Jump to content
SAU Community

Any Alfa Romeo Specialist In Melbourne ?

rs73

By rs73,
in Victoria

 Share

Recommended Posts

rs73 Grand Master

rs73

Posted
Posted

Need a favour...

My brother in law (yes, I know, what was he thinking?) bought an 2001 Alfa Romeo 147 Selespeed with 80,000km on the clock, privately from Sydney without having done all the usual used car buying 'homeworks' properly.

Instead of putting it on a car transport, he and a friend flew to Sydney and drove the car down to Melbourne themselves.

Made it around 500km+ just before Albury when he rang me up telling they're stranded. Apparently the car's transmission had died, possibly from overheating or prolonged highway use. It practically just won't shift to any gear and kept dropping out to Neutral.

Thank's to RACV he and the car got home safely, although got stung by very expensive tow bill. That should teach him a lesson to do his homework next time.

Now he needs to find an Alfa Romeo specialist that could fix the issue he had with the gearbox as he need to have it RWC and rego transferred within 14 days.

Does anyone know any good mechanic in Melbourne area that know Alfa Romeos common problems particularly auto gearbox?

Thank's....

jesiotrot Enthusiast

jesiotrot

Posted
Posted
My old man has used Pur-Sang Automobiles for years, they used to be in Coventry St Sth Melbourne but have moved to Fitzroy I believe...

They have moved, and are now called Maranello Motors. They are in Colebrook St Brunswick. They are Alfa experts too, their workshop is always packed with them.

rs73 Grand Master

rs73

Posted
  • Author
Posted

Thank's for all the input, I've fwd them to my bro in law so let him sort it out himself...

I know Alfa is not really the most reliable car out there but what can he do, the egg has been broken, might as well beat it and cook it into an omelet.

R31Nismoid Grand Master

R31Nismoid

Posted
Posted
try here....there great with alfa's the best alfa mechanic

:P

Although - 500km's on a freeway, that wasnt the problem.

Problem is the car must have been pharked to start off with. No doubt sawdust on the inside of that gearbox :(

rs73 Grand Master

rs73

Posted
  • Author
Posted

Yeah, no wonder it's cheap... $10k, not a little money, but at a few grands cheaper than what others advertising, or willing to part with, there must be a 'catch'...

and I don't think he'd appreciate ylwgtr2's suggestion... as bad as the car goes, he's a student and $10k is a lot for him to loose $9900 in exchange for a $100 wrecker's drive-in price, so he'd be better off spending a few more grands fixing the damn thing

Jezza-gtR Mentor

Jezza-gtR

Posted
Posted

Ewwww selespeed :P

I'll speak to some of the boys at work who do the alfa's and see if they can help you out.. without spending big bucks ;)

I work for Zagame in west melbourne, bad choice on an alfa though, i trust my '89 31 to be more reliable than any new model alfa haha :(

rs73 Grand Master

rs73

Posted
  • Author
Posted

West. He's got the numbers from some of the suggested places above, and might try to ring around tomorrow.

Car may need a tow though, as I just sat in the passenger seat and he drove around the block, the car would only go into 1st, occassionally will go to 2nd, but ocassionally won't shift up and back to Neutral. No Reverse gear at all.

Whirring noise sound like dying gearbox oil pump or something. Not good to try to drive it himself anywhere out of our quiet block.

rs73 Grand Master

rs73

Posted
  • Author
Posted

Still here mate, still in the Skyline world... with a V35 non-turbo now... retiring from the glory of the boosted world...

But just getting a bit busy with my new job, with a lot more variations to do...

rs73 Grand Master

rs73

Posted
  • Author
Posted
selespeed is a known prob with alfas...

ps, where you been, rianto??

Yeah when I was in the passenger seat and looking at it, I wasn't very impressed.

Also the way to switch the selespeed to a full auto mode is not very good, with a button in the middle that seems to stuck,

took him half a minute just to switch it to full auto mode...

Well the good news is he took his car to one in Essendon as it's the closest to home, and they' ran a diagnostic tool on the car,

looks like it wasn't the actuator or the pump as both had given out any error codes.

Sounds like it's the spline shaft or something... should know the verdict by tomorrow...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      NC MX5

      By The Bogan · Posted

      Yeah, it's getting like that, my daughter is coming over on Thursday to help me remove the bonnet so I can install the Carbuilders underbonnet stuff,  I might get her to give me a hand and remove the hardtop, maybe, because on really hot days the detachable hardtop helps the aircon keep the interior cool, the heat just punches straight through to rag top I also don't have enough hair for the "wind in the hair" experience, so there is that....LOL
    • joshuaho96
      Cas issue

      By joshuaho96 · Posted

      Could be falling edge/rising edge is set wrong. Are you getting sync errors?
    • joshuaho96
      Jacks that fit under GTR lips that can reach the subframe?

      By joshuaho96 · Posted

      On BMWs what I do because I'm more confident that I can't instantly crush the pinch welds and do thousands of USD in chassis damage is use a set of rubber jacking pads designed to protect the chassis/plastic adapter and raise a corner of the car, place the aforementioned 2x12 inch wooden planks under a tire, drop the car, then this normally gives me enough clearance to get to the front central jack point. If you don't need it to be a ramp it only needs to be 1-1.5 feet long. On my R33 I do not trust the pinch welds to tolerate any of this so I drive up on the ramps. Before then when I had to get a new floor jack that no longer cleared the front lip I removed it to get enough clearance to put the jack under it. Once you're on the ramps once you simply never let the car down to the ground. It lives on the ramps or on jack stands.
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Duncan
      Mistakes were made, my R34 Story

      By Duncan · Posted

      Nice....looking forward to that update
×
×
  • Create New...