Jump to content
SAU Community

Trying To Identify Object Under The Dash.

SSHatch

By SSHatch,
in General Automotive Discussion

 Share

Recommended Posts

SSHatch Collaborator

SSHatch

Posted
Posted

I am hoping that somebody can tell me what this object is that was under the dash clipped onto the passenger side kick panel. It appears to have had an orange lid.

I have looked through the owners manuals, both the original Japanese one and the Aussie one supplied when complied, also the entire workshop manual but cant seem to find out what it is.

077.jpg

Its just another of the many things that went missing out of my car on its way to me from Japan.

In case it helps the car is an R32 GTR.

Thanks heaps to anybody that can let me know.

Johnny Veteran

Johnny

Posted
Posted

Yeah its a flare they use to signal highway traffic when they are pulled over to the side; it also provides light for changing the tyre.

now in europe they supply a reflector either inside the bootlid, a single rear parker light which stays on or a portable stand reflector.

oh and a majority of cars have their bonnet release on the passenger side to prevent you from havaing to face oncomming traffic.

SSHatch Collaborator

SSHatch

Posted
  • Author
Posted

ah cool.

Well if its a flare then it all makes sense why its not there anymore.

That one I can go with for a number of reasons.

Unbolting and taking my strut brace is a whole different story...

Thanks heaps guys.

gotRICE? Veteran

gotRICE?

Posted
Posted
They stole your strut brace?!?! Jesus, thats getting a bit too keen on their behalf.

A friend of mine bought a 5spd Maxima over to NZ from the States, someone stole the intake manifold off that... random or what?

Iron Chef Grand Master

Iron Chef

Posted
Posted
Yeah its a flare they use to signal highway traffic when they are pulled over to the side; it also provides light for changing the tyre.

now in europe they supply a reflector either inside the bootlid, a single rear parker light which stays on or a portable stand reflector.

oh and a majority of cars have their bonnet release on the passenger side to prevent you from havaing to face oncomming traffic.

Actually the majority of European cars have them on the left hand side because usually the manufacturer can't be bothered reconfiguring it for RHD cars - after all, you still have to get out the driver's door :D

The flares are all removed before they leave Japan, because they're considered a fire hazard by the shipping companies....

Johnny Veteran

Johnny

Posted
Posted
Actually the majority of European cars have them on the left hand side because usually the manufacturer can't be bothered reconfiguring it for RHD cars - after all, you still have to get out the driver's door :D

The flares are all removed before they leave Japan, because they're considered a fire hazard by the shipping companies....

I never thought of that before; was it a fluke lolz

This is on a landrover discovery 3 which is british and RHD but then again where are they made now; i heard india??

I had my flare in my r33 gts-4 back in 2001; i had some fun with that lolz.

SSHatch Collaborator

SSHatch

Posted
  • Author
Posted

Yeah thats one of the 149 pics I got of the car in Japan.

Was actually pulling the kick panel out to check the ECU and sort out a rattle when I found the clips on it which reminded me of the pic with the orange thing in it. I figured it was something like a flare but after the other stuff had been taken I thought I may as well ask the question.

Beer Baron Grand Master

Beer Baron

Posted
Posted
The flares are all removed before they leave Japan, because they're considered a fire hazard by the shipping companies....

dunno about that. none of the cars i've imported/exported had the flares removed for shipping? a lot of compliers remove them but I haven't ever seen them removed in japan.

Iron Chef Grand Master

Iron Chef

Posted
Posted

Hmmm...may just be the guys at the docks in Kobe?? Either way, they're never in the car when they land here. Whoever's doing it, it would be one hell of a party if the ones collected were all set off at the same time.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Just_a_datsun
      RB26 block, rb26 head

      By Just_a_datsun · Posted

      Block bump. $400. As above cyl 6 needs bore or sleeve.
    • Kinkstaah
      Blue slip

      By Kinkstaah · Posted

      I would think making the argument that the travel is limited by a spring flexing against a spring perch as "the same method". Later on in the document they do state that the spring can't bind on full bump travel and cannot come loose in full rebound travel as well. (which is all very sensible). The laws are actually pretty sensible and reasonable. It's just that the people who enforce and check them don't actually read them or know them accurately. "Oh, coilovers? Instant fail mate. Don't even need to look at it." - Guy who will be instantly reported by me. There is probably merit to people who do get defected for height also get defected for the suspension in that state that allows it. I did never consider the people who are complaining about coilovers being picked on are also running around at 50mm off the floor.
    • Kinkstaah
      Ethanol Content Sensor - Always at 11%?

      By Kinkstaah · Posted

      I think given SAU's knowledge of E85 we can strongly conclude that 10% ethanol in almost any situation is entirely fine. Almost all of the myths against E85 were overblown, let alone E10.
    • The Bogan
      Blue slip

      By The Bogan · Posted

      From your link See bold text, is this referring to damper settings, if so that may a issue for "some" inspectors, I cannot see aftermarket coilovers having the evidence that "must be available that its functional performance is equivalent to the original" Maybe just remove the adjustment knows and hope for the best???? Meh 5.2 Suspension travel In all instances, modifications to a vehicle’s suspension must ensure the integrity of the system and not compromise the ride quality. At least two thirds of the original suspension travel should be maintained in both directions (rebound (i.e. extension) and bump (i.e. compression)), and rebound must be limited by the same method used by the vehicle manufacturer or if this is not practicable due to the nature of the modification, an equivalent method. If an alternative method is used, evidence must be available that its functional performance is equivalent to the original.
    • Kinkstaah
      Blue slip

      By Kinkstaah · Posted

      They actually don't - They adhere to VSB14 rules just like Victoria. The rules are against CABIN adjustable height, and it quite clearly states that the height has to be within parameters. I asked the VASS engineer to confirm this when I got my car engineered and they refused to engineer the coilovers because they didn't meet the requirements for requiring engineering. (mine are height adjustable.) People "Not wanting to bother" with "Actually reading/knowing/adhering to the rules" should result in fines and immediately losing the ability to issue blue slips and/or RWC's in Vic.
×
×
  • Create New...