Jump to content
SAU Community

Recommended Posts

Hey guys

My first post here.

Sorry if im in the wrong section.

I live in vic and am looking at spending around 8to 10g on a skyline. I know very little about them. Im looking mainly for power here.

I currently drive an 89 honda prelude so have been going without some solid power for a long time.

I would be looking for something that is turbo and that with little but the right mods can produce some reasonable numbers.

For the 8 to 10k budget what specific models would you reccomend??

Link to comment
https://www.sau.com.au/forums/topic/251721-what-to-get/
Share on other sites

r32 gtst or r33 gtst. would be lucky to find a good r33 gtst for around that money but there have been some bargains around that much before.

r32's are getting a little older but i love them more then the 33.

if yo uare looking only for power then go the r33 for sure.

Link to comment
https://www.sau.com.au/forums/topic/251721-what-to-get/#findComment-4356898
Share on other sites

hey bro

welcome the forums

i picked my r33 gtst up for 8500 and it was a gem, had a couple probs here and there but nothing to major....very decent power too man especially my self coming from a honda just like u theres a big difference...you should find a nice r33 gtst around that budget but get it checked out by someone who knows em pretty well cuz they are a high maintenace car so u wana make sure u get one that has been looked after

im on the contrary to jakez88....i love the 33 over the 32 :) lol

let us know what you get

Link to comment
https://www.sau.com.au/forums/topic/251721-what-to-get/#findComment-4356907
Share on other sites

save another 10k and buy an R32 GTR!

but you should be able to get a cheap R33 to suit your budget..

welcome to the forums

and then save ANOTHER 10k when it blows a 26.

32 gtst or perhaps a 33 gtst is your best bet.

Link to comment
https://www.sau.com.au/forums/topic/251721-what-to-get/#findComment-4356937
Share on other sites

Id really have to stick to the 10k budget.

Is there any specific year for the r33 gst-t that I should be looking for? And of course it would have to be manual.

if only u were asking this bout 2 weeks ago i was seling my 33 with rwc manual, sunroof fmic, stereo and reg. damn

Link to comment
https://www.sau.com.au/forums/topic/251721-what-to-get/#findComment-4357177
Share on other sites

93-95 is what your looking for which is series 1-1.5. but i mean if you can bargain down a series 2 to about that price get one. iremember when i was buying my r32 and i was also interested in getting a r33, a white series 2 with 83,000kms went for $7500. i was spewing as when i called the guy that i would take it he just told me he sold it. some mature guys from bendigo.

keep a look out for the bargains because they tend to happen more now since skylines are getting harder to sell.

Link to comment
https://www.sau.com.au/forums/topic/251721-what-to-get/#findComment-4357222
Share on other sites

pretty sure 33 series 2 is from 96-98, and prices for lines are getting cheaper by the month so you never know, allthough i would suggest getting a well sorted series 1 or even a 32 over a cheap n nasty 33series2. theres a sticky for the model differences- its worth a look to see what you get for the extra dosh.

drive different models to see how you like them, best of luck let us know how you go :D

Link to comment
https://www.sau.com.au/forums/topic/251721-what-to-get/#findComment-4357378
Share on other sites

Thanks guys

Il keep an eye out for a 96 r33 gst-t series 2.

What are my chances of finding one stock? Or mostly stock with just say an exhaust setup.

I want to plan my own mods properly and that will have my car running hopefully 250 rwkw safely and consistantly.

Im hoping to try and have the car as legal as i can. just to save all the hassles of defects and the rest.

I think coming from the outside into the skyline world most people would say the police are very keen to pull over anyone driving a skyline.

just some thoughts i had.

cheers

Link to comment
https://www.sau.com.au/forums/topic/251721-what-to-get/#findComment-4358522
Share on other sites

Thanks guys

Il keep an eye out for a 96 r33 gst-t series 2.

What are my chances of finding one stock? Or mostly stock with just say an exhaust setup.

I want to plan my own mods properly and that will have my car running hopefully 250 rwkw safely and consistantly.

Im hoping to try and have the car as legal as i can. just to save all the hassles of defects and the rest.

I think coming from the outside into the skyline world most people would say the police are very keen to pull over anyone driving a skyline.

just some thoughts i had.

cheers

Dumbest thing these days to to buy stock as to week later u will want to spent another 5-10k only stuff - 100% guaranteed. So save your self hassle and money and go find one that alreayd has good mods as they wont be selling for much more - then enjoy the line...Just becuase you didnt do the mods doesnt mean they havnt been done properly or its reliable. Check out their workshop for a background.

stock power = the suckness.

