Jump to content
SAU Community

Recommended Posts

Hey guys

some of you saw my car at the meetup, just posting a few pics of the new rims on the car

19 x 9.5 +17 - 265/30/19 Dunlop SP Sport Maxx

19 x 10.5 +17 - 295/30/19 Michelin Pilot Sport 2

imo the right size 19" rim doesnt actually look small on the v35.

i also have Nagisa Auto Rear Camber, Rear Toe, and Front Camber arms in order to make the rims fit.

Running -2.5 Degrees Camber all round.

I also installed some HKS Kansai sway bars too. They make a MASSIVE difference to the body roll and handling of the car. A must have first mod for Everyone!

Car has been lowered, it is sitting on TEIN Comfort Sport Coilovers. I think they are at the max it can go in terms of height adjustment. This made the biggest difference to the look of the car, as a low V35 looks AWESOME!

one thing i planned for, is that i currently have 10mm hubcentric slip on spacers on order, so that i can bring the front rims out, bringing the offset of the front to +7. I would of ordered them in +7, but RAYS dont make them in that offset. Its +17 then +4...... big jump.

only 2 pics i have. enjoy.

-mark

GTS1.JPG

GTS2.JPG

Edited by BLISTC
Link to comment
https://www.sau.com.au/forums/topic/247485-new-shoes/
Share on other sites

Is -2.5 degree a bit too much for daily driving ? I had my R33 previously set to around this, as I took it to track once in a while, and it wears out the inside half of the tyres real fast... as it's driven more on the street basically daily.

Link to comment
https://www.sau.com.au/forums/topic/247485-new-shoes/#findComment-4298239
Share on other sites

hey guys thanks for the replies.

ive seen some V35's with 20" and in some photos it just looks too big. i reckon the best fitment would be 20" Rear and 19" front but then i dont know what that would look like.

-2.5 degree camber is alot, but all i do is going to get the tyres swapped around every 10,000kms or so, so that they will wear a bit more evenly. making the car look good comes at a price unfortunately.

PS. i also had to roll the rear guards as well to get that offset rim under the car

Edited by BLISTC
Link to comment
https://www.sau.com.au/forums/topic/247485-new-shoes/#findComment-4298638
Share on other sites

Good work, looks nice and I hope you don't forget to switch the tyres with the Camber your running...

some people forget unfortunately wasting tyres early in the piece.

nah i wont forget

its something i always keep an eye on and do and have done with my last 2 cars also

Link to comment
https://www.sau.com.au/forums/topic/247485-new-shoes/#findComment-4300623
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...