Jump to content
SAU Community

Recommended Posts

e36 m3 are awesome, i think 3.0s are more livey standard than 3.2s thanks to less refined factory suspension set up.

a mate of mine won rally tas in an e36 m3r about five years ago. his was an awesome car and he had an top suspension set up using ground control coilovers, eibach springs, thicker bars and tops. his 3.0 engine was good for 210kws at the wheels, but before he lost a battle with cancer this year he had been working on a 3,400cc engine that would have been good for 330 at the wheels. his plan was to do a small production run of them called the m3rs for tarmac rallying that looked just like a standard m3r, but with factory high-rise wing, carbon panels, 18s, big brakes, motec, titanium exhaust and plenty of other goodies... i'd still like to put one together and stick it to the dirty porsches like he planned to again

  • 5 months later...
  • Replies 80
  • Created
  • Last Reply

Top Posters In This Topic

Well u have written off the idea of getting a Cossie to import (i dont even have a house with a garage so crazy to import one :P )

So that leaves me with a bit better budget. I can stretch it up to 25K Australian, so now entertaining the idea of an E46 M3, 350Z or 968CS. But then i look at the prices of sorted EVO IVs and they are less then 5,000pounds.

Has anybody driven a 964 Porsche? I have only driver earlier model 911 which has the shitty seating position and pedal position. Are 964s still cursed by this?

I am still thinking E36 M3 is the best all round bet...but E46s are not that much more expensive, are way better cars and the thought of importing it after 12 months makes way more sense then with an E35 or E30 325iS

I have looked at Skylines but thinking that if i stretch the dollars a little further then a friend can garage it for me over there and when he comes back at Xmas he can import it for me. So looking for a car that makes sense to import. Something European would be cool as i will be following the Tour De France up to day 9 where the plan is to leave the Tour an drive through Andalusia, through Lake Zahasa on the way to Bay of Biscay. Should be a pretty fun 21 days if driving through all those cool roads, especially if i can squeeze in a day at Jerez

Lookd at M5s, but the age and cost of servicing etc puts me off them, also the fuel economy thing. I want an Exige but...lol i dont have the 60k for one :blink:

Needs to be rwd, reliable or at least not cost the earth for parts and ready to eat plenty of kms and do some track hack stuff. M5 is appealing as it has plenty of space

If i am getting an E30 it will be a 325is. As cool as the E30 M3 is they are way too expesnive for what they are. 325is with its 6 cylinder for 1/4 of the money is the go.

Have found a nice E36 Evo M3 (does anybody know what the Evo designates?) It has APs, some suspension work and breathing mods. Looks neat too although he is asking top money for it. Still under Aus$15,000 so hopefully my mate gives it a clean bill of health

If i am getting an E30 it will be a 325is. As cool as the E30 M3 is they are way too expesnive for what they are. 325is with its 6 cylinder for 1/4 of the money is the go.

Have found a nice E36 Evo M3 (does anybody know what the Evo designates?) It has APs, some suspension work and breathing mods. Looks neat too although he is asking top money for it. Still under Aus$15,000 so hopefully my mate gives it a clean bill of health

yeah i know the E30s are already overpriced, but how much are they in the UK? a good one here is $60K! a decent E35 can be had for $30K or so, so keep that in mind when buying a 36. I can't remember what the EVO model gets, probably some body bits, maybe a bit of carbon here and there. sht like that. always worth getting the 'special' models though. if it's good it sounds like a winner. and when you bring it back to aus you can flog it to me cheap as I love the 36s too and they are half the price and twice the car of an E30. but only half as cool. :blink:

Well just waiting for a friend to inspect and test drive, then comes the "breaking of thee's balls over price" . I am too nice when buying stuff hence why my mate will be offering sound financial advice when he goes into negotiations. :D

Hopefully it comes off. This looks to be a nice enough example that i import it back to Aus. Though a friend pointed out that i should just export my R32 for the drive around?!?!? Sounded silly at first until we discussed it. Do you have to cancel local rego if you are going to export your car for a few months? I just think itsd easier to bring my garbage home then it is to export my garbage ;) Plus we have just short listed a dirty Ford as well that is cheaper, more fun but no doubt a waste of money :)

...and yes i look at TVRs forthnightly. I want one bad, but even i am too practical and do not want to be spending too much cash on fixing stuff. The later the model the better, but they are all well over 20,000pound

Well u have written off the idea of getting a Cossie to import (i dont even have a house with a garage so crazy to import one :P )

So that leaves me with a bit better budget. I can stretch it up to 25K Australian, so now entertaining the idea of an E46 M3, 350Z or 968CS. But then i look at the prices of sorted EVO IVs and they are less then 5,000pounds.

Has anybody driven a 964 Porsche? I have only driver earlier model 911 which has the shitty seating position and pedal position. Are 964s still cursed by this?

I am still thinking E36 M3 is the best all round bet...but E46s are not that much more expensive, are way better cars and the thought of importing it after 12 months makes way more sense then with an E35 or E30 325iS

LOL Roy,

you have come to the right man!

yep i have driven a 964 porsche and i liked it so much i brought this

post-28646-1237352033_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • @Murray_Calavera  If I were an expert I wouldn't be in here looking for assistance.  I am extremely computer literate, have above average understanding on how things should be working and how they should tie together.  If I need to go to a professional tuner so be it, but I'd much rather learn and do things myself even if it means looking for some guidance along the way and blowing up a few engines. @GTSBoy  I was hoping it would be as simple as a large vacuum leak somewhere but I'm unable to find anything, all lines seem to be well capped or going where they need to be, and when removed there is vacuum felt on the tube.  It would be odd for the Haltech built in MAP to be faulty, the GTT tune I imported had it enabled from the start, I incorrectly assumed it was reading a signal from the stock MAP, but that doesn't exist.  After running a vacuum hose to the ECU the signal doesn't change more than 0.2 in either direction.   I'll probably upload a video of my settings tomorrow, as it stands I'm able to daily drive, but getting stuttering when giving it gas from idle, so pulling away from lights is a slow process of revving it up and feathering the clutch until its moving, then it will accelerate fine.  It sounds like I need to get to the bottom of the manifold pressure issue, but the ignition timing section is most intimidating to me and will probably let a pro do that part.  Tomorrow I'll try a different vacuum line to T off of, with any luck I selected one that was already bypassed during the DBW swap. @feartherb26  I do have +T in the works but wanted to wait until Spring to start with that swap since this is my good winter AWD vehicle.  When removing the butterfly, did it leave a bunch of holes in the manifold that you needed to plug?  I thought about removing it but assumed it would be a mess.   I notice no difference when capping the vacuum line to it or letting it do its thing.  This whole thing has convinced me to just get a forward facing manifold when the time comes though.
    • Update: tested my spark plugs that are supposed to be 5ohms with a 10% deviation and one gave me a 0 ohms reading and the rest were 3.9ohm<, so one bad and the others on their way out.
    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
×
×
  • Create New...