Jump to content
SAU Community

Recommended Posts

TWOOGLE has been pulled down and totally rebuilt by Mr Dirt himself and will be tuned by Godzilla. No longer a Croydon car what so ever.

The whole setup is being changed. I guess attitude has alot to do with how happy customers are with their workshop, if the customer is not happy for one reason or another then the customer is going to move onto another work shop. Plain and simple.

Firstly well done top effort and congrats to toprpm

I guess that is to crd's superior engine packages that have allowed rh9 and twoggle perform and exceed all expectations.

they are miles ahead of the rest. What happened to godzillas own gtr rumor has it had a bit of a melt down?

RH9 was never tuned to go outright in power without gas also under Crd's guidance it allways came out on top :( even under the most demanding and time constraints that they were given.

How do you know the figures to the exact when the owner doesnt?

Not correct rh9 has made 7hp more than weekends effort on crds dyno which crds dyno allways under read the mainline one

maybe they have no choice :D

  • Replies 55
  • Created
  • Last Reply

Top Posters In This Topic

they are miles ahead of the rest. What happened to godzillas own gtr rumor has it had a bit of a melt down?

i find this quite hilarious as godzilla's gtr is still quicker than crd/mario's gtr700 which hasnt been seen in a long time?

Alright Quote-ee the Happy Post Quoter. Let's break it down, shall we?

Firstly well done top effort and congrats to toprpm

That's a good start. Keep it up. :(

I guess that is to crd's superior engine packages that have allowed rh9 and twoggle perform and exceed all expectations.

Somewhat. They built the engine and it made good power but an engine is only as good as its tuneup.

they are miles ahead of the rest. What happened to godzillas own gtr rumor has it had a bit of a melt down?

And there you go ruining an otherwise constructive post with rumour-mongering and hearsay. How about just leaving the workshop whoring to the workshop whores. Oh wait....I see what you did there. And as for miles ahead of the rest, I'm not sure which part of 7.8 < 8.2 you're referring to.

RH9 was never tuned to go outright in power without gas

Never tuned to go outright in power without gas?!? With a properly designed and implemented nitrous install, tuning for outright power and outright nitrous-assisted power go hand in hand.

Not correct rh9 has made 7hp more than weekends effort on crds dyno which crds dyno allways under read the mainline one

7hp in 1000hp??? Not anything to crow about, really.

maybe they have no choice :D

I hate it when Marines come to my house with rifles and grenades and threaten to shoot me unless I change workshops. Oh wait.....I see what you did there.

Forgetting the silly buggers above, the point needs to be made that any RB that makes over 900hp is an insane bit of engineering and should be appreciated regardless of who built/tuned/washed/parked the thing. A bit of respect please.

Forgetting the silly buggers above, the point needs to be made that any RB that makes over 900hp is an insane bit of engineering and should be appreciated regardless of who built/tuned/washed/parked the thing. A bit of respect please.

I guess respect is in the eye of the beholder Adrian, When you see a car like Mark's or Theo's getting caned hard run after run on the drag strip Or Russel and Marks 32 running 53's at qr sprint the respect is mucho Hombre.

The cockfloppers at auto salon who do nothing other than give them a quick spin to peak revs with an undriveable turbo and a fog shot are not in the same league as those dudes.

To each their own as the saying goes but respect is earned, not asked for.

maybe they have no choice :P

You know full well Nick what the score is...yes i had no choice.

Stacey and I were loyal customer's of CRD for 5+ years, always flying the flag for them...whether it be online, in magazine articles, DVD features, and even CRD's advertising material. In turn we had an excellent relationship with Jim and the team at CRD on both a proffesional and personal level. We are extremely fussy who we have work on our car as we have invested a lot of money and time in it. I wouldn't have been a customer there for all that time and spending every opportunity to premote their business where and when i can if anything but top class workmanship and tuning was being performed. Unfortunately support at the track when we were attending events and competing was lacking for some reason. At some events i attended on my own with no crew and on occasions asked here on SAU for Sydney guys for help at the track...i guess they have a busy workshop and need to at least some of their time spend time with family and or away from the 'scene' relaxing...i accept that...no problem. But we are racers and want to have our car racing at every opportunity and thats something Godzilla Motorsport is able to support us with...simple.

Both are great workshops and two of only 3 in this country id be happy to leave my car with.

The point of this thread was to highlight the awesome result Mark has achieved with this car in such a limited time...im sure even better results are soon to follow when John and I hit the track in our respective cars when Mark has finished prepping them.

cheers

Edited by DiRTgarage
What happened to godzillas own gtr rumor has it had a bit of a melt down?

best not beleive everything people say...

Methanol + event hall full of people = Insurance nightmare

I think Marks car speaks for itself out on the track.

