Jump to content
SAU Community

Recommended Posts

Hi guys,

Where have people bought there forged pistons from? I've been looking around and Acl seem to be the cheapest but I cant find where to buy them apart from Repco and they want over $2k!!!! Cp's are around $750 US from the states, is there anywhere in Australia that are selling them at about that price! JUST WANT MY CAR BACK ON THE ROAD!

Cheers

Link to comment
https://www.sau.com.au/forums/topic/238120-where-to-buy-forged-pistons/
Share on other sites

to add to the post above. can someone confirm Hks, tomei etc make their own pistons?

i know Jun were done by cosworth, i'd think piston making equiptment to be quiet expensive.

so many things are outsourced these days. i'd suspect only a few places world wide who actually make them.

to add to the post above. can someone confirm Hks, tomei etc make their own pistons?

i know Jun were done by cosworth, i'd think piston making equiptment to be quiet expensive.

so many things are outsourced these days. i'd suspect only a few places world wide who actually make them.

Most are made to spec, i use alot of the jap pistons (TRUST) purely cause they have a nicer crown design (especially SR20) and the tolerances (and ring packs) are far superior, yes they are outsourced but no the are not shelf items. I have even tried to buy direct from the manufacturer and they will not supply.... actually deny even making them.

Edited by URAS

Yeah i would have gathered they are made to spec, who actually makes them?

I figure, Mahle still make their own, along with cosworth perhaps too? and possibly one of the american companies maybe wiseco??

Are there any oversized pistons out there for under a grand? Just cash strapped at the moment! The vl guys seem to like hypatech! Do they make them for Rb26? What are they like?

many out there for under 1k.. look at the website i posted.

550-800us = 700ish for the lower scale and just under 1000 for top.

i bought Mahle pistons and pauter rods from these people came to just under $1800 @ .95c conversion a few weeks back..

did not take much time to get here at all.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It was a great, but typical track day, and some VB was ingested at the night time debrief 🤪
    • And so, to round this out, I couldn't be happier to confirm @MBS206 has decided to buy the car. He drove down from sunny QLD with a trailer last week and it is off to its new home today. I'll let Matt confirm on next steps but I understand broadly that the plan is to leave it pretty much as is, and just get some quality wheel time with a nicely balanced car that is pretty much track ready. There are a few a jobs still to be done first but nothing too major and I think its a very smart buy Dinner last night at the Paragon with a round of VBs (mostly) for Neil
    • Well, 50 pages and the end of a chapter for this car. We took it out for a shakedown at Wakie yesterday, and everything went well. There were a couple of niggles: - Oil cooler fitting leak - tightened, cleaned, stopped leaking - Radiator cap overflow fitting was leaking....Mark called it, the overflow fitting was threaded in and not tight....tightened, tested and held pressure - Small oil leak at the rear of the block, probably the turbo oil feed - too hot to get at it comfortably but probably just needs to be nipped up - leak at the driver's side rear brake line where it meets the hardline. Fitting wasn't loose, so Matt backed it off and back on, no further leaks - there's also a leak somewhere on the top of the fuel tank, maybe that cross over fuel line - that was has been left to fix when its on a hoist Otherwise than those niggles the car went great, turned great and stopped great so it was a very successful day out. I'm always really nervous when a car first hits the track after a long break, especially with a brand new engine as well but it was great. VID-20251011-WA0007.mp4  Big thanks to @The Bogan who dropped by and helped out, @MBS206 and my nephew Lachlan the apprentice.  Neil's wife Mel also surprised the hell out of all of us by dropping by; she's up in Tamworth these days but was travelling to Melbourne so had plausible deniability for turning up at the garage, it was great to see her but also obviously a bit sad all round.
    • Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
    • Unsolicited advice? Keep the engine as close to stock as you can. Nothing wrong with adding some boost and making a little more power, but given where you are, you really don't want to try to make it into a monster. I can't imagine the roads are up to it, and the lack of locla support when it grenades will be a ball ache. FWIW, If there is a dyno around that you can access, then brand new injectors are a good idea, which will lead you to (at least) putting a Nistune in it, which will allow you to put an R35 AFM on it, all of which will make it possible to make it much much nicer to drive and live with.
×
×
  • Create New...