Jump to content
SAU Community

Rb20 Hks Highmount 2835 Kit (manifold, Lines, Dump & Front Etc Etc)

konect
 Share

Recommended Posts

konect Mentor

konect

Posted
Posted

Hello gents,

I had my manifold up for sale but have decided to sell the whole kit together and move to a smaller turbo. Details are:

Genuine HKS highmount manifold (RB20) - Purchased new a couple of years ago and in perfect condition.

Genuine HKS 35mm wastegate - Comes with screamer and the usual goodies

HKS 28/35 (Has been rebuilt with HKS core and high flowed) - This turbo has done less than 1000ks since undergoing a rebuild with a brand new HKS core, and was also highflowed by the rebuilder (even though it wasn't asked for >.<). The rebuild was due to cracking a piston in the old motor which destroyed the exhaust wheel. The turbo itself was operating at 100% prior to this.

Also included is:

Turbo lines

Intake pipe (without pod filter/AFM)

Custom dump and front pipe (has location to plumb gate back in if required)

Asking $2600 for all of the above. It's a perfect bolt on option with no stuffing around organising parts.

I can be contacted on 0412 033 449 for interested buyers.

PICS:

enginebay1.JPG

enginebay3.JPG

turbo1.JPG

turbo4.JPG

Cheers,

Ryan.

R33S2 Grand Master

R33S2

Posted
Posted

these are a good turbo, on my 33 im making 350hp at 17psi easily on a standard one. Boost comes on around 3200rpm.

konect Mentor

konect

Posted
  • Author
Posted
What power did it make, and who rebuilt the turbo? Curious to know what was done to hiflow it, bigger turbine, compressor ?

Hey Roy,

Since I've had it ive only made 190 on 0.8bar due to injector and AFM restrictions.

As for the high flow I'm not 100% sure as it was done by a shop when the motor went on the previous owner. Ill msg him and find out more details :down:

konect Mentor

konect

Posted
  • Author
Posted

Ok, previous owner doesn't know the specs of the core but it was done by Eastern Turbo Chargers in Bayswater.

I remember the story was that they highflowed it without his knowledge and then said thanks for the money. In any case, I would assume it has stock 28/35 specs and then you can be surprised later :D

konect Mentor

konect

Posted
  • Author
Posted
Do you know roughly when it would begin to hit boost & when it would peak on the rb20?

Cheers.

Currently came on ~4-4.5k but that was with exhaust leaks and low boost. Could probably get it to come on around 4k depending on boost level.

_x_FiReStOrM_x_ Community Regular

_x_FiReStOrM_x_

Posted
Posted
Currently came on ~4-4.5k but that was with exhaust leaks and low boost. Could probably get it to come on around 4k depending on boost level.

Cheers for that..

If you've still got this in the new year, i may get onto you about it. :banana:

konect Mentor

konect

Posted
  • Author
Posted
Cheers for that..

If you've still got this in the new year, i may get onto you about it. :blush:

No worries mate.

Need this gone ASAP so I can get my car on the road! Open to REASONABLE offers, don't low ball me or I will send a lovely reply :(

  • 2 years later...
Josh_TypeX Proficient

Josh_TypeX

Posted
Posted

I have this set up on my 32 and mine strts @ 4000rpm then it comes on hard @ 4500rpm and mine limits at 8000rpm running 14psi its awesome and i love it GL with the sale dude

Awesome first post...

Really do not understand how this happens :blink:

zakstarnz Newbie

zakstarnz

Posted
Posted

me either mate but its fun and i'm not gonna touch it...lol, it has got bigger injector, aftermarket coilpacks and the ecu has been remapped so maybe its because of this stuff but yeah like i said its fun and im chopping alot of other skylines in it...hehehe

Josh_TypeX Proficient

Josh_TypeX

Posted
Posted

me either mate but its fun and i'm not gonna touch it...lol, it has got bigger injector, aftermarket coilpacks and the ecu has been remapped so maybe its because of this stuff but yeah like i said its fun and im chopping alot of other skylines in it...hehehe

:facepalm:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Marek
      Hi everyone.

      By Marek · Posted

      Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • DanMac34
      R34 Speedo not working after manual swap

      By DanMac34 · Posted

      Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • joshuaho96
      Speed Sensor replacement

      By joshuaho96 · Posted

      Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • QB6SAGR
      Tein Circuit Master- rebuild worth it?

      By QB6SAGR · Posted

      Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...