Jump to content
SAU Community

Recommended Posts

Hello. This and SDU are the only English-language Skyline sites I can find. I'm not Australian, but maybe you folks can help a Yank in need.

I have an R32 GT-R and I recently got new tires. I drove around for a while and I noticed that when I go over 70km/h, the steering wheel will slightly start moving to the right, but the car will stay straight. As I slow down, the steering wheel will straighten out again. It's kind of scary. This only happens sometimes. Also, when the HICAS light is on, it doesn't happen at all. This didn't happen before I put the new tires on, but I don't see how new tires would be the cause. The tires are the same size as the old ones.

Is the HICAS system doing this? I had a mechanic check the steering rack and he said it was fine. He's the same guy who put the tires on. I trust this guy since he's been my mechanic for a while and I know he won't BS me. I told him about the problem, but when he test drove it....it didn't happen (of course).

He recommended that I remove the HICAS system regardless of what is causing the problem.

I'm completely new to Skylines. I came from years of driving Impreza WRXs, but defected to Nissan.

Thanks in advance!

Link to comment
https://www.sau.com.au/forums/topic/248978-r32-gt-r-hicas-problem-help/
Share on other sites

in thery hicas is meant to disable itself at high speed

so when you go over 70 its disabling but its default position is a bit off

so get a rear-wheel allignment i guess?

last sunday i ripped my hicas rear end out and replaced the whole subframe with a non-hicas one, i win :blush:

Firstly, if the HICAS light is on, that's an error, and HICAS is disabled.

Back to the problem at hand. You had all 4 tyres replaced? Or just front / rear? How are the tyre pressures? Did you get a wheel alignment with the new tyres? Have you checked the power steering fluid level?

As you know when you get new tyres you need to do a wheel alignment front and rear for GTR's as they are 4WD...

Did get one done?

Then check your HICAS Fluid.

HICAS is suppost to help you with your turning / handling.

As you drive over 80km/h and turn the wheel, the rear wheels are suppost to turn 1 degree in the opposite direction to help with the cornering.

mine does this sometimes aswell.

tur on the car...take of and when you hit sixty the steering wheel goes all wobbily. if you try put steering wheel straight it turns left. stop turn the car off and start it again and its fine :)

my mech said easiest fix would be get rid of hicas using a lockbar...so thats what ima do

  • 4 weeks later...

Hi All,

Has anyone found a definative 'fix' or solution to the problem "higeki" raised as I'm now having the same problem as him with the steering wheel turning to the right - it will eventually flick the car momentarially and the steering wheel will re-align itself back to straight and will drive normally?? But it's the scariest feeling when the car flicks like it does...

May need to look into a full wheel alignment asap?

Cheers,

Adrian

mine does the same

i have an aftermarket steering wheel which causes the hicas light to come on during long strait journeys.

my tyre pressures and alignment is fine (just got done)

when its happening i just turn off the car for a second, allowing the turbo timer to keep the car on, this turns off the hicas light and the problem goes away :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi all,   long time listener, first time caller   i was wondering if anyone can help me identify a transistor on the climate control unit board that decided to fry itself   I've circled it in the attached photo   any help would be appreciated
    • I mean, I got two VASS engineers to refuse to cert my own coilovers stating those very laws. Appendix B makes it pretty clear what it considers 'Variable Suspension' to be. In my lived experience they can't certify something that isn't actually in the list as something that requires certification. In the VASS engineering checklist they have to complete (LS3/NCOP11) and sign on there is nothing there. All the references inside NCOP11 state that if it's variable by the driver that height needs to maintain 100mm while the car is in motion. It states the car is lowered lowering blocks and other types of things are acceptable. Dialling out a shock is about as 'user adjustable' as changing any other suspension component lol. I wanted to have it signed off to dissuade HWP and RWC testers to state the suspension is legal to avoid having this discussion with them. The real problem is that Police and RWC/Pink/Blue slip people will say it needs engineering, and the engineers will state it doesn't need engineering. It is hugely irritating when aforementioned people get all "i know the rules mate feck off" when they don't, and the actual engineers are pleasant as all hell and do know the rules. Cars failing RWC for things that aren't listed in the RWC requirements is another thing here entirely!
    • I don't. I mean, mine's not a GTR, but it is a 32 with a lot of GTR stuff on it. But regardless, I typically buy from local suppliers. Getting stuff from Japan is seldom worth the pain. Buying from RHDJapan usually ends up in the final total of your basket being about double what you thought it would be, after all the bullshit fees and such are added on.
    • The hydrocarbon component of E10 can be shittier, and is in fact, shittier, than that used in normal 91RON fuel. That's because the octane boost provided by the ethanol allows them to use stuff that doesn't make the grade without the help. The 1c/L saving typically available on E10 is going to be massively overridden by the increased consumption caused by the ethanol and the crappier HC (ie the HCs will be less dense, meaning that there will definitely be less energy per unit volume than for more dense HCs). That is one of the reasons why P98 will return better fuel consumption than 91 does, even with the ignition timing completely fixed. There is more energy per unit volume because the HCs used in 98 are higher density than in the lawnmower fuel.
    • No, I'd suggest that that is the checklist for pneumatic/hydraulic adjustable systems. I would say, based on my years of reading and complying with Australian Standards and similar regulations, that the narrow interpretation of Clause 3.2 b would be the preferred/expected/intended one, by the author, and those using the standard. Wishful thinking need not apply.
×
×
  • Create New...