Jump to content
SAU Community

Recommended Posts

i have a track day coming up soon and i have 18x10s front and back on a r33 gtst now what would be the go with stretched tyres ill be only doing 4 to 5 laps at a time one which is a warm up and one which is a cool down (don't ask) so two laps at full pace,what do you guys think about these sizes.

F 245/40

R 245/40

F 245/35

R 245/35

F 255/35

R 255/35

F 255/35

R 265/35

as for brand any ideas they must be UTQG rating higher than 100 and um (wtfit)

thanks.

Link to comment
https://www.sau.com.au/forums/topic/251708-stretched-tyres-for-track-days/
Share on other sites

depends on the sidewall, but those sizes u put up are not much of a stretch, well within safe.

with 309kw (going by ur sig) id be going for a staggered sizes, give a bit more meat on the rear to help get the power down.

for a 18x10 id be going 245/40 or 255/40 front, 265/35 or 275/35 rear. depends on the availability and price etc

depends on the sidewall, but those sizes u put up are not much of a stretch, well within safe.

with 309kw (going by ur sig) id be going for a staggered sizes, give a bit more meat on the rear to help get the power down.

for a 18x10 id be going 245/40 or 255/40 front, 265/35 or 275/35 rear. depends on the availability and price etc

my sponsor is buying the tread,and as for 309kw i hope to be up to 330kw by that day with new products.

one quick thing i can't remember why 40 in front and 35 in back i did that with my 17 45f and 40 back but i can't think why i did it...lol

i was thinking 35 in the front to make sure i clear everything under load in corners.

the 35 at the rear is because its wider, since the profile is a aspect ratio, the 35 on the 265 will have a similar size sidewall height to a 245 with a 40 profile.

what about if i go for more clearance in the front with 255/35 and what 266/35 or 275/35 or 30

thanks nisskid

no body knows if stretched tires are bad or good for track days,sure some smart person would know something factual.

the sizes u posted arent stretched, well not much at least, they will be fine, albeit not as grippy as something wider. not exactly sure what response ur after? wider will have more traction yes.

no body knows if stretched tires are bad or good for track days,sure some smart person would know something factual.

Tyres are designed/engineered to fit a specific rim/rims. If you fit tyres to a rim that is outside that specific range you can:

* Reduce grip through contact patch distortion

* Risk either - Beads unseating from bead seat

* Damaging Bead and or Sidewall because it is being distorted and was designed to be used in this way.

My advice don't do it.

Tyres are designed/engineered to fit a specific rim/rims. If you fit tyres to a rim that is outside that specific range you can:

* Reduce grip through contact patch distortion

* Risk either - Beads unseating from bead seat

* Damaging Bead and or Sidewall because it is being distorted and was designed to be used in this way.

My advice don't do it.

lol at those 2 points. how many cases have u heard of that happening? its just tyre shops/manufacturers saving their arse. the biggest issue ull have with stretched tyres (im talking properly stretched tyres, like <205's on 10" rims) the tyre can roll off the bead.

lol at those 2 points. how many cases have u heard of that happening? its just tyre shops/manufacturers saving their arse. the biggest issue ull have with stretched tyres (im talking properly stretched tyres, like <205's on 10" rims) the tyre can roll off the bead.

Lol at everybodys relaxed attitudes towards "strecthing" tyres. I see damage from missuse and misapplication with tyres everyday - everyone is an expert. What would the engineers and the independent tyre & rim standard engineer/members know. The good old "she'll be right attitude"

While your at it why not leave the wheel nuts undone.

Edited by Potenza

any documented cases?

because ive never heard of any, i'm sure they are around, but the fact i havnt seen one tells me they arent very common.

a 245 on a 10" is only one size under the reccomended, do u really think tyre manufacturers would reccomend a 255 on a 10" rim if they knew the size under could potentially cause a failure, resulting is pretty massive compensation?

they keep a massive safety margin because they can, theres no need to reccomend a 245 on a 10", it doesnt make any significant impact on sales, but it gives them a massive cushion for any complaints.

I ran 225 40 r 17's on 9" rims on my GTR around barbagallo on my first outing there, had no issues. Stretching the tire gives you a bit more response as there is less sidewall flex but you could have better grip with a wider tire...

Tires were Bridgestone potenza's re050 was bouncing the ripple strips all day with them :D

how many V8 supercars do you see with fully sick stretched rear tyres onto 11ty billion inch width rear rims?

how many rally cars do you see with stretched tyres?

how many F1 cars do you see with stretched tyres?

If it was any performance benefit these boys would be all over it before you'd even heard of it.

if we're talking about performance, then the right size spec tyre (near vertical sidewalls, if a little leant over toward to tread) will perform the best.

you don't see lambos, fezzas, porkers coming from factory with a 225 on a 10 inch rim, for a reason.

yep.

