Jump to content
SAU Community

Recommended Posts

I'm not driving the car much on the street anymore- suspension is too harsh, exhaust too loud etc. for it to be very comfortable to drive. Just going to use it for the odd trackday, so not concerned about drivability anymore. If I was, I wouldn't remove the 2530 :)

Link to comment
https://www.sau.com.au/forums/topic/2381-hks-turbo/page/4/#findComment-433868
Share on other sites

  • Replies 99
  • Created
  • Last Reply

Top Posters In This Topic

ok, i might be opening up a can of beans that'll spill into what should be another thread but........ what would be cheaper, if you wanted to have a weekend car, and a track day car..... a worked gts-t, or a worked gt-r, both having say...... 600hp at the engine? or would there be too many variables involved? just running on my train of thought here

Link to comment
https://www.sau.com.au/forums/topic/2381-hks-turbo/page/4/#findComment-434569
Share on other sites

Hah now that question deserves a long, opinionated answer...

Depends on size of budget (is $5,000 cheap or is $30,000 cheap?), driving style, access to facilities or contacts, maintenance budget etc. etc. You could write a book on it (I'm sure someone has).

Bottom line (in my humble opinion, and stated a million times in other posts)..

* GT-R's cost more initially, increasing performance costs less, marginally higher upkeep

and the inverse for GTS-Ts. Get a 180sx - cheap to buy, cheap to improve performance, cheap to maintain.

Link to comment
https://www.sau.com.au/forums/topic/2381-hks-turbo/page/4/#findComment-434575
Share on other sites

Kinda got sidetracked - as for some dyno figures...

Rick Shaw has a 2540 on his personal car (it's up for sale btw, as you would expect it's immaculate and everything has been rebuilt) and has dyno'd ~230kw at his shop. That was at 1 bar boost - his standard fuel system limited this.

Link to comment
https://www.sau.com.au/forums/topic/2381-hks-turbo/page/4/#findComment-434672
Share on other sites

Ezekrael

as far as clutch choice goes, a search should reveal all the info you need.

for around 900 fitted got me my extreme single plate ceramic button clutch with sprung centre. many members are using this clutch and its very usable. I think its good for 450hp, which means it should be fine unless you upgrade your turbo again and shoot for over 250rwkw.. then again whatsisname has over 250rwkw and that was his clutch choice too.

evo- fuel pumps are INTERNAL on 33's and yes can still hear buzzing. No std turbo not good for 230rwkw.

for HKS relevance heres my GT2530. i am assured by the supplier (a friend of a friend, who is the friend of the guy who bought the turbo new in japan!) that this turbo has done less than 2000km's in japan, cost me 1800bucks. Took it to ATS for inspection and they confirmed its perfect.

Link to comment
https://www.sau.com.au/forums/topic/2381-hks-turbo/page/4/#findComment-434710
Share on other sites

Originally posted by SLY33

evo- fuel pumps are INTERNAL on 33's and yes can still hear buzzing.  No std turbo not good for 230rwkw.

SLY 33, how loud is your 044?

- mine I can only just hear it with the ignition on but engine switched off. I have a nismo exhaust with dual muffler so it just purrs at idle, but I cant hear the pump at all.

I wouldnt be in a hurry with the extreme clutch - mine was good for about 6 months then it started dying. I know a couple of other guys who had problems running just over 300rwhp.

I ended upgrading to a os giken twin, wish I had gone that way in the first place.

Nice score on the turbo by the way, you'd have to be happy:)

Link to comment
https://www.sau.com.au/forums/topic/2381-hks-turbo/page/4/#findComment-434911
Share on other sites

the buzings not that loud but when the exh isnt booming i can hear it. During summer when it gets warm the buzz gets quite loud.

Apparently the extreme clutch doesnt like to be slipped, when i got mine i was told that if i tried to slip it each take off it wouldnt last long, and to just let it out and it would be fine. ive had mine about 6 months, lots and lots of launches, no troubles yet...

Link to comment
https://www.sau.com.au/forums/topic/2381-hks-turbo/page/4/#findComment-435061
Share on other sites

Steve: The one pictured is a 52T, but I also have a 56T trim. Actually, the one pictured is damaged (turbine wheel) but I hope to get it repaired soon, if it can be repaired. The 56T I used on my EVO4...how can you tell if it's the current or older model???

What's the difference with your turbo? Do you have a pic?

Link to comment
https://www.sau.com.au/forums/topic/2381-hks-turbo/page/4/#findComment-435573
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi all, Restoring r33 series 1 rb25det. All the heater hoses were on their way out, have replaced them and put it all back together. After testing I noticed a small leak from behind the head on the actual metal water line to the turbo when cars warm. I tried running a longer hose over it but it kept leaking...   I am about to take the (stock) manifold off again😔 to change the water line does any one have any lines they recommend? I was looking at Aeroflow Turbo Oil & Water Line Set but not sure what everyone else recommends. Car is completely stock but want to upgrade turbo eventually. it looks like ill have to disconnect a lot just to replace these lines so if there's anything else recommended to do please let me know. Thank you in advance!
    • From memory, on the R33 GTSt at least, while everyone says "It's not adjustable", I found when I changed clutches in mine, it just needed a small adjustment on the rod length. But be very wary here, as you could end up trying to push the pushrod in the master too far, or blowing out the slave.   Most likely though, if the master/slave isn't bypassing internally or leaking out, then the throw out is the wrong height compared to the fingers on the clutch, so when it moves to disengage the clutch, it isn't 100% disengaged. You can check part of this out too by jacking the car up, having the engine running, put your foot on the clutch and try to engage 1st gear. If it goes in pretty easy (Compared to the ground) and/or the wheels start turning a fair bit and it takes a bit too much brake pedal to bring them back to a stop, this is likely the issue.  I'm not sure if you can adjust the height of the forks etc in these though, it's been that long since I've touched any RB gearbox.
    • That's all good, I thought I was missing some interesting feature! Maybe @PranK can double check if that is something that is meant to be operating or not.
    • I hope that is not something that bad. From what i remember he said that only first gear is "hard" to get in and that he has couple of ideas what to try next but idk 😕  hope it is not gearbox out. I will let you know.
    • If it's not the hydraulics, it is probably gearbox back out. Usually as per @Duncan's post, or otherwise associated with not getting the throwout fork positioned correctly. All the way up to catastrophically bolting shit back together without it being aligned properly and wrecking the clutch/input shaft/flywheel/something else.
×
×
  • Create New...