Jump to content
SAU Community

Recommended Posts

http://www.anfittingsdirect.com/index.php?...1b11a2817fc507d

Whoever's fuel system that is in the picture- You have to be very carefull putting hose clamps on pushlock hose/fittings.... it will cut the inside if the hose and lift the hose off the barbs either side of the clamp.... it's more likely to leak putting the hose clamp on!

It's not cheap, but aeroquip starlight hose and fittings have been designed for all sorts of ethanol/race fuels... awsome stuff!

http://www.anfittingsdirect.com/index.php?...1b11a2817fc507d

Cheers

Justin

The silly old man did the clamps on the hose thing. I have already removed them and will shove them up his ass at the earlieast opportunity.

just what i was gonna say, bosch do them @ 12v not 14

also you other blokes like marko, you sure you are not getting confused with 040 & 044?

sometimes people do that :P

"Each Bosch 044 inline fuel pump provides 300LPH of flow and operate at 72.5 PSI"

...straight off this website: http://www.boschfuelpumps.com/

"Each Bosch 044 inline fuel pump provides 300LPH of flow and operate at 72.5 PSI"

...straight off this website: http://www.boschfuelpumps.com/

thats a company website trying to sell pumps... they have written that information themselves, and it contradicts the numbers provided by bosch on their website (www.bosch.com.au)

The silly old man did the clamps on the hose thing. I have already removed them and will shove them up his ass at the earlieast opportunity.

They look stainless..... they're gonna hurt- sharp edges and all! ha ha ha

http://www.bosch.com.au/content/language1/...s/fuelpumps.pdf

On the bosch website.....but yes as stated above at 12v

I would expect around 220 (maaaaaybe 240Lph) at 14V

Sounds about right, assuming that flow/voltage are fairly directly proportional you are looking at 245l/hr at 5bar.

I would say most street cars are running about 1.5bar plus 3bar base so would push flow up to 260l/hr... So enough to feed 720cc injectors :P

thats a company website trying to sell pumps... they have written that information themselves, and it contradicts the numbers provided by bosch on their website (www.bosch.com.au)

u are right just had a look - shouldnt always believe what i read :P

Even if it were true marko i would still take the pierburg on noise factor alone. You can hardly hear these things, unlike the swarm of hornets unleashed every time you turn the bosch on.

i luv that sound, like having squealing race brakes or BIG cams :P

My 044 mounted in the tank only ever makes an audible sound when priming...otherwise you can hardly hear it while the car's running

your ecu will have the factory fuel pump controler enabled, so below ~1500rpm the fuel pump voltage/current drops to keep noise down, turn it off and you will be able to hear it again.

Even if it were true marko i would still take the pierburg on noise factor alone. You can hardly hear these things, unlike the swarm of hornets unleashed every time you turn the bosch on.

You're starting to sound like an old man

"Turn that down you young hooligans"

lol

My 044 mounted in the tank only ever makes an audible sound when priming...otherwise you can hardly hear it while the car's running

Thats right, when i had one 044 intank you could hear it but it wasnt as bad as people make it out to be...

...the 2 hanging under the car are a different story

You're starting to sound like an old man

"Turn that down you young hooligans"

lol

Thats right, when i had one 044 intank you could hear it but it wasnt as bad as people make it out to be...

...the 2 hanging under the car are a different story

Sound like one? He frickin is one!

Oh and I forgot to mention the Pierburg pumps are a pull/push pump so no prime pump required if you don't need a surge tank

Sound like one? He frickin is one!

Oh and I forgot to mention the Pierburg pumps are a pull/push pump so no prime pump required if you don't need a surge tank

Ah internet sarcasm strikes again lol

The old man stole my seat at superlap and i didnt have the guts to tell off a pensioner :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
    • Also playing with fire if they start to flow more air down low than what the stock twins can. It's not even up top you need to worry, it can be at 3000rpm and part throttle and it's getting way more flow than it should.
    • Any G40/1000 or G40/1250 results out there?  
    • You still want a proper tune on the stock ECU though. Stock tune + stock ECU with GT-SS/-9s is probably playing with fire if you're running more than stock airflow/power.
×
×
  • Create New...