Jump to content
SAU Community

R33 Antenna Always Up With New Headunit

Ryan12

By Ryan12,
in Car Audio & Electrical

 Share

Recommended Posts

Ryan12 Explorer

Ryan12

Posted
Posted

I just bought a new headunit for my r33, its a Pioneer 7050BT - Now when i was wiring it up it didnt appear to have an antenna wire of any sort, so its basically just wired up now when the ignition comes on the antenna pops up.

Is there anyway of wiring up this unit so that it only pops up when i turn on the radio rather than having it up all the time? My previous $80 headunit had this antenna feature but not this $500 unit.

If there is someway i can do it that would be great!

hypo32 Contributor

hypo32

Posted
Posted
I just bought a new headunit for my r33, its a Pioneer 7050BT - Now when i was wiring it up it didnt appear to have an antenna wire of any sort, so its basically just wired up now when the ignition comes on the antenna pops up.

Is there anyway of wiring up this unit so that it only pops up when i turn on the radio rather than having it up all the time? My previous $80 headunit had this antenna feature but not this $500 unit.

If there is someway i can do it that would be great!

Pioneer has a remote wire which is blue with a white stripe. This is what you use to trigger your antenna, it will pop your antenna up when ever the stereo is on.

Hope that helps..

Ryan12 Explorer

Ryan12

Posted
  • Author
Posted
Pioneer has a remote wire which is blue with a white stripe. This is what you use to trigger your antenna, it will pop your antenna up when ever the stereo is on.

Hope that helps..

Thanks mate

Will the antenna pop up every time the stereo is 'on'... Or only when radio is activated on the headunit?

W0rp3D Grand Master

W0rp3D

Posted
Posted

My 9850BT did not have an antenna wire, i had to hook it up to the amp remote which means its up when ever the head unit is on, my antenna broke recently so i put it down and cut the wire, i actually get better radio reception with the antenna down than with it up.

Also dont get too excited about the BT, the most mine would hold a connection for is 5mins, asked a mate that works at pioneer and they are blaming nokia for the problem, i have an old blue ant hands free and that does not have a problem but a $1000 head unit does..........

Beer Baron Grand Master

Beer Baron

Posted
Posted
Pioneer only does it when the radio is on.

really? I have a pioneer deck in my silvia. and it puts up the antena whenever the stereo is on, not just for the radio. it's annoying, I only want it up when the radio is on. maybe I can just wire in a switch or something.

Al Grand Master

Al

Posted
Posted
really? I have a pioneer deck in my silvia. and it puts up the antena whenever the stereo is on, not just for the radio. it's annoying, I only want it up when the radio is on. maybe I can just wire in a switch or something.

That's what i did with my Pioneer unit. Wired the antenna to the amp trigger wire and then put an override switch, so that i could manually put the antenna up if i am listening to the radio.

Ryan12 Explorer

Ryan12

Posted
  • Author
Posted
My 9850BT did not have an antenna wire, i had to hook it up to the amp remote which means its up when ever the head unit is on, my antenna broke recently so i put it down and cut the wire, i actually get better radio reception with the antenna down than with it up.

Also dont get too excited about the BT, the most mine would hold a connection for is 5mins, asked a mate that works at pioneer and they are blaming nokia for the problem, i have an old blue ant hands free and that does not have a problem but a $1000 head unit does..........

Ah yes my bluetooth did the exact same thing. There is a fix however. You download it from the pioneer website (http://www.pioneer.eu/eur/content/support/..._bt_update.html) and save it to your phone and bluetooth it across to the head unit and use the head unit to update its firmware. And now my BT works perfect.

And i think im going to have to make a switch or something, i can't see any way else around it.

Beer Baron Grand Master

Beer Baron

Posted
Posted
That's what i did with my Pioneer unit. Wired the antenna to the amp trigger wire and then put an override switch, so that i could manually put the antenna up if i am listening to the radio.

thanks Al, switch will be the go for me too. it's farken annoying having it up all the time. since whenever i'm in the thing a CD is playing means the arial is up 90% of the time. and if I turn the car off without turning off the stereo first it stays up. plus since the car is so long it looks like i'm driving a go kart with a little flag pole on it so big trucks wont run over me... :P

Al Grand Master

Al

Posted
Posted
thanks Al, switch will be the go for me too. it's farken annoying having it up all the time. since whenever i'm in the thing a CD is playing means the arial is up 90% of the time. and if I turn the car off without turning off the stereo first it stays up. plus since the car is so long it looks like i'm driving a go kart with a little flag pole on it so big trucks wont run over me... :)

If i turn the car off, while i am listening to the radio, my antenna goes down automatically. Don't know why yours stays up :)

  • 2 weeks later...
br3ndan Mentor

br3ndan

Posted
Posted

funny eh...alot of u guys not <500 dollar head units... and the antenna stays up..

mine is i think 120 dollar ken wood unit and it my antenna only goes up if the radio is turned on. And if i turn of the car suddenly with the radio on it will still bring down the antenna.

go kenwood!! haha :laugh:

  • 4 months later...
Al-R33 Enthusiast

Al-R33

Posted
Posted
My 9850BT did not have an antenna wire, i had to hook it up to the amp remote which means its up when ever the head unit is on, my antenna broke recently so i put it down and cut the wire, i actually get better radio reception with the antenna down than with it up.

