Jump to content
SAU Community

Recommended Posts

auto perfection, main north road near regency on the southbound side. big blue store, cant miss it. tell em anyone from sau (or just say steve) sent you, ric'll hook you up. :)

i had my alarm fitted at a.p. on the recommendation of everyone here and had/am having a bad experience, car is still off the road more than a week later! won't go into it on the forum but if someone wants a pm i'll share.

Nathan, my brother in law works for "a large car audio company" and has been fitting alarms for years, and does extra work out of hours. Let me know if you strike out with the other guys, as he can come to your place and fit it too.

Edited by Iron Chef
Nathan, my brother in law works for "a large car audio company" and has been fitting alarms for years, and does extra work out of hours. Let me know if you strike out with the other guys, as he can come to your place and fit it too.

wish i knew this b4 chef!

Nathan, my brother in law works for "a large car audio company" and has been fitting alarms for years, and does extra work out of hours. Let me know if you strike out with the other guys, as he can come to your place and fit it too.

Cheers Kristian i might go your option sounds sweet. Ill give you a buzz or email when im ready.

  • 9 months later...
Sorry Ash, if you you'd asked I would've mentioned it! It mustn't have come up in conversation at any stage. Hope the Evo is going well :D

Hi anyone know a reasonable place to get Alarm fitted?, or mobile ones come to you?, i have a rav4 2002 model with imobiliser in it, and central locking but just looking to add an alarm into my already central locking set up , guess you could call it upgrade, is i better i purchase the alarm first ? then call out the fitter?, or do they do both doesnt have to be a top notch alarm , just a standard entry level i guess..one where you can adjust the sensitivity to like a smashed window car jolt...etc im a Novice and just dont have any idea on what to look for or start thanks.... Cash jobs are ok too if you want it :D

Why on earth would someone's first post on SAU be digging up this old thread to find out how to put an alarm in his non-Skyline? Especially when everyone has answered the OP's question in the thread already?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • @Haggerty you still haven't answered my question.  Many things you are saying do not make sense for someone who can tune, yet I would not expect someone who cannot tune to be playing with the things in the ECU that you are.  This process would be a lot quicker to figure out if we can remove user error from the equation. 
    • If as it's stalling, the fuel pressure rises, it's saying there's less vacuum in the intake manifold. This is pretty typical of an engine that is slowing down.   While typically is agree it sounds fuel related, it really sounds fuel/air mixture related. Since the whole system has been refurbished, including injectors, pump, etc, it's likely we've altered how well the system is delivering fuel. If someone before you has messed with the IACV because it needed fiddling with as the fuel system was dieing out, we need to readjust it back. Getting things back to factory spec everywhere, is what's going to help the entire system. So if it idles at 400rpm with no IACV, that needs raising. Getting factory air flow back to normal will help us get everything back in spec, and likely help chase down any other issues. Back on IACV, if the base idle (no IACV plugged in) is too far out, it's a lot harder for the ECU to control idle. The IACV duty cycle causes non linear variations in reality. When I've tuned the idle valves in the past, you need to keep it in a relatively narrow window on aftermarket ecus to stop them doing wild dances. It also means if your base idle is too low, the valve needs to open too much, and then the smallest % change ends up being a huge variation.
    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
×
×
  • Create New...