Jump to content
SAU Community

Recommended Posts

We only used two sets, both times the car wouldn't start. We had to run them through the injector bath twice before they came up good.

We had the same with a Bosch injector once also. That's why we clean all injectors before use now. They aren't bad injectors. Not a single injector on this planet can be cleaned and flowed, then sit for a month and still have its company guarantee its perfection.

We've never had lean out issues with the pencil type 1600's.

Any time we've had an injector issue with a Bosch injector (ID's included) they were fixed with a clean so we never had to return any.

Yep that's correct ID had a issue with a certin type of after flow matching lube that caused the batch problems. I know FIC and ID pulled the 1600's from there lineup cause of the leaning issue..

Dan, where did you get the ID"s from? plenty of people sell bog standard bosch ones as ID's

The ID's were purchased directly from Injector dynamics both times by my customers. They came with the ID spec and flow sheet also.

There are also no difference between the ID's and the Bosch injectors except for the fact ID apparently dead time test their injectors and Bosch don't.

Bosch are still flow matched and flow the same.

I don't see the point in paying extra for the same product. We have seen the spray pattern on both and cannot tell the difference

Just gasket on with nothing ye? Im sorry i know its a stupid question but its my first time

Yep, the gasket provided is all you need.

And I disagree with Marko, there are stupid questions....but yours was not one of them. I just couldn't resist the temptation to be idiotic

There are stupid Q's OK but it would even stupider to put that engine together then realise wtf I should have asked about that sealer (definitely not taking a dig at u daniel after helping me with that nugget white gtr u inspected for me at no fee last year :))

Anyone in here know of a place to get the push in fittings for RB26 cam covers with a 90 degree outlet?

NOT a straight then add a Speedflow 90 degree bend - that wont fit. Needs to be the same fitting that goes into the cam cover that's got the bend in it

I just want to know a couple things from you 400kw guys i wana know,

What sumps you guys are using if in melb where u got it from size cost and if from out of melb cost of freight

Can the std intake piping and cooler support 400kw ? Coz i wana try keep it for now cant afford it,

Std exhaust manifold port matched to gasket will it flow 400?

Cheers

Can the std intake piping and cooler support 400kw ? Coz i wana try keep it for now cant afford it,

Std exhaust manifold port matched to gasket will it flow 400?

Cheers

Standard intake piping as in the pipes from airbox to turbo's and the 'twin turbo pipe'? If so then yes

Exhaust manifolds are a yes also.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
×
×
  • Create New...