Jump to content
SAU Community

Recommended Posts

Here are the road safety regulation requirements for licence plates...

Must not obscure the number plate in any way, ii. Must be clear, untinted and uncoloured, iii. Must have surfaces which are flat both on the side which faces the number plate and on the side which faces away from the vehicle, iv. Must have non-reflective characteristics and, v. Must have no unusual refractive characteristics. These requirements effectively prohibit number plate covers which have curved, domed, tinted or reflective surfaces from being fitted to a vehicle. Number plate covers which have lines or other markings on the surface which go over the number plate are also effectively prohibited. Regulation 222(2)(b) of the Road Safety (Vehicles) Regulations 1988 also requires that a number plate fitted to a vehicle must be clearly distinguishable and not be wholly or partially obscured.

Pretty sure they are uniform across all states.

pfft I've got one of those license plate covers with the black lines across it.

Driven past plenty of patrol cars and even had a patrol car tail me out of curiosity, and haven't had any problems

one of many rules in place that aren't really enforced I guess, there's all these p platers around my street with sh$tbox cars and cannon mufflers and they seem to get away with them even though they can't do modifications

Here are the road safety regulation requirements for licence plates...

Must not obscure the number plate in any way, ii. Must be clear, untinted and uncoloured, iii. Must have surfaces which are flat both on the side which faces the number plate and on the side which faces away from the vehicle, iv. Must have non-reflective characteristics and, v. Must have no unusual refractive characteristics. These requirements effectively prohibit number plate covers which have curved, domed, tinted or reflective surfaces from being fitted to a vehicle. Number plate covers which have lines or other markings on the surface which go over the number plate are also effectively prohibited. Regulation 222(2)(b) of the Road Safety (Vehicles) Regulations 1988 also requires that a number plate fitted to a vehicle must be clearly distinguishable and not be wholly or partially obscured.

Pretty sure they are uniform across all states.

So this confirms i'm correct by saying this car is now deemed as a possible defect????

whoop de doo

there are people starving in this world and your worried about a numberplate cover?

you really wasted our time replying to this with that reply???? There are people starving and your making random smart ass comments???

lol jkz

You also dobbed yourself in for using your phone/camera while driving.

I was parked and the keys weren't in the ignition :blush:

pfft I've got one of those license plate covers with the black lines across it.

Driven past plenty of patrol cars and even had a patrol car tail me out of curiosity, and haven't had any problems

one of many rules in place that aren't really enforced I guess, there's all these p platers around my street with sh$tbox cars and cannon mufflers and they seem to get away with them even though they can't do modifications

That doesn't mean they wont get defected, just that they are running the risk of being defected, and their are people who get done for number plate covers.... even on these forums ive found them.... but i'm 100% sure that this rta car will never get defected for it where as if you get a smart ass highway patrol car you still have the possibility of getting done.

Ok firstly:

How do you know its an actual RTA company car? Maybe its just someone that really likes the RTA? Or has the initials RTA?

And secondly are you sure its not just a number plate frame? not a cover?

Ok firstly:

How do you know its an actual RTA company car? Maybe its just someone that really likes the RTA? Or has the initials RTA?

And secondly are you sure its not just a number plate frame? not a cover?

its even got the lines going across the numberplate in the dodgey photo....

and RTA will not let anyone choose a numberplate starting as RTA, especially RTA.002

there are RTA cars from RTA.000 - RTA.999

also its a WHITE toyota Aurion = company car lol

So this confirms i'm correct by saying this car is now deemed as a possible defect????

Well no if you'll take the time to absorb what was written, it appears the licence plate cover you have pointed out falls within the legal guidelines ie: NOT illegal.

Must be clear, untinted and uncoloured, iii. Must have surfaces which are flat both on the side which faces the number plate and on the side which faces away from the vehicle, iv. Must have non-reflective characteristics and, v. Must have no unusual refractive characteristics. These requirements effectively prohibit number plate covers which have curved, domed, tinted or reflective surfaces from being fitted to a vehicle. Number plate covers which have lines or other markings on the surface which go over the number plate are also effectively prohibited. Regulation 222(2)(b) of the Road Safety (Vehicles) Regulations 1988 also requires that a number plate fitted to a vehicle must be clearly distinguishable and not be wholly or partially obscured

Looks flat and clear, no distortion and I can't see any lines on it.

You were able to take a clear picture of it weren't you? So...

Well no if you'll take the time to absorb what was written, it appears the licence plate cover you have pointed out falls within the legal guidelines ie: NOT illegal.

Must be clear, untinted and uncoloured, iii. Must have surfaces which are flat both on the side which faces the number plate and on the side which faces away from the vehicle, iv. Must have non-reflective characteristics and, v. Must have no unusual refractive characteristics. These requirements effectively prohibit number plate covers which have curved, domed, tinted or reflective surfaces from being fitted to a vehicle. Number plate covers which have lines or other markings on the surface which go over the number plate are also effectively prohibited. Regulation 222(2)(b) of the Road Safety (Vehicles) Regulations 1988 also requires that a number plate fitted to a vehicle must be clearly distinguishable and not be wholly or partially obscured

Looks flat and clear, no distortion and I can't see any lines on it.

You were able to take a clear picture of it weren't you? So...

Doesn't matter if I could take a clear photograph of the number plate or not, it is against their own regulations. I did read what was posted and it clearly says its "...effectively Prohibited." Open the photo again, use the zoom function and you can see lines across the cover. The RTA doesn't state that lines are acceptable if under a certain width. All in all there's 8 black painted lines across the numberplate that I can still make out even though the quality of the camera phone picture isn't very good. Imagine how much more obvious the lines are in person to grab my attention like that?

I still can't see why everyone jumps to defend the RTA when they make up allot of pointless (also allot of good) rules that ultimately cost us money in fines, even unintentional non dangerous defects.

A regulation is a regulation and I don't care who breaches it, no matter how small the infringement is. They say rules are there for a reason, are they not? Not all the rules are there for safety. A friend of mine got fined for having her Registration sticker on the tinted section of her front windshield, is this dangerous? Is she a hoon? No! but the regulation for sticking the sticker says it cannot be behind any tint, it has to be on naked glass on the windscreen or the left hand side of a fixed glass window. If she can get done for that, this Car should not have black lines across the numberplate.

19" mon @ 1280x1024 zoomed, unzoomed and over zoomed.

Could be your shit camera resolution but I still see NO lines.

But hey if you say they're there thats good enough.

Lol

Edited by madbung

It's def RTA. they have reserved all RTA and RTB plates.

I can read the plate... you could ready the plate... whats the problem? Sure if one of the letters was obscured it might be an issue.

I think you're touch the tip of a much larger ice berd. QUICK call ACA with your hot scoop!

It's def RTA. they have reserved all RTA and RTB plates.

I can read the plate... you could ready the plate... whats the problem? Sure if one of the letters was obscured it might be an issue.

I think you're touch the tip of a much larger ice berd. QUICK call ACA with your hot scoop!

Yet if the police officer didn't like the RTA driver, he would defect the car for an obscured license plate...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
×
×
  • Create New...