Link to comment
https://www.sau.com.au/forums/topic/251721-what-to-get/#findComment-4359214
Share on other sites

Dumbest thing these days to to buy stock as to week later u will want to spent another 5-10k only stuff - 100% guaranteed. So save your self hassle and money and go find one that alreayd has good mods as they wont be selling for much more - then enjoy the line...Just becuase you didnt do the mods doesnt mean they havnt been done properly or its reliable. Check out their workshop for a background.

stock power = the suckness.

agreed.

if you can get a lighlty modded skyline with a RWC you all in the clear.

but again look out for dodgey's. if you know a mech get him to do a once over,

there are little tricks people do to make a fast sale of a dead car that last's for about 2weeks , like some one recently had the joys with a $13k r32 GTR that had the rb26 oil attack 1week later and now dead in a workshop

good luck non the less, plenty of info on the forums here and lots of help and second hands parts also

Link to comment
https://www.sau.com.au/forums/topic/251721-what-to-get/#findComment-4359601
Share on other sites

agreed.

if you can get a lighlty modded skyline with a RWC you all in the clear.

but again look out for dodgey's. if you know a mech get him to do a once over,

there are little tricks people do to make a fast sale of a dead car that last's for about 2weeks , like some one recently had the joys with a $13k r32 GTR that had the rb26 oil attack 1week later and now dead in a workshop

good luck non the less, plenty of info on the forums here and lots of help and second hands parts also

cheers guys. this site has been great.

Say i find something with the stock turbo exhaust system and say boost controller which seems fairly common what kind of work would need to be done to achieve a figure of consistant 250rwkw and with an estimated rough cost to do this

Link to comment
https://www.sau.com.au/forums/topic/251721-what-to-get/#findComment-4369259
Share on other sites

New turbo $1000 - $2000

Bigger exhaust (dump, front, highflow cat, cat back) $500 - $1500

Pod filter or aftermarket air box $50 - $150

Bigger injectors $400 - $800

Z32 AFM $200 - $300

FMIC $300 - $1000

Aftermarket ECU (Power fc, E-manage etc) $300 - $1300

Get it tuned $400 - $800

After all this you would want to upgrade the suspension, wheels/tyres, brakes etc

Link to comment
https://www.sau.com.au/forums/topic/251721-what-to-get/#findComment-4369361
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • When sanding across a convex panel, you need to sand, as much as possible, at right angles to the curve. If the panel is compound convex curved (ie curved in both directions) then you are SOL and have to use "craftsmanship" to get it right.
    • Today in Skyline arts and crafts!! I’ve made some progress.    had to put extra notes in there so I don’t stuff it up 😂
    • This sounds like me. And then why I leave shit that I had previously hobbled together broken. Lately I've changed strategies to "If I don't want to justify the money on decent stuff, I'm not going to justify hobbling it together". I'm still for DIY, but DIY it properly is more my thing. However, I am terrible on not setting up backups still... Which reminds me, I need to go backup some of my work VM machines... Oh, it's also why I've become a lover of building things into Docker Containers... Then I just need a machine that can run docker, and bam, that specific system is up and running, on the specific versions of everything I need for it to run (In the event a change in required software version breaks something else). Also, these days, my steep learning curves are spent with work related stuff, and on very varied projects, that my want to do other random projects like build a dashboard for my own car has dwindled away to "I just want the car running", which is my current PITA, as I'm getting the Landcruiser usable again, and it has just been non-stop the past 6 to 8 weeks of buying parts, and working on it. Oh, and tools that are meant to be fit for purpose... And they break, because 25 year old 4WD decides it's stronger... But by the time I have it ready to roll back out the drive way, nearly all the stuff in it will have been touched and serviced, so the damn thing better give me NO FREAKING ISSUES, for at least the next 50,000KMs! Just redone whole front of the motor, and resealed the up top stuff, replaced a bunch of things getting perished, new timing belt done, water pump, lower timing cover (Toyota diesel engine runs timing GEARS for the bottom half the motor, and a timing belt from halfway up to the top), new harmonic balancer, fix up the alternator, new thermostat, full swivel hub rebuild, new bearings and seals front and back, steering box rebuild, new battery, and today, it turns out a rear shock has let go, so four new shocks are about to go on order, and that will leave me with after the next run of work, to see if I need to order just a brake caliper re-seal, or if I'll need new pistons in them too. Oh, and I'll finish welding in the new floor sheet metal shortly too. Presently I just want it finished already... But once all the above is done, I still need to fully service diffs, gearbox, transfer, and motor. Then flush and bleed the clutch, and flush and bleed the brakes. But enough about our waffle, back to Duncan's heat problems... I think for Duncan he just gets a thermoswitch, and a manual switch to run some water misters. Thermo so it's only on above certain temps, and the manual switch so it can be turned off even if it is above certain temperatures. IE, switch on for "I'm now on track", then it doesn't need any "smart" computers that might try and do things wrong. And switch the thing off completely on the cool down lap, so when he stops in pits, there's not even a possibility of it dripping any water out to get him in trouble.
    • So I ran into the same problem. I got stuck in the cycle of again of putting putty sanding it, putting putty sanding it, because of a low spot. And notice my block is not completely flat with the panel, even though it's a long block. My panel is slightly curved. Is this an issue? Do I need something that matches the door perfectly, or no?    I do have the smaller flexible block that covers the width of the repair just not the length, I was experimenting with it again to but seems to be the same issue
×
×
  • Create New...