Jump to content
SAU Community

Recommended Posts

I told John Keen at hi Tech Dyno that i want at least 200kw at the wheels in my R32 GTR with just a cat back exhaust and he said that they should come standard with between 197-212kw at the wheels.

Should i get 200kw at the wheels with a cat back exhaust and how much boost???

Link to comment
https://www.sau.com.au/forums/topic/243311-stock-r32-gtr-power/
Share on other sites

get a vi-pic + 3 inch turbo back exhaust + i bar boost and you should get about 255 kw @ the rears

thats about what im getting

and pray you ceramic turbos dont fall apart

Edited by gazza750
Im getting 240KW on 10psi, HKS piping, Z32AFM + 3.5" exhaust

Fark thats pretty good!

10psi = +0.7 Bar (Approx), which is stock boost. You for real or you gota happy dyno LOL! :banana:

Was at a Dyno Day and saw a stock R32 GTR dyno and hit 155kW at all 4's

Then when doing some research, I read it was about 185kW at all 4's, so all dynos differ.

dynoed 1 a few weeks back..

220rwkw completely standard

WOW they only came from the factory brand new with 206KW @ the flywheel

so i dont understand how you get a drivetrain gain when its always a drivetrain loss

Thats the Japanese Manufacturers Gentlemans agreed value that all cars will not exceed.

Its been covered on the forums a number of times now.

Cause if the GTR only has 206kw then there is something seriously wrong with both my V8's that make more than that but dont perform as well.

Fark thats pretty good!

10psi = +0.7 Bar (Approx), which is stock boost. You for real or you gota happy dyno LOL! :rofl:

Was at a Dyno Day and saw a stock R32 GTR dyno and hit 155kW at all 4's

Then when doing some research, I read it was about 185kW at all 4's, so all dynos differ.

Yeah i guess all dynos will differ between results but for an odd 100kw is a bit extreme, ill post the dyno sheet up for a look see its approx 10-11psi making 238.4 (i think) at all four, this tune was done at Race Solutions in Sydney after putting a new engine in the car with the odd modification as said. Hmmm ill have to check it out tonight then :laugh:

Yeah i guess all dynos will differ between results but for an odd 100kw is a bit extreme, ill post the dyno sheet up for a look see its approx 10-11psi making 238.4 (i think) at all four, this tune was done at Race Solutions in Sydney after putting a new engine in the car with the odd modification as said. Hmmm ill have to check it out tonight then :rofl:

At all 4 wheels even... I was gonna say was it at the rear wheels.

LOL! All good then.

What engine did you put in? Like a new RB26 or N1?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Maybe also really stiffly sprung track cars. Get the inside wheel up in a corner and all the fun stops. Also me sometimes (rarely) when I have to stand on the brake to convince the diff to drive the wheel that is still on the ground when I'm trying to diagonally get over severe driveway entrance, etc.
    • I feel like I'm missing something. You had an authorised installer come out and install a new alarm. Post install the car doesn't start, and you aren't getting the installer back to fix what they did wrong?
    • So either way it is gearbox out and look what is wrong?  I know about the input shaft bearing. Even before swap/new clutch the it sounded exactly like this: So is that inout shaft bearing or the other was installed backwards?  And can some please tell me the part number for that input shaft bearing? The gearbox is small box from R34 N/A and number is FS5W71C. Thank you  
    • I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
    • D2 and Ksport are essentially the same thing and basically just generic Taiwanese manufacture. Better than ChinaBay crap, but... not top shelf. Öhlins have got to be some of the best dampers around, so likely to be a good option. It's going to get to the point though where I suggest you buy from Oz. We have at least 2x excellent options here. If I were you though, I'd be talking to KW about doing something for the R33. There's bugger all difference between that and the 32. In GTR land, anyway.
×
×
  • Create New...