Jump to content
SAU Community

Spliced Wiring Loom At Rear. What Is It For?

SSStagea

By SSStagea,
in Four Door Family & Wagoneers

 Share

Recommended Posts

SSStagea Enthusiast

SSStagea

Posted
Posted

Hi all, removed my floor panels in the boot of my RS4S today to run wires for an amp and found that there has been at some time a wire spliced into the loom that heads towards the drivers side rear of the car near where the fluid bottle is. The wire it is spliced into is Red with a thin black stripe along it. I have added a couple of pics at the bottom showing where it is.

Another couple of quick questions. Anyone know the part number for the badge that sits in the bottom corner of the front grille. My grille has been replaced at some time and it never had the badge replaced.

Also, anyone know how easy it is to remove the back seats? I want to run my amp wiring under there and also see if it needs cleaning underneath while I am at it.

Pics...

DSC00590.jpg

DSC00591.jpg

Mouseness Contributor

Mouseness

Posted
Posted (edited)

Grab a test light or multimetre, see if you've got constant battery on it, or ignition/acc power, brake/tail/indicator power etc. And rear windscreen wiper if you have it. What else electrical can be in the rear of a stag? The automatic tailgate closing motor, if yours is fitted with that also I guess. Can't think of anything else. Run through it all.

Usually all you'd be splicing into the rear harnesses for is trailer plug, tail light mods etc. Anything else you'd just splice into the harness toward the front of the car. Id say someones picked up a power down there for something previously in the back.

But if it's not in use, just open the scotch lock up and rip it out, tightly wrap a layer of electrical tape around where the scotch lock was contacting the copper so it doesn't corrode.

Let me know what u find =]

Edited by Mouseness
DaveB Mentor

DaveB

Posted
Posted

Just a point on the back seats...

I found them dead easy to remove; the bottom of the back seat has 2 x 12mm bolts holding it in, at the bottom at the front, they go through the carpet. One on each end of the seat near the door. Then the back seat u can just fold up or down, shouldn't need to remove it. There is a plastic cable tray running under the rear seat and up and under the back, right in the middle which you should be able to take advantage of , I did :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • sunsetR33
      Blue/grey smoke after idle

      By sunsetR33 · Posted

      Can't you put the pistons to TDC and then do the valve seals? Or will the drop down too far to pull them back up?
    • sunsetR33
      Replacing turbo water line - any recommendations or advice?

      By sunsetR33 · Posted

      One thing I can tell you is, do it properly the first time. If you encounter unexpected problems just let the car sit for a week or two if you have to get some other parts or figure stuff out.  I'd have said go and use as many OEM parts as possible but since you want to change the turbo later on a custom kit is probably the better choice. Since I have no experience with RB25 just compare parts diagrams and images before buying a line kit and it should be easy to see if it has everything you need. Amayama has very good parts diagrams and part number lists, that is what I used a bunch to figure out what I might need. And don't forget to plan ahead and possibly renew other stuff that's easy to get to while you're in there doing the turbo lines. Happy wrenching
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Update 4:   Hi all, good news. Engine is running and all the gaskets and seals seem to be working as intended. No leaks so far, even the JB Weld seems to hold. I flushed out the old coolant a few times and put in fresh coolant, not Nissan stuff, I decided to try the Ravenol Protect FL22, they claim it works for a wide variety of JDM cars and the opinions on it by some people were pretty good. And it has the nice poison green color! And man am I glad I bought a coolant system tester earlier this year, vacuum filling works wonders on this engine. I can definitely recommend this to anyone still doing it the old school way. All you need is compressed air supply. Will have to do a small test drive as soon as I can, I removed the gauge cluster again as the tacho needle was still bouncing around a bit but it was much better than before already.  I also found some cracks on all 4 tires inner and outer sidewalls. Apparently these tires should 't be parked on for extended periods or be kept under 0 degrees during storage, which I did not know. Clearly the previous owner didn't look into those details either, he probably bought them just cause they are cool semi-slicks. I'm just wondering how tf I am supposed to reach 30-80 degree tire temperatures on the public road consistenly, these tires were never going to work for my use case. I'll probably order Continental SportContact7 ones as these are the best allround summer tire available right now and I don't think I'll need anything crazier for now. Do let me know if you have experience with various tires and which ones you recommend.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      You have no idea how many goddamn boxes I received these past three months haha Most have been put to use by now though, luckily
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Not going to pretend I didn't do a bit of junky work this time around, but mostly due to the fact that some things I am not willing to spend days fixing right now, like wiring. I try to do most things properly the first time around.
×
×
  • Create New...