Jump to content
SAU Community

Recommended Posts

its not that the tanks have to be majorly different

its that only 1 brand of tank has paid for the required R&D to be able to certify they are safe

and they charge a mint for their tanks

Just got an email from PJ (Paul) and he just ran 503 rwhp on the JEM dyno with 25 psi on a 3076 and 1.12 exhaust housing on E85 with 1600cc indy blue injectors.

He mentioned they did run up to 27.5 psi boost and made more power but were concerned for the intregity of the SR20 block as it wasn't sleeved.

376 rwks' has surely got to be a record out of a 3076 on any engine.....

He was frying 4th on the M5 :)

Mine will be getting tuned next week.

I made 348 at 19psi.23psi will be the aim next week, id like to see what 25psi makes on the RB though.

PJ also has water injection, so that would keep the air charge temps way down.

Im excited!!! :)

He was frying 4th on the M5 :)

Mine will be getting tuned next week.

I made 348 at 19psi.23psi will be the aim next week, id like to see what 25psi makes on the RB though.

PJ also has water injection, so that would keep the air charge temps way down.

Im excited!!! :)

Yes frying 4th at 160klm's.

He wasn't using the water injection in that 503hp dyno run.....insanely enough there is more power to come.

So he's found and extra 50 odd rwhp from the bigger ex housing, 1 psi more boost, upgraded fuel system, M&W CDI and retune.

He also mentioned EGT's were way down with the larger ex housing - as you would expect.

Been there done that. after a few sets of tyres you wonder what the fuss was all about in the first place.

With a 3076 tho? OK techically PJ is running a T25 flanged HKS 56 trim 3037 on a 2 litre.

Bigger turbo's on bigger engines make bigger torque so you'd kinda expect more fryability.

Edited by juggernaut1
With a 3076 tho? OK techically PJ is running a T25 flanged HKS 56 trim 3037 on a 2 litre.

Bigger turbo's on bigger engines make bigger torque so you'd kinda expect more fryability.

regardless of turbo / setup, you get over it after a while :)

regardless of turbo / setup, you get over it after a while :)

Haha....yes always modifying for that bigger "fix" once you get used to it.

I'm always fascinated how enthusiasts are raising the bar all the time - its amazing what people are screwing out of there motors these days.

However, what was awesome last year is average this year....and so on......where will it ever end. :)

Quick question people. What will 555cc injectors run out at roughly (kw) when using E85 on a gts-t?

About 340rwkw on std pressure using BSFC = 0.6(which is about what I've found).

BTW I've made just over 600rwhp on E85 using 60LB/hr(630cc/min) with 4Bar base pressure on an XR6T which confirms my BSFC calc of 0.6.

Just got an email from PJ (Paul) and he just ran 503 rwhp on the JEM dyno with 25 psi on a 3076 and 1.12 exhaust housing on E85 with 1600cc indy blue injectors.

He mentioned they did run up to 27.5 psi boost and made more power but were concerned for the intregity of the SR20 block as it wasn't sleeved.

376 rwks' has surely got to be a record out of a 3076 on any engine.....

I'm running RB25 with a .68 on a 3037 Pro S.

Standard Manifolds E85 etc etc.

post-46183-1246700127_thumb.jpg

Edited by RB25DETS2

that is some off the chart torque there champ....

must be hell of a ride...

what other supporting mods?

also at what revs is it making full boost?

Edited by allthewaytotheskyline
that is some off the chart torque there champ....

must be hell of a ride...

what other supporting mods?

Yeah mate lots of fun.

Just the normal stuff

PFC

HKS Turbz

850 Sard injectors

Blitz LM cooler

Blitz POD

Standard BOV

Z32 AFM

Nismo FPR

Bosch 044 in tank

Gizzmo EBC

oh and lots of boost :D (23psi)

where is the torque read out?

Heres a torque read out just for you GT....180or200's car in red (3582 .82) and mine in blue(3037 .68) overlayed on the same Dyno.

post-46183-1246776429_thumb.jpg

Heres a torque read out just for you GT....180or200's car in red (3582 .82) and mine in blue(3037 .68) overlayed on the same Dyno.

900nm, nice.. my car was making around 1080nm to 1180nm but it never had a aggresive tune, 500cc don't make too much difference.

Yeah mate lots of fun.

Just the normal stuff

PFC

HKS Turbz

850 Sard injectors

Blitz LM cooler

Blitz POD

Standard BOV

Z32 AFM

Nismo FPR

Bosch 044 in tank

Gizzmo EBC

oh and lots of boost ;) (23psi)

standard internals? 23psi??

what's with people running massive boost on un-opened engines?? i think hamish is like 23psi as well on his 33?? :P

The pressure from pre-ignition is far greater, since E85 doesnt have that problem should be fine! I've seen Lee's car hold 30 psi on the road on a cold night, that was radical!

Edited by 180or200

well i would presume (based upon what ive read) due to detonation and all, with e85 which dies off once it hits its top end of power instead of detonation that it would be much safer to push more boost without the knock.

although...i may just be wrong.

people still think that E85 is the ticket to more safe power. This is not the case! you are still limited to the engines internals.

it is easier and safer to make the power but if you are using standard internals or have a weak engine it will still break.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...