Congrats for RH9's figures without happy gas,

that is rather disrespectful to alot of tuners in the sydney area,

Unigroup engineering, GEM, etc. just because you build alot of skylines and have a dyno on premises doesnt make you a tuner. unless you have had tunes at a few different shops, you wouldnt know a good tune from a poor one.

Just the tune...hey don't get me wrong here, CRD in my opinion is the number one Skyline/GTR workshop in Sydney...their workmanship and tuning is top class...daylight second.
Just the tune...hey don't get me wrong here, CRD in my opinion is the number one Skyline/GTR workshop in Sydney...their workmanship and tuning is top class...daylight second.

they cant be that bad they built your engine... so im lead to believe.

Edited by URAS

Since when can an interstate car enter the autosalon? trying to kill off the competition?

Godzilla has been making a name for itself only in the last few years, like many SE QLD jap tuners they never last the distance with the exception of SUB ZERO (Dubui). Unlike the many Syd workshops that have produced the goods for much longer.

Edited by Alf

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I'm looking for some real world experiences/feed back from anyone who has personally ran a EFR7670 with a 1.05 exhaust housing or a .83 I'm leaning towards the .83 because its a street car used mostly for spirited driving in the canyons roads. I"m not looking for big numbers on paper. I want a responsive powerband that will be very linear to 8000 rpm. I dont mind if power remains somewhat flat but dont want power to drop off on top. The turbo I've purchased is a 1.05, although the mounting flange T3 vs T4 and internal vs external waste gates are different on both housings, I not concern about swapping parts or making fabrication mods to get what I want. Based on some of the research I've done with chat gpt, the 1.05 housing seems to be the way to go with slightly more lag and future proofing for more mods but recommends .83 for best response/street car setup. AI doesn't have the same emotions as real people driving a GTR so I think you guys will be able to give me better feed back 😀   
    • Surely somebody has one in VIC. Have you asked at any shops?  Is this the yearly inspection or did you get a canary?
    • This is where I share pain with you, @Duncan. The move to change so many cooling system pieces to plastic is a killer! Plastic end tanks and a few plastic hose flanges on my car's fail after so little time.  Curious about the need for a bigger rad, is that just for long sessions in the summer or because the car generally needs more cooling?
    • So, that is it! It is a pretty expensive process with the ATF costing 50-100 per 5 litres, and a mechanic will probably charge plenty because they don't want to do it. Still, considering how dirty my fluid was at 120,000klm I think it would be worth doing more like every 80,000 to keep the trans happy, they are very expensive to replace. The job is not that hard if you have the specialist tools so you can save a bit of money and do it yourself!
    • OK, onto filling. So I don't really have any pics, but will describe the process as best I can. The USDM workshop manual also covers it from TM-285 onwards. First, make sure the drain plug (17mm) is snug. Not too tight yet because it is coming off again. Note it does have a copper washer that you could replace or anneal (heat up with a blow torch) to seal nicely. Remove the fill plug, which has an inhex (I think it was 6mm but didn't check). Then, screw in the fill fitting, making sure it has a suitable o-ring (mine came without but I think it is meant to be supplied). It is important that you only screw it in hand tight. I didn't get a good pic of it, but the fill plug leads to a tube about 70mm long inside the transmission. This sets the factory level for fluid in the trans (above the join line for the pan!) and will take about 3l to fill. You then need to connect your fluid pump to the fitting via a hose, and pump in whatever amount of fluid you removed (maybe 3 litres, in my case 7 litres). If you put in more than 3l, it will spill out when you remove the fitting, so do quickly and with a drain pan underneath. Once you have pumped in the required amount of clean ATF, you start the engine and run it for 3 minutes to let the fluid circulate. Don't run it longer and if possible check the fluid temp is under 40oC (Ecutek shows Auto Trans Fluid temp now, or you could use an infrared temp gun on the bottom of the pan). The manual stresses the bit about fluid temperature because it expands when hot an might result in an underfil. So from here, the factory manual says to do the "spill and fill" again, and I did. That is, put an oil pan under the drain plug and undo it with a 17mm spanner, then watch your expensive fluid fall back out again, you should get about 3 litres.  Then, put the drain plug back in, pump 3 litres back in through the fill plug with the fitting and pump, disconnect the fill fitting and replace the fill plug, start the car and run for another 3 minutes (making sure the temp is still under 40oC). The manual then asks for a 3rd "spill and fill" just like above. I also did that and so had put 13l in by now.  This time they want you to keep the engine running and run the transmission through R and D (I hope the wheels are still off the ground!) for a while, and allow the trans temp to get to 40oC, then engine off. Finally, back under the car and undo the fill plug to let the overfill drain out; it will stop running when fluid is at the top of the levelling tube. According to the factory, that is job done! Post that, I reconnected the fill fitting and pumped in an extra 0.5l. AMS says 1.5l overfill is safe, but I started with less to see how it goes, I will add another 1.0 litres later if I'm still not happy with the hot shifts.
×
×
  • Create New...