We run 245's on our 9.5" rims and 265's on our 10.5" rims for best results. So on a 10" maybe a 255 would be the way to go but it's generally not a common size in which case I'd tend towards the 265's before the 245's.

yep.

We run 245's on our 9.5" rims and 265's on our 10.5" rims for best results. So on a 10" maybe a 255 would be the way to go but it's generally not a common size in which case I'd tend towards the 265's before the 245's.

what size 255/35 or 255/40.

thanks.

For a baseline to work within ask the tyre vendor, or hopefully just check their website. They publish what rim sizes are suitable for which tyre. Even if the sizes are identical, different tyre models can sometimes accept slightly different rim widths.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey everyone, I recently bought myself a 2001 Nissan Stegea M35, and I've had a few issues that I had to fix, my car would start intermittently and I had a bad rocker cover leak, after a couple days of looking I finally found a part number that interchanges with the OEM starter as the OEM starters at $1300 and I can't afford that, this starter was only $270 and I replaced the start and still had the same issues, I posted a video asking for help online and it went very well, some guy said it was probably a bad ignition switch so I took my dash apart and turns out my ignition switch was half screwed in and was loose, once it was tightened it fired right up, I found a local place called "Boost factory" and they sold me a part of OEM Nissan rocker covers, they were $600 which was a shocker but I couldn't find them anywhere else, so I installed them and fixed my oil leak as the old rocker cover was cracked and warped, I now need to replace my boost air inlet hoses as they have some cracks.
    • I am being real ocd and do not want to make amy mistakes so appreciate all help provided. I am overly cautious so asking for opinion even if i know the answer   few questions,   1.re tensioner, should spring be greased lightly?    2.tensioner has two washers , one pressure washer and other has recessed/ seat. I am going to put the recessed one facing tensioner where edges are cut out and pressure washer on top   3. my car has custom triger kit sold few years ago by guy who initially built the engine. I moved the crank gear and it moved in and out easy, only way to remove belt is to slide the crankshaft gear forward which I did. I have seen these being very tough to move , anything to do with my woodruff key?   it has a crank sensor shown in purple which I assume reads from the 12 teeth position mounted to the crankcase gear   4. timing belt doesn’t have arrow stating front or back just a arrow which I think is direction of rotation . Do you agree?   5.i figured out why my crankcase cover was worn as there was no washer installed over the crankcase cover before the harmonic balancer was put in place. It is missing, anyone knows the part number? It looks like this https://justjap.com/products/genuine-nissan-crankshaft-timing-gear-rear-plate-washer-nissan-s13-ca18-a31-r32-rb20-r33-r34-c33-c34-c35-rb25?currency=USD   https://tinypic.host/image/IMG-4535.382Zy2 https://tinypic.host/image/IMG-4537.382dSz https://tinypic.host/image/IMG-4534.382q4U  
    • CTIS (Central Tire Inflation System) has existed since the 80's. I'm looking into buying a Hummer H1 and they generally included it. 
    • My idle is set at 950rpm though - Moving the timing around 20 degrees is not really what I'd call a calm idle. That said... neither is chop, by definition. The LS ECU likes to adjust timing to hold idle as opposed to air. It'd work, but generally speaking there'd be a discrepancy in the base idle and the IACV would want to move the timing around anyway to maintain said idle. I think I'm just going to keep the timing steady anyway. Preserve my engine mounts.  My aircon is now officially regassed. As the guy was reversing I noticed my reverse lights do not operate, along with my reverse cam. This is a bit distressing, because 100% of guides talk about which wire to connect to backup cams as "the goes with the [other color] wire". Often when doing conversions. Unfortunately the R34 colour wires aren't documented Unfortunately I had a T56 Magnum gearbox with it's reverse switch, which also isn't documented. Unfortunately there's definitely not documentation for people with both of these in the one car. Unfortunately I forgot. After many hours of this, I have a reverse cam and reverse lights again. The wire going through the trans tunnel to the reverse switch had broken. Upon inspection, it looks like this one wire had about 7 spade terminals and extensions in it.. for reasons I cannot possibly comprehend. I also spent the 750 hours required to clean up the wiring behind my head unit which now looks like this: This is a monumental improvement relative to what used to be there WRT triple gauges, head unit, traction control, wideband controller, and whatever the f**k OEM stuff still exists there in various states of connectivity/needed. Next step is to check in at the Exhaust shop to see/confirm how much clearance I have, to decide what mid mufflers or 'resonators' (which are just straight through, narrower mufflers) I can add and hopefully cut out a lot of exhaust leaks, pinhole, v-band or otherwise. But first step will be to 'take a look' before the next step.
    • Fark the AFM card and Nistune, Haltech Nexus S3, DBW, cruise control, flex fuel, dis dat.  
×
×
  • Create New...