Jump to content
SAU Community

Recommended Posts

Hey guys, stock afm's maxed about at 410 rwhp and 16psi, there's a fair bit more in the turbos and am looking for max 400rwk, has anyone done the RB20 swap? As far as i'm aware it's a menu option on the pfc- what's involved in wiring these in? are the plugs simple cut and shut? Other options are Z32- you have to cut and shut the plugs for these to yes? The nismo option seems to be similar in cost and without plug mods so feedback welcome- cheers!

Link to comment
https://www.sau.com.au/forums/topic/248839-r32-gtr-afm-upgrade/
Share on other sites

nismo afms are my pick, but new NISSAN Z32s work well too. I have seen a fair few people having problem with the bosch sourced Z32s though. plenty of people use them without problem, but like I said Ive seen quite a few with problems too. so yeah, for me it's nismo or nissan genuine Z32.

Thanks for the feedback fellas, like the idea of new afm's too- speaking to a wrecker I use a bit he reckons RB25 series 1 and rb20 afm's are the same deal, and 125 ea. as opposed to the minimum grand for the newbies. I could almost justify selling the pfc and getting a map sensor based ecu and with not having to buy new afm's not being too out of pocket at the end of the day also.

Twin rb20 or 25 AFM.s should do the job with only the larger piping causing issues. Should be able to get them on here for around $50 each. IMO twin z32's are overkill, as they will max out at over 500rwkw, and have poorer tuning resolution compared to 20/25 units.

See for yourself the air flow volumes versus the voltage output. By my reading there is sod all between the Nismo & the Z32's. The main difference is the Nismo item can be fitted to a stock airbox.

http://www.nismo.co.jp/en/products/competi...26dett.html#afm

I would be interested in seeing the same curves for the Rb20/Rb25 units as I have heard some widely different stories about their capacities.

DO NOT USE NON GENUINE AFM.

We have had so much proplem's with aftermarket cheap copies that customer's source from who know's where.

Use genuine only.

We have OEM Z32 AFM in stock if that help's.

You will need to re-wire them in to suit but if you need info, more than willing to help.

Genuine Nismo are VERY good but make sure its genuine from nismo, not a cheap ebay copy, buyer beware (Ebay)

Edited by EFI Performance

Just on AFM's

Even though 2nd handies are cheap - they fail too often.

Maybe its my dumb luck, but ive had 2x bung sets of AFM's now in 6 months on my car.

One set failed big time, the other set i have in there now are slowly failing so no doubt will be stuffed in a month or 3...

So long term, the new AFM's might come out cheaper, i just dont have 1k for Nismo's at the moment, and i cant find a decent set of 2nd hand GTR AFM's to get my by lol.

Also too,

Make sure they are mounted correctly. More often than not a failed AFM is the result of broken solder joins in the AFM.

If they are bouncing around the engine bay this is accelrated quite rapidly.

6 months for an AFM, Id be looking at another cause of the problem. An AFM component failure under normal opperating conditions is actually pretty rare.

Yeah RB26 ones - when you think about it... they are 15years old give or take.

So it comes as no surprise to me :)

Dont worry about my mounting or anything, its all firm. I had a set in there that were fine, they were a loan set from a mate and worked flawlessly... but i had to give them back :P

So its not the plugs, i've done the whole trial/error thing so im 100% its the AFM's playing up.

They were both 2nd hand sets (stuffed ones), so im not surprised. New or known low KM ones have always been fine

I mean most Elec based things with Nissan seem to last about that time.

Coil packs, CAS, AFM, Ignitor - all seem to play up much more pronounced after the 10year marker is crossed, and 15years, just go buy a new one if it fails if you can afford.

I just need to find a genuine low KM set that hasnt been bashed around!

Sometimes you get lucky, sometimes you dont!

Just in case anyone wants to know, the RB20 series 2/R33series1 afm's plug straight into the rb26, you can even stretch the inlet pipes over the 80mm rubber inlet snout on the front turbo, you need a pice of 3'' bent pipe to do the rear around the power steering res. Running 20psi reading 4.5 volts. And they're cheap.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...