Jump to content
SAU Community

Recommended Posts

Hey All,

Well I’ve heard a few mixed stories...

I've been told that I should be warming up my car for around 5 mins or so when my car is cold..

I've also been told that warming up a car is bad, And can fowl plugs and eventually damage rings etc..

Can someone please give me a straight answer?? As I want to do the right thing by my car.. But all these stories are confusing me.. ;)

Thanks

Beck

Link to comment
https://www.sau.com.au/forums/topic/240585-warming-up-your-car-right-or-wrong/
Share on other sites

Just turn it on and start driving, however drive it at low revs below where your turbo boost starts to develop until the water/coolant and the engine oil has warmed up.

Once they are warm, boost away!

Cool! Thanks heaps hey,

So is it true you can hurt your car (fowl plugs etc) by letting it sit running for a while?

Just turn it on and start driving, however drive it at low revs below where your turbo boost starts to develop until the water/coolant and the engine oil has warmed up.

Once they are warm, boost away!

What he said

Cool! Thanks heaps hey,

So is it true you can hurt your car (fowl plugs etc) by letting it sit running for a while?

I can't confirm the fouling plugs, etc... but when you warm up by just idling, different parts of the car warm up at different rates (i.e. the engine itself may warm up, but the gearbox, diff, etc will not as they're not doing anything). Gentle driving until everything is up to temp is much better as all of the parts warm up together.

On a cold morning I just let it idle for about 2-3mins, just to get the fluids circulating.

Then start driving it keeping off boost. Till about 5 mins of driving, it should be fine to hit boost.

I don't see how starting your car and letting it idle at any time could possibly be detrimental to your engine. A waste of fuel maybe. but yeah, what they all said re running off boost for a few minutes. I usually wait till engine temp gauge hits mid point.

Its true that modern cars can be started and driven straight away; i start my car and let the fluids circulate for about 1minute then drive without too much load until all the drivetrain, coolant and oil has reached operating temperature.

think about it; you warm your car up for 5 minutes so the coolant and oil is at operating temp but gearbox and diff are still cold so you may be actually hurting them if you drive it hard straight away.

I don't see how starting your car and letting it idle at any time could possibly be detrimental to your engine. A waste of fuel maybe. but yeah, what they all said re running off boost for a few minutes. I usually wait till engine temp gauge hits mid point.

ive heard somethings about glazing that my occur if you just let it idle for prolonged periods.

i do as everyone else, used to let it warm up, not any more.

OK. now is there a difference between auto's and manual's?

auto g'boxs fluid runs through the bottom of the radiator to warm it up,but how long

till it's warm? from start up to not causing damage whilst driving difference between auto and manual?

yeah glazing. thats what ive been told too.

i just start it, wait 30 secs, and drive off nice and easy till the oil pressure settles. then i absolutely smash it !!! ;) sometimes.

Edited by Munkyb0y

^^ Lol, Im just saying...

I don't really get into traffic jams, but at times where your driving to say the city and there is part were there can be a jam.

Not saying deliberatly drive to one.

Just turn it on and start driving, however drive it at low revs below where your turbo boost starts to develop until the water/coolant and the engine oil has warmed up.

Once they are warm, boost away!

Spot on couldnt have put it better my self

Surely our cars are "hi tech" enough that when left idling (eg. waiting for the missus at shops with air conditioning running!) to not fall apart if left just idling! Just doesn't make sense if it's true.

Mine is auto and won't change up to 4th until gear box is nice and warm.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
    • Heh. I copied the link to the video direct, instead of the thread I mentioned. But the video is the main value content anyway. Otherwise, yes, in Europe, surely you'd be expected to buy local. Being whichever flavour of Michelin, Continental or Pirelli suits your usage model.
    • Continental have consistently beaten the absolute shit out of every other performance tyre in Wet/Damp/Cold conditions and give up a little bit of time (half a second at most) in the dry. Almost like it's engineered for German conditions or something. I'd def give those a try.
×
×
  • Create New...