Jump to content
SAU Community

Recommended Posts

You dont download the latest top gear eps do you?

They tested it on there last show, some points i remember, it was extremely fast but handled like a bucket of water due to the eco friendly low resistance tyres and the extra 500kg worth of batteries it has to carry, both of the cars they had for testing either broke down or ran out of charge well before they should have, it costs 90,000 pounds, $220,000AU and it takes 16 hours to fully charge from empty.

While atm it has problems and is not feesable cars like this do pave the way for more practical, affordable and viable models in the future.

Edited by W0rp3D
Link to comment
https://www.sau.com.au/forums/topic/249541-electric-cars/#findComment-4327426
Share on other sites

sales pitches always do, give it 5-10yrs and they will have sorted most of the problems and it may be worth it, the battery technology out of this may well be taken on by other electric car manufacturers as that is the biggest problem with electric cars.

Link to comment
https://www.sau.com.au/forums/topic/249541-electric-cars/#findComment-4327457
Share on other sites

How many batteries again, 6000

Imagine this technology with hondas new hydrogen fuel cell; would work a treat! Anyone else shocked in awe over the new liquid hydrogen fuel cell? basically id expect in 10years to completely replace a-b transport whilst allowing ferrari, lamborghini and even us gtr drivers to keep be polically correct (not just theoretically) and enjoy a spirited petrol burn.

Link to comment
https://www.sau.com.au/forums/topic/249541-electric-cars/#findComment-4327786
Share on other sites

hydrogen is great in theory, but i just dont like the idea of driving an atom bomb. theres alot of safety stuff around saying there fine, but thats on the idea that you dont rupture the tank, they are 'safe' because there designed around the tank so you dont hurt it, but if you should somehow manage too, FKN BANG! thats my understanding of it....

i like the idea of leccy cars, but give it a few years. biggest problem with them is batteries. they're big, heavy, and expensive atm, but getting better

Link to comment
https://www.sau.com.au/forums/topic/249541-electric-cars/#findComment-4327818
Share on other sites

One of my favourite subjects, watch who killed the electric car and the short documentary in the extras.

It will explain the Californian zero emission policy..each manufacturer who wanted to sell cars in California had to have atleast 1 zero emissions vehicle in their range ect...It will also show how Texaco bought and buried battery technology to protected itself.

They did the same thing with trams (cable cars) over there, so the could sell more oil.

All GM EV1's were recalled and crushed.... So yeah they work, yes they can be mass produced economically and they also ripped the corvette of it's day a new one over the 1/4.

Backyard job drag

http://en.wikipedia.org/wiki/Who_Killed_the_Electric_Car%3F

http://www.evchargernews.com/CD-A/gm_ev1_w.../specs_main.htm specs, pricing ect

Limited range (60-70 miles) and reliability in the first EV-1s to ship, but better (110 - 160 miles) later. Research says the average driving distance of Americans in a day is 30 miles or less and that 90% of Americans could use electric cars in their daily commute. Towards the end of the film, an engineer explains that, as of the interview, lithium ion batteries, the same technology available in laptops, would have allowed the EV-1 to be upgraded to a range of 300 miles per charge.
Edited by madbung
Link to comment
https://www.sau.com.au/forums/topic/249541-electric-cars/#findComment-4328340
Share on other sites

hydrogen is great in theory, but i just dont like the idea of driving an atom bomb. theres alot of safety stuff around saying there fine, but thats on the idea that you dont rupture the tank, they are 'safe' because there designed around the tank so you dont hurt it, but if you should somehow manage too, FKN BANG! thats my understanding of it....

There's some interesting and very intensive research going into non pressurised methods of storing hydrogen right now, by dissolving it into another material. holds good promise.

Link to comment
https://www.sau.com.au/forums/topic/249541-electric-cars/#findComment-4328668
Share on other sites

sounds interesting, havent heard much about it. if non pressurized then it i'd be more approving of it, if anyone cares lol

The basic idea is that, (chemistry stuff inbound), when something dissolves in a solvent (eg, salt in water), the salt gets ripped into pieces and put in between the water molecules, but because of the way it does it, the water molecules that are carrying the salt don't actually take up any more volume.

Using this principal, you can get a substance, get the hydrogen to dissolve into it without any volume change, and just withdraw hydrogen as needed. I'm not exactly sure how far they've come in the "no pressure" line of things, or if its been more focused (or only useful) in increasing the energy density at high pressures.

Link to comment
https://www.sau.com.au/forums/topic/249541-electric-cars/#findComment-4329886
Share on other sites

  • 5 weeks later...
The basic idea is that, (chemistry stuff inbound), when something dissolves in a solvent (eg, salt in water), the salt gets ripped into pieces and put in between the water molecules, but because of the way it does it, the water molecules that are carrying the salt don't actually take up any more volume.

Using this principal, you can get a substance, get the hydrogen to dissolve into it without any volume change, and just withdraw hydrogen as needed. I'm not exactly sure how far they've come in the "no pressure" line of things, or if its been more focused (or only useful) in increasing the energy density at high pressures.

wow the depth of those sentences made my head hurt, but I kinda get it.....

lol

THANKS for all the opinions so far guys.

Link to comment
https://www.sau.com.au/forums/topic/249541-electric-cars/#findComment-4380418
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...