Jump to content
SAU Community

Recommended Posts

Well i've used this oil in my past cars and had good experiences with it.

Now i'm about to change the g/b oil in the GT-R, but someone has advised me it's not good to use it. He mentioned that I should use the Getrag oil, didnt even know they make it.

What are ppls thought?

Direct quote from their website:

Redline Lightweight ShockProof®

A unique gear oil designed to lubricate racing transmissions and transaxles which see serious loads (not recommended for most syncro-type transmissions). It has excellent low-temperature flow which allows easier shifting when cold. May be used to obtain maximum power transfer in racing differentials which do not see high temperatures. Similar to a 75W140 gear oil, but with the lower internal friction of an SAE 30 motor oil.

Used in most road-racing differentials with moderate power and dogring racing transaxles.

That said, from what i have heard, it is a gb oil that is really only good for old and tired boxes where the synchro's have worn, and adding this oil provides a smoother change. The old "band aid for a bullet wound" type fix.

My advice: Dont use it.

This answer can be found via search. Shockproof should never be used in the Getrag 6 speeds, either should any other GL-4 75W-90 or similar style oil. The Getrag uses ATF believe it or not. I think the synthetic ATFs are ok (Transmax Z) just run a search and you'll find a definitive answer.

  • 8 months later...

160V fluid from Toyota is what you want to use (same getrag 6 speed gearbox in the Supra).

According to this link: http://www.turbosupras.com/pages/en/pages/technical/V160.htm

Castrol Transmax Z is ok as well.

160V fluid from Toyota is what you want to use (same getrag 6 speed gearbox in the Supra).

According to this link: http://www.turbosupras.com/pages/en/pages/technical/V160.htm

Castrol Transmax Z is ok as well.

i have no idea what oil in my box. its work fine, but just make a bit noise.

i did some search. the getrag gearbox is fine to have some mt90 oil or similer oil(like 70w90,70w80 75w85 etc) in it. but not the redline shockproof oil for sure.

is that right information?

Redline will know - call them. I'd be very surprised if they tell you a gear oil is ok in place of ATF.

Direct quote from their website:

Redline Lightweight ShockProof®

A unique gear oil designed to lubricate racing transmissions and transaxles which see serious loads

<cut cut>

That said, from what i have heard, it is a gb oil that is really only good for old and tired boxes where the synchro's have worn, and adding this oil provides a smoother change. The old "band aid for a bullet wound" type fix.

My advice: Dont use it.

And here's a quote from the Aus website which is under less legal restrictions compared to the USA in terms of oil usage, from http://www.redlineoil.com.au/oil-finder.asp :

Manual Gearbox Nissan 5 spd use 'Lightweight Shockproof', Getrag in R34 use 'Superlight Shockproof'. @ see handbook for Litres

I'm not recommending either way for a Getrag gearbox, just want to disagree for the entire it doesn't work with synchro's argument.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • GCG is a good company, they're a major distributor for Garrett in Japan as well.
    • Nah, OEM washer bottle and brake fluid reservoirs are fine I don't know what it is with the plastic that Mazda used, some plastics, like the washer bottle and brake fluid res are fine, and still look new after 20 years use, where as the coolant expansion tank, and PS reservoir, that I replaced with new OEM items when I first got the car, turned yellow and started getting brittle a few years later If the dirty yellow stained plastics didn't trigger me there wouldn't be an issue, but they did, much like the battery bracket....... Meh As for going back to work full time to support car stuff, nope, why, because I own a Mazda NC MX5, not a Nissan R series Skyline 🤣
    • I've never heard of CJ-motor, so can't advise you on them. I'd just go straight to GCG for a GCG highflow though. Seems no point to use a middleman. I'm somewhat surprised that the price on the CJ site is lower than the GCG retail price. Even though CJ would get a discount of some sort, you would hardly expect them to give up so much margin. Maybe the price is out of date? Having said that "I'd go to GCG"...when I did my highflow, I went to Hypergear. I did this https://hypergearturbos.com/product/rb25dethighflow/#tab-dyno-results with the R34 OP6 450HP profile. With the BB centre (extra $400) and intially with the standard boost actuator, but I eventually got him to send me the high pressure one when I got to the point of being able to actually use it. Ends up costing the same sort of money as the GCG highflow, but this is, of course, the turbo that I KNOW has a shorter length core and so moves the comp cover rearwards. The GCG apparently doesn't do that. My mechanic also swears by the GCG highflow, given that we have another turbo rebuilder who does something essentialy the same as theirs, using Garrett wheels. He says it stands up at really low revs and makes good power. I haven't pushed my HG highflow past ~240-250rwkW yet (should have a little more in it, but unclear how much) and it does have a fairly gentle boost ramp. OK, it's much better now that I have gotten my boost controller tuned up on it.  A lot of my earlier unhappiness was because I couldn't keep the wastegate flap as closed as it needed to be (including some mechanical issues). I'd still prefer it to boost up nearly as quickly as the stocker, and it certainly a bit slower than that. So maybe the GCG one is worth the first look (for you).
    • Ok thanks 🙂 I will higly consider this. Any "known" company for a good reviews and experience to send that off? Is that CJ-motor good one? Or go straight to GCG site? I need to use VPN to even find some of those "shops" let alone access them 🙂 
    • You can literally put in as much WMI as it takes to quench the combustion totally (and then back it off a little, obviously), and it will keep making more and more power. The power comes from the cooling effect of the water (and the meth) and the extra fuel (the meth, which also has massive octane). It is effectively exactly like running E85. One might be slightly better than the other, but they are damn close. But with either you can lean on the boost or the timing (or both) waaaay more than with just petrol and the results are similar. Here's the first thing I googled for an anecdotal bit of evidence. Can't access the attachment without being a gold member, but it is there for the getting if able to, or searched up elsewise perhaps. https://www.hpacademy.com/forum/general-tuning-discussion/show/wmi-vs-e85/
×
×
  • Create New...