Top Posters In This Topic

Ummm its a 26 dude......

So how did this thing go in Autosalon?

3 words

semis+dyno=fail.

customer left his semis on and it would not ride the rollers.... only spin....i was not there on sat to tell him to swap on some hard shitty tyres but offered to be there on sunday to tune it to suit the ramp rate only to be told not enough time.. very dissapointing.

Due to the ramp they were using most cars were off but those who took the time to quickly tune to the ramp rate did well.. darrens supra pulled well over 1100hp on sunday (to take out top spot, then they put the GAS car back on to beat it.... ) but pulled 700hp the day before... dwayne from hi-torque did a stellar job to bring it up to suit the dyno conditions.... if only we had a chance to do the same, im sure we would have pulled mid 900's based on sats results.

EPIC FAIL

these were the only words required.

I knew the car wouldn't run the numbers in real world testing under competition conditions.

Edited by DiRTgarage
Having seen what drag radials do on dyno rollers, I'd be kicking the owner in the arse for not swapping them for something hard and shitty.

X2. I couldnt crack 350 hp on semis then spun it out to over 500 with some hard streeters.

were people cleaning the rubber from their faces?

I remember watching the mighty BU5TER on the rollers at Powercruise at ECR and they turned to mush and sprayed everyone with melted rubber. It was spectacular but not great for big numbers.

LOL dont hold back paul, tell us what u really think

hehe... :)

Hey i call it like it is...it upsets people and rubs them up the wrong way on occasions but thats their problem.

He had his chance to prove all the naysayers wrong...and with all eyes on him he was foolish to not ensure the car was up to it.

I may have been too generous with my 800hp prediction. :(

Edited by DiRTgarage

Amatuers at their best. All that time effort and money for a dismal result. Oh well better luck next time.

And maybe Autosalon should notify all competitors on what ramp rate they're going to use so everyone can tune their car accordingly. What a load of crap. Take it to the track where the true results are revealed.

465.3 KW/624 HP :/

yeah something like that, same as the supra on saturday (bout 300rwkw short and 650-700hp on sat, then retuned on sunday pulled 1200hp).... all in the dyno operator.... it would have been easy to pull the right numbers with a bit of tuning to suit the way they were running....

Edited by URAS

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...