Jump to content
SAU Community

Recommended Posts

  • Replies 92
  • Created
  • Last Reply

Top Posters In This Topic

PM sent NYTSKY.

Friday is the cut off people. Maybe monday if your lucky :(

Deposit paid.

Getting manifold

Wastegate plumbed straight off the housing of the turbo

And ceramicoating

:)

Hey,

Thats odd... I just text him and he told me low mount is stock location... He will be on here to reply a post soon, just keep an eye out

did you ever find out.

I'm trying to reserve a spot for an rb26 stock position low mount ceramic coated manifold.

but not having any luck raising anyone, just for the record. If I can get a PM confirming a spot,

a price, and how/who to pay I'd pay.

Does anyone know if you can run the standard intercooler pipes with the rb25 low mount setup

Also with the low mount/external gate setup, where abouts does the external gate usually go

Mike.

Hi All,

Sorry for my late reply, I flew to sydney for the weekend to help my sister move.

To answer some questions:

1: I cannot do stock position low mount manifolds for RB20/25. There is simply NO room for a manifold, if anyone has ever back to back tested those cheap stainless manifolds, they actually spool later and make same or less power in my experience. I have seen this on 2 cars, one with standard hiflow, the other GT35. The problem is room, the turbo points straight at the engine, and is about 2" from the head face. Just not doable to any decent standard. Sorry:(

2: My RB26 low mount manifolds are standard position, I have done many of them, and never had a single car have "surge issues" without a balance pipe. I don't have time to go into massive detail right now about it, but there is absolutely no need for a balance pipe. If anything, its the worst thing you could do for spool and HP. Think of a divided manifold and turbo, your trying to use pulse tuning by keeping the gasses divided all the way to the turbo, similarly to a twin turbo on a 6, front 3 runners go to one turbo, the back 3 to the other. Running a balance pipe would be like drilling a hole clean thru the divider in the split manifold. Compressor surge happens when the turbo's are trying to flow more air into the engine than it can consume at that RPM and load point. So how the hell is running a balance pipe between 2 manifolds suddenly going to make the engine flow more air so it no longer compressor surges?? It can't, and won't, and if anything, IMO would actually make it worse due to poorer pulse tuning.

If anyone has back to back tested them and found the opposite, I'd love to hear from you. Otherwise my point remains. Another thing is that the other manufacturers don't use merge collectors. While you might think they look all neat and free flowing, we did a manifold for Rob Baraks Evo3, which had a VERY similar design manifold to those low mount 26 manifolds, and by changing to my manifold, picked up 380rpm of spool (huge) and 31kw at all 4. The air hits the turbine so efficiently and with such velocity with a merge collector that I would find it hard for the air from one turbo to effect the other.

3: All my manifolds are designed to suit 3 litre bottom ends. Regardless of what you order, be it RB20 or 25, it will still sit low enough that if you went to a 3 litre bottom end you would have ample bonnet clearance. I own a R32 skyline myself with a 26/30 in it and this was used to jig up most manifolds. We can fit anything from a T28 all the way up to a GT55 under the bonnet, with anything in between.

If anyone has any specific questions, please email me directly at [email protected], and I will reply in more detail there. Please make your order here with Leon tho as I appreciate his efforts to start and run the group buy and taking one payment from him for all goods will make life a lot easier.

Kind regards,

Kyle

6boost.com

0410 730 598

Edited by 6BOOST

Forget balance pipes, guys, and whatever you do, don't compare a properly designed merge-collector manifold to a chinese P.O.S. in stainless.

If you need to know what a poorly designed manifold can do to your engine, ask me to send you through the bill for my engine rebuild.

And everybody in the group buy needs to tell me what turbo and gate they are running, not just high/external, as I could build everything from a T28 high mount with a 38mm gate for a RB26 up to a GT55 high mount with 60mm gate. So please give Leon details of what flange/turbo you want to run and what size gate. I recommend minimum 44mm and if you haven't purchased a gate yet, the new turbosmart 50mm. If you need gates with manifold contact Leon about arranging one with your manifold from me at cost price.

Regards.........................6BOOST

Thanks Kyle for that info. Again here is the bank details.... Ill send out a group PM to everyone who was already put down a deposit and another one to the fellows who are waiting on answers, just to let you know that kyle is now available to help, as im just a customer not a manifold expert :P

If interested full payment is needed by FRIDAY so i can get the moneys off to kyle to get there babies ordered

National Australia Bank

Acc Name: Leon Minic

BSB: 084-792

Acc Number 79-164-3300

I'm out, sorry.

Stock position would be nice (and cheap), but just out of interest, how much would a custom dump and front pipe be?

Cheers

-Reece

I'm out, sorry.

Stock position would be nice (and cheap), but just out of interest, how much would a custom dump and front pipe be?

Cheers

-Reece

Could possible still use standard dump just might need custom front pipe. But may also need to modify cooler hoses and intake pipe. Maximum $500 from my local mechanic... dont know about yours though

Kyle, a few questions

1) What is the largest turbo you can run for a low mount RB25/30? im not worried about keeping factory location, only want low mount.

2) I run a 3L bottom end, but the block wasnt ground flat on the exhaust side where it bolts to the head, so my standard manifold fouled (ended up having to grind 5-10mm off the flange) Will your manifolds bolt up without any problems?

Edited by MintR33
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...