Jump to content
SAU Community

Recommended Posts

Hi guys

I'm new to turbo car and I just got a 33 GTS-T

Does a stock R33 GTS-T have blow off installed from factory ?

Must all turbo cars have blow off valve installed ?

cuz I've never heard the blow off sound from my GTS-T

I'm sorry if this is a stupid question. I'm really new to turbocharging. Got not much idea about it

Link to comment
https://www.sau.com.au/forums/topic/246591-blow-off-in-stock-r33-gts-t/
Share on other sites

Hi guys

I'm new to turbo car and I just got a 33 GTS-T

Does a stock R33 GTS-T have blow off installed from factory ?

Must all turbo cars have blow off valve installed ?

cuz I've never heard the blow off sound from my GTS-T

I'm sorry if this is a stupid question. I'm really new to turbocharging. Got not much idea about it

welcome to sau.

All skyline turbo's came with a factory blow off valve.

Due to the law, the air released from the bov is put back into the system and not vented out into the air.

Aftermarket blow off valves vent the pressurized air into the atmosphere making a louder noise. (These blow off valves are illegal for road use and have known to cause idle problems)

However the factory blow off valve is loud enough to hear if you have removed your standard air box and replaced with a pod filter.

Circled in red if the factory blow off valve on a r33 i think.

bov33ug7.jpg

Hey there dude dont feel stupid for asking questions thats why everyone is on this forum site. I am also new to skylines not RB motors but skylines i also have a r33 and i have placed pictures for you .

bov33ug7.jpg

^^^^^^^^^^^^^^^^^^^^STANDARD AIR BOX WITH COLD AIR INTAKE (CAI) INCLUDES FILTER INSIDE MODIFY THIS WITH A K&N HIGH FLOW FILTER

RAMPOD.jpg

OR PUT A RAM POD FILTER ON IT ^^^^^^^^^^^^^^

cheers rob

Welcome......and it sounds like you've got some reading to do :P

http://www.skylinesaustralia.com/forums/Sk...ne-t113261.html

http://www.skylinesaustralia.com/forums/Fo...ick-t66556.html

http://www.skylinesaustralia.com/forums/Fa...nce-t35442.html

http://www.skylinesaustralia.com/forums/Li...als-t35048.html

These links hold valuable information. Browse through them and take some time to read them. You'll find many interesting topics and they will help broaden your knowledge about your car.

Super happy fun times :)

  • Like 1

Thanks for accepting me hehe

I will do the reading yea =)

so basically just replace the stock air intake with aftermarket filer (any?) and I will be able to hear the stock BoV sound right ?

oh and can someone confirm me that the aftermarket BoV is illegal ? what could be a problem from it ?

Thanks again guys

I'm sure you will see my stupid questions again in the very near future cuz it could be really stupid that the links posted above don't have the answers

- -"

probably best to stick with stock for now.

but a small breakdown of bovs are:

atmospheric- completly illegal, emit the air that is meant to be recercuilated back into the system straight out to the world.... the are the loudest and if your car isnt tuned, can cause issues

plumb back - ones like in the pictures above. these are bovs that do send the air back into the system, it is what a stock bov is but you can also get aftermarket plumb back models.

you can also get bovs that emit half atmospheric/ half plumb back

Honestly, its hard to say what is legal/illegal apart from standard parts, because it depends entirely on the cop who pulls you up if he doesnt like your aftermarket bov, even if it is plumb back...epecially considering they are cracking down on "hoons" these days...

so the only thing you can be sure of is that your standard bov will be fine.

Hope this helps,

Adam

If you get a pod filter just don't get an oil one. if you put too much oil on it, it can dirty your AFM. just get a dry pod. Apexi, K&N take your pic...

Pretty sure all K&N filters are oiled, mine sure is.

Cars that are untuned have issues with atmo bov's not aftermarket plumb backs, they are fine.

Keep the stock bov mate, or buy a new one and leave the stock one in the garage for later just in case.

And if your going to get a pod filter then i also recommend keeping your stock air box in case you want to go back to being silent, trust me, i did.

Thanks for the comment

I still wanna know why untuned cars have prob with atmospheric bovs ?

Aftermarket plumb back bovs also give no sound right ?

If just changning the air filter make the stock bov sounds, I might consider doing that

cuz I just wanna have a bov sound :D

Untuned cars have problems with atmospheric blow offs because the amount air which is sucked into the engine through the filter and passed the air flow meter (measures quantity of air being drawn into the engine) is used in the calculations the computer makes to ensure the correct mix of fuel and air is sent into the combustion chambers. When the blow off valve releases some of that measured air into the atmosphere the engine thinks it has more air than it acutally does and ends up running rich and basically like a dog becuase it has put the correct amount of fuel in for the measured air quantity. Basically your engine will not like you if you install an atmosperic blow off on a standard untuned car.

Greetings and welcome to SAU!

buy a boost controller and ramp it up to 13 psi, then it will be louder :unsure:

Dont bother replacing your blow off valve, its just a total waste of money. The stock one performs great. Save the cash for go-fast mods :(

If your going to buy a pod filter, dont bother spending big bucks on one, any cheap one will do, as a lot of the brands use the same filter element. So your basically just paying for the brand name. Just make sure its a dry filter not an oiled filter. Mine cost 30 bucks and works like a dream. Like has been said, oil from the oiled filter variety can enter the air flow meter and cause all kinds of extremely annoying problems.

if you install a pod filter, you will also need to enclose it fully as its illegal to have one un enclosed. You can either bend one up yourself out of some galvanised or aluminium sheet, or buy a plastic ready made one off ebay.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...