Jump to content
SAU Community

Recommended Posts

My old gtr I ran an 11.1 @ 129mph with only 320awkw.

I lot of ppl find it hard to believe but I also ran over the finish line in 3rd gear hitting the limiter for what felt like 1 second...that was capable of a high 10 run with such little power!

Wow, 129mph in third, what gearbox is that ?

How thick is your gasket?

What's your deck height? That seems damn low!

1.2. Unknown deck height. Used head. 8.6 should be my numbers but calculations showed otherwise I guess. I don't know. My goal was 8.7:1. Builder might have worked the deck?

stock box but with the MT's having high walls, the ratio somewhat changed

ran a nismo diff which i'd assume also ran stock ratios

I run the Toyo TQs which are the same size and am nearly at the top of 4th for 123 mph, what is your rev limit ? I shift between 6500-7 then hold 4th across the line at over 7000

Not sure of size Paul but they looked like marshmallows.

I think revlimit was 8.5krpm, no mercy. Side step clutch off the limiter and I think got down to 1.5 60footer

Fark yeah. I want those tyres!

Dial up revs, say a prayer, grit teeth, come off clutch and hope nothing breaks!

Thats my problem, [email protected] with a 2.0 60 footer. I think the best i have seen 60 wise was a high 1.7 lol

I actually need more power off the line as 7500rpm bogs so hopefully the 2 step will sort it out. I could rev limit it but i dont like the sound of 9000rpm.

I am guessing the tyres Marko is using would be the 255/50/16's i think they are, it whats most use on Nissan's. Its what i use.

Thats my problem, [email protected]

I actually need more power off the line as 7500rpm bogs so hopefully the 2 step will sort it out. I could rev limit it but i dont like the sound of 9000rpm.

.

Bogs down off the line, u need rb30, that will fix it.

I launch at 4200rpm and still struggle with wheel spin.

11.006, that's heart breaking, sooooo close to a ten, lol

Yeah I run 255/50/16 Toyos TQs

Some may think so, i was glad it went that close. Gives me more time to get the 60 down and get booted properly ;)

Next time out, hopefully next Friday's Full Throttle Friday, i will be able to get the 60 foot down to a 1.6/1.5 and get the car booted for not only running deep into the 10's but also for running 140mph plus. I am only 3mph away from needing a parachute as well ;)

Bogs down off the line, u need rb30, that will fix it.

I launch at 4200rpm and still struggle with wheel spin.

RB26 sounds better hehe ;)

Couldnt go a dirty 30 anyway as its in an S14 and it hits the bonnet as it is

Ido09s:- what power to run 136mph, and what car?

used to make about 430rwkw on the Unigroup dyno at 25psi, thats when it ran 137mph.

Its got 485rwkw now thanks to a PT 6766 so who knows what it will run now

Its in an S14 and i run ET STreets

Edited by ido09s

1450kgs with me in it on the Sydney Dragway weighbridge. So yeah, its probably 100kgs lighter than most GTR's. Its only ever raced in complete street trim, full interior, stereo etc The only reason the sub box is coming out next time is because it tore itself loose last time on launch and it wont stay where its meant to now.

Some may think so, i was glad it went that close. Gives me more time to get the 60 down and get booted properly ;)

Next time out, hopefully next Friday's Full Throttle Friday, i will be able to get the 60 foot down to a 1.6/1.5 and get the car booted for not only running deep into the 10's but also for running 140mph plus. I am only 3mph away from needing a parachute as well ;)

haha yeah fair enough, I used to practice 1st 2nd 3rd then shut off to get 60' right but I was trying to stay out of the 11s back then

BC do a 2.9 stroker kit that fits inside the 2.5/2.6 block :thumbsup:

So we went in for a quick look over of AFR's and boost control after switching to a new exhaust manifold and rear housing with V band entry and the monster spat out another 60hp. It was not expected. We did go to a slightly bigger rear housing. 1.01a/r vband entry from the old t3 .82 split pulse. Boost increased by 2psi also.

post-12828-0-52867800-1385500154_thumb.jpg

Not bad for a GT35r :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...