Jump to content
SAU Community

Car Doesnt Turn Off!

.::Matt

By .::Matt,
in Engines & Forced Induction

 Share

Recommended Posts

joeyjoejoejuniorshabadoo Grand Master

joeyjoejoejuniorshabadoo

Posted
Posted

sure it doesn'thave one?

try leaving the handbrake off and see if that trips it...

my guess is that your alarm has a timer inbuilt and you have inadvertantly activated it with a key sequence

Jdfnq Proficient

Jdfnq

Posted
Posted
there is still a possibility that there is a turbo timer hidden somewhere.

Mine had a harness hidden under the dash.

+1

mine is hidden under the dash as well and it took asking on here to figure it out....

It was neatly tucked up where it was next to impossible to find (which is a very good thing I might add)

dan_the_man Grand Master

dan_the_man

Posted
Posted
Hey guys,

I have a 1996 R33 and it has a little problem it doesnt turn of when you remove the key... so you turn the key of a take the key out and it will keep running for about 30 secs..

Any help would be great

cheers Matt

ur turbos. they are being timed

skybarge Community Regular

skybarge

Posted
Posted

yeah, I'm with either turbo timer,

or if your's was converted to manual, check the auto switch, I remember mine broke, meaning I couldn't switch it on or off, had to bypass it with a switch, it's in the ignition column I think?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By GTSBoy · Posted

      I hadn't thought about the variable power steering assist. Presumably, it will always be the same level of assist as you get in an S14. The R32/3/4 are either helliishly heavy (at low speeds) if the solenoid is not powered at all, or hellishly too light (at high speed) if it is powered all the time. I presume that it is PWM controlled on those cars. I hadn't thought about the S cars not having variable assist. ugh. What crappy plebby cars they must be!  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Hmm yeah that is a good point. It looks like it'll just bolt in with no real issue besides maybe the bushings being different. My other concern was that 2 pin plug that I assume is used in some way to control the rack solenoid depending on the speed signal from the ecu. The DMAX rack doesn't even have that plug though so, don't think it'll matter. Might just order the rack and see how it goes. Will update this when I figure something out
    • GTSBoy
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By GTSBoy · Posted

      I'd say it's a fair bet that the feed and return fluid lines will be in different enough spots that you would need to come up with a way to cut the originals short and adapt with new hard line adaption or braided teflon hoses or somesuch. But really, you have the car, you have the photos of the DMAX rack - you should be able to go out there and see for yourself whether they're in the same or different spots.
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      I've been doing some looking around and honestly was just considering throwing a new rack at it. I saw that the dmax silvia rack bolts up into the 33 with the silvia bushings but not sure if the high pressure lines will sit in the correct spot. I believe other version of the 33 rack are the same/similar to the racks that can be opened up without as much fuss so I assume the dmax rack would fit but any ideas?
    • GTSBoy
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By GTSBoy · Posted

      I've never played with one, but I would expect that you are correct. That slot looks like it is intended to be used to unscrew the end, and the flats on the body would be better than grabbing it around the round bit with a pipe wrench. So, yeah, probably unscrews. You'll probably have to make a tool to drive in that slot.
×
×
  • Create New...