Jump to content
SAU Community

Gt35r Vs Garrett T04z - Discussion (just Post In This Thread To Create A Database)


Recommended Posts

I believe that plot is for cerbera (the other simon), not quite as full on as the original.

Agree T04GTR, my 35r is far from boring (esp rwd) but it doesnt compare to the nothing nothing bang and scream to the limiter of a mates hks t04z - but he is cheating with a jun stroker :P he also has awd so its not a very fair comparison I spose.

I believe that plot is for cerbera (the other simon), not quite as full on as the original.

Agree T04GTR, my 35r is far from boring (esp rwd) but it doesnt compare to the nothing nothing bang and scream to the limiter of a mates hks t04z - but he is cheating with a jun stroker :P he also has awd so its not a very fair comparison I spose.

Ahh fair enough :)

My GT35R should be on in a month or so and I will post the tyre frying results :(

I believe that plot is for cerbera (the other simon), not quite as full on as the original.

Agree T04GTR, my 35r is far from boring (esp rwd) but it doesnt compare to the nothing nothing bang and scream to the limiter of a mates hks t04z - but he is cheating with a jun stroker :down: he also has awd so its not a very fair comparison I spose.

come on i was carrying an extra 400kg than you too so i think the stroker is fair :P Pity u never took me for a spin to compare it though, looks like i'll have to wait a while

Simon aka R32-GTS is who DCIEVE is talking about (I think :)). Too much headwork to compare to any old 26 with a T04Z

It's Cerberas graph.

I used that one instead of Natallottos because Cerbera has no head porting, and just mild 270 degree cams.

The 35R has been scaled 5% to take into account its on a hubber.

It's the closest thing I could get to a fair comparisson between the two, and subsequently, I've just purchased a 35R.

hey how did yours come up michael? obviously happy with the results!

here is a link to our car running a HKS TO4Z setup at the Bathurst sprint a few weeks ago, overall the results we pretty good but takes abit to get use to as we are use to running small twin setups.

we limited boost to 25psi which made approx 430 awkw's on the rollers, fiddled with cams a fair bit whiched helped the middle alot, i think full boost was around 4700 - 4800.

http://au.youtube.com/watch?v=lf6opg6Mdt0

cheers russ

p.s i prefer more response, but the single rush was good too. wouldnt be as much fun on a tight track

Spoolup has a to4z on his rb30det.

There's a few dyno sheets on the link below.

http://www.spoolimports.com/content/SpoolImportsR33.asp

R34 NEO head - HKS 272 / 9.35 cams, Performance Valve Springs

Garrett T04Z turbo 0.96 ex housing

23psi 581rwhp.

The boosts knee so to speak appears to be a little after 4000rpm.

A pair of 272 10.5mm lift cams would work much better on his setup.

As for a GT35 pushing more than a genuine 400rwkw (535rwhp) on the RB with pump fuel. I'm not a believer. :)

Edited by TheRogue
As for a GT35 pushing more than a genuine 400rwkw (535rwhp) on the RB with pump fuel. I'm not a believer. :D

Thats unfortunate, it has been done time and time again and all going well I'll hopefully be able to post a plot for another one in a month.

It's Cerberas graph.

I used that one instead of Natallottos because Cerbera has no head porting, and just mild 270 degree cams.

The 35R has been scaled 5% to take into account its on a hubber.

It's the closest thing I could get to a fair comparisson between the two, and subsequently, I've just purchased a 35R.

From the horses mouth :D

My 35R is so close to being on I can feel the happiness in my pants stirring :D

hey how did yours come up michael? obviously happy with the results!

here is a link to our car running a HKS TO4Z setup at the Bathurst sprint a few weeks ago, overall the results we pretty good but takes abit to get use to as we are use to running small twin setups.

we limited boost to 25psi which made approx 430 awkw's on the rollers, fiddled with cams a fair bit whiched helped the middle alot, i think full boost was around 4700 - 4800.

http://au.youtube.com/watch?v=lf6opg6Mdt0

cheers russ

p.s i prefer more response, but the single rush was good too. wouldnt be as much fun on a tight track

Hey Russ,

yep we are only running 20psi at the moment, 330kw, fair way short of the big T04Z. havent touched the cams. full boost around 4300rpm. Will get to QR at the first Timeattack and see how it goes.

I'm thinking down the track try some fuel and 26psi. :D

Maybe for superlap!! :D

we limited boost to 25psi which made approx 430 awkw's on the rollers, fiddled with cams a fair bit whiched helped the middle alot, i think full boost was around 4700 - 4800

Sounds almost like he'd have been happier with a GT35R :D I'm pretty sure that power would be achieveable with 25psi on race gas, and in my experience a GT35R feels a bit more lively underfoot than a pair of GT2860-5s.

yeah, I'm thinking 26psi and some good fuel, I should touch up 400kw on the 2.6 35R combo. will look at that hopefully for superlap! :D

Between the gears, down low it's just awesome. Can't wait to put more boost into it, I'm sure it will come alive.

defo, would be great

post the link! :)

not that we want to go too off topic, but heres my on-car footage.

http://au.youtube.com/watch?v=g8aiGRO5Ifk

yeah, i just think the 35 is boring compared to t04z, besides hks doesnt do a gt35 equivalent.... lagmaster ftw. :)

Correct. The closest thing that HKS have to a GT35R is the GT3240 (rated by HKS at 580hp), which is a GT35R with a cut-back rear wheel and 0.87 housing ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • I can ship Nismo floor mats to you: https://www.oemsoko.co.jp/products/nismo-floor-mats-for-skyline-r33-bcnr33-stagea-wgnc34?_pos=1&_sid=9278c1467&_ss=r  
    • Here's the link: https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6642/misc/G49?frame_no=WGNC34-137122 What you think about it? The same product i found on nengun: https://www.nengun.com/oem/parts/40567/MiPwn5qAMfCfmpxHNDnwn5q9MDAx8J-QiW9sZC1qcC0xMTAtRzQ5LS0wMDE/Floor+Carpet+%2F+Mat+2/0688339eba149c19 Bot i have spoken to 😅 ensured me, that mats are 100% original, oem product. I have my doubts. I also heard what you mentioned, that nengun often offers items that are actual not available... On the other hand mats i found on japanese yahoo or ebay are in poor condition and still quite expensive so i'd rather wait for some better offers. My location - Poland. We literaly don't have ANY market for used Stagea parts so need to search outside Europe.
    • You can’t see much on the other side as the lcd is there I don’t think it’s the same as the m33 beside it as the markings on top is not the same was hoping someone had a good quality photo or if they just happened to have the unit in hand, quickly take the cover off and take a photo to clearly show the marking on top to identify the diode   the unit is currently with an electronics repair shop so I can’t take another photo at the moment hopefully they are smart enough to know if it’s a zener diode or not
    • I'd be very surprised if you can buy new OEM mats. But if you can, I want some too!  Do you have links to the variations you found? Also, where are you located? I found that Nengun is happy to list items to purchase but when you do buy them you'll get an email that it's actually discontinued. As far as I know the variations in floor mats are different colour schemes as well as automatic and manual having a slightly different shape. The automatic ones fit into a manual car without issues, but I think you'd have trouble fitting the other way around. I have photos that show the shape difference if you care. FWIW I bought sets of used floor mats in decent condition at yahoo auctions.
    • Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
×
×
  • Create New...