Also dont get too excited about the BT, the most mine would hold a connection for is 5mins, asked a mate that works at pioneer and they are blaming nokia for the problem, i have an old blue ant hands free and that does not have a problem but a $1000 head unit does..........

Hey mate maybe you can help me with this... I have a 9800BT decided to give your soltuion a go... I cut the blue and white striped wire, then powered up the unit. The antenna did not go up, but I had no audio at all (no menu beeps, no radio or cd player audio). I connected the blue / white striped wire again which restored audio.

Perhaps I've got my blue/white wire wired up wrong?

Anyone else have these symptoms?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      God damnit. The only option I actually have in the software is the one that is screenshotted. I am glad that I at least got it right... for those two points. Would it actually change anything if I chose/used 80C and 120C as the two points instead? My brain wants to imagine the formula put into HPtuners would be the same equation, otherwise none of this makes sense to me, unless: 1) The formula you put into VCM Scanner/HPTuners is always linear 2) The two points/input pairs are only arbitrary to choose (as the documentation implies) IF the actual scaling of the sensor is linear. then 3) If the scaling is not linear, the two points you choose matter a great deal, because the formula will draw a line between those two points only.
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      Nah, that is hella wrong. If I do a simple linear between 150°C (0.407v) and 50°C (2.98v) I get the formula Temperature = -38.8651*voltage + 165.8181 It is perfectly correct at 50 and 150, but it is as much as 20° out in the region of 110°C, because the actual data is significantly non-linear there. It is no more than 4° out down at the lowest temperatures, but is is seriously shit almost everywhere. I cannot believe that the instruction is to do a 2 point linear fit. I would say the method I used previously would have to be better.
    • GTSBoy
      DeAgostini 1/8 scale BNR32 Nissan Skyline GT-R Nismo

      By GTSBoy · Posted

      That's hilariously putrid!
    • GTSBoy
      R33 Fuel Pump & Brakes after alarm swap

      By GTSBoy · Posted

      When I said "wiring diagram", I meant the car's wiring diagram. You need to understand how and when 12V appears on certain wires/terminals, when 0V is allowed to appear on certain wires/terminals (which is the difference between supply side switching, and earth side switching), for the way that the car is supposed to work without the immobiliser. Then you start looking for those voltages in the appropriate places at the appropriate times (ie, relay terminals, ECU terminals, fuel pump terminals, at different ignition switch positions, and at times such as "immediately after switching to ON" and "say, 5-10s after switching to ON". You will find that you are not getting what you need when and where you need it, and because you understand what you need and when, from working through the wiring diagram, you can then likely work out why you're not getting it. And that will lead you to the mess that has been made of the associated wires around the immobiliser. But seriously, there is no way that we will be able to find or lead you to the fault from here. You will have to do it at the car, because it will be something f**ked up, and there are a near infinite number of ways for it to be f**ked up. The wiring diagram will give you wire colours and pin numbers and so you can do continuity testing and voltage/time probing and start to work out what is right and what is wrong. I can only close my eyes and imagine a rat's nest of wiring under the dash. You can actually see and touch it.
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      So I found this: https://www.efihardware.com/temperature-sensor-voltage-calculator I didn't know what the pullup resistor is. So I thought if I used my table of known values I could estimate it by putting a value into the pullup resistor, and this should line up with the voltages I had measured. Eventually I got this table out of it by using 210ohms as the pullup resistor. 180C 0.232V - Predicted 175C 0.254V - Predicted 170C 0.278V - Predicted 165C 0.305V - Predicted 160C 0.336V - Predicted 155C 0.369V - Predicted 150C 0.407V - Predicted 145C 0.448V - Predicted 140C 0.494V - Predicted 135C 0.545V - Predicted 130C 0.603V - Predicted 125C 0.668V - Predicted 120C 0.740V - Predicted 115C 0.817V - Predicted 110C 0.914V - Predicted 105C 1.023V - Predicted 100C 1.15V 90C 1.42V - Predicted 85C 1.59V 80C 1.74V 75C 1.94V 70C 2.10V 65C 2.33V 60C 2.56V 58C 2.68V 57C 2.70V 56C 2.74V 55C 2.78V 54C 2.80V 50C 2.98V 49C 3.06V 47C 3.18V 45C 3.23V 43C 3.36V 40C 3.51V 37C 3.67V 35C 3.75V 30C 4.00V As before, the formula in HPTuners is here: https://www.hptuners.com/documentation/files/VCM-Scanner/Content/vcm_scanner/defining_a_transform.htm?Highlight=defining a transform Specifically: In my case I used 50C and 150C, given the sensor is supposedly for that. Input 1 = 2.98V Output 1 = 50C Input 2 = 0.407V Output 2 = 150C (0.407-2.98) / (150-50) -2.573/100 = -0.02573 2.98/-0.02573 + 47.045 = 50 So the corresponding formula should be: (Input / -0.02573) + 47.045 = Output.   If someone can confirm my math it'd be great. Supposedly you can pick any two pairs of the data to make this formula.
×
×
  • Create New...