Jump to content
SAU Community

Recommended Posts

  • Replies 93
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

ooooh very nice!... is it wrong I feel like licking the paintwork... geez Mick does some good work

ps. get some tire shine on those RE55's Snowy!

LOL - look it was 37 degs or something when I got the car. It was FAR to hot to do all the nice little things. It was almost too hot to taken any pictures let alone be fancy with them.

Hopefully one day shortly I'll get a couple more good shots. Complete with the black rims and tyre shine (just for you Nick).

Haha - less than 2 weeks. My 1st rally is on Jan 31st in Tassie. The car is being entered as a 2005 Nismo GT-R Z Tune (hence why I've done the kit).

Looks really nice andrew, I love the agressinve look of the Z tunes.

if the car is being entered into a rally as a Z tune, doesnt it have to actually be a Z tune. when they have a closer look at the car surely they would be able to tell if its the real deal?

good luck with it anyway! :happy:

Regarding competition stickers.

Why don't you buy some "paint friendly" vynle, that is somewhat easy to remove, stick the competition stickers on your vynle, then cut around the sticker and stick that to your car. This would make the removal of the stickers easier and will not peel the clear coat off your car.

The sponsors of the event really don't give a shit what adhesive they use on their stickers and if it marks/strips the paint on a car. Just an idea to keep the car looking mint, after the event has come and gone.

looks nuts dude.

question why not do the skirts in black to match the lip and more Z Tune like??? but looks hot either way

wanna sell me you stock GTR bonnet??? lol

cant believe such a hot car is only a race car :) (or is it road registered as well???)

cant wait to see this in flesh at deca or next track day.

its road registered as far as i know. you might even see it around

Looks really nice andrew, I love the agressinve look of the Z tunes.

if the car is being entered into a rally as a Z tune, doesnt it have to actually be a Z tune. when they have a closer look at the car surely they would be able to tell if its the real deal?

good luck with it anyway! :)

Well given basically none of the N1 GT-R's doing targa are actual N1's the short answer is no it doesn't matter that it's not the genuine article. You can follow guidelines and build a "replica" which is the common thing to do for many of the cars including EVO's (RS) and WRX's (Spec C, 22b etc) amoungst other cars. Then of course there is the classics. I think you'd find a large % of the entrants are in non-genuine cars simply because the genuine ones cost far to much to buy and then butcher into race cars! Hell even the 2 well know Lambo Superlegga's aren't genuine ones (just standard Gallardo's) and I bet by the time Targa rolls around we'll see a couple of R35 GT-R Spec V's listed as well.

As for the Nav Age - James is doing the job first up and Dan is stepping in for April.

nice paint job there i had my car done at mi colour when this car was there and i have to say the work done at this place is 100%

now it is a Race car and this nice paint job will be stuffed as soon as u hit the track lol

Well I just picked the car up from Mick @ Micolour who has finished fitting the new Z Tune kit and spraying the whole car.

It's come up brilliantly (pics don't do it justice - will have to get some better ones later but it's too hot out there right now). But I'm wrapped with how it's turned out :P

Looks great!

is it the nismo z-tune bits, which are about 1500 USD for the l/r front wings alone, or are they look-alikes?

does the engine vent through the sides now, any decrease in temps?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
    • Pull codes via the self-diagnosis procedure. As far as I can tell this is just a sign of transmission issues but not a code unto itself.
    • Hi All, putting the engine back together and everything is perfect except have this plug left over.. any ideas what it is for and where it goes? Is on cold side under the intake plenum *note not a stock plug, as everything has been modified Cheers
×
×
  • Create New...