Jump to content
SAU Community

Recommended Posts

Sorry to resurrect an old thread, can i get some help plz....

I have got my new bosch 040 ready to go in.

I have bought fuel resistant hose and clamps.

I went to supercheap and they didnt have chemical resistant wire... where can i get some?

Could i just use the stock fuel pump wire and solder on terminals at the end?

Cheers,

Ryan

Is there any soldering required when installing a Walbro 255? (model GSS342)

Also do these aftermarket fuel pumps have a loud whine? I don't want anything louder than the Nissan OEM fuel pump.

My walbro whines, you can only hear it bad on ignition. Once the car is running or stereo is on you cant hear it much.

No soldering done with mine. Used the crimps that came with the kit.

  • 3 weeks later...

I used this how to as a guide and I just thought I might throw up a pic of the mounting job I did on my Bosch 044.

Had to pull it out once to readjust it cause it was making strange intermittent sucky noises which I could really only hear at idle when it was hot (afternoon). Cavitation ???

post-78856-0-02103700-1355545168_thumb.jpg

I tried to get the sock sitting at just the same height and angle as the stock pumps was.

It's only been a couple of days since, but I haven't heard the sound again... yet.

Seems very quiet in general, priming sounds tough. :thumbsup:

Edited by Not a Pulsar
  • 2 months later...

Hi Guys, I have a R33 GTR that I suspect has a dud fuel pump, I hve read the info here but I has going to check for voltage at the pump before I start to pull everything apart.

There is power at the fuel pump fuse, which conector is for the pump, the brown or the gray, I'm guessing the brown as it has only two connectors. Should there be power there when the ignition is turned to on or is it more complicated than that

Cheers

  • 1 year later...

I haven`t read the replies about all the fuel pump installations but why not save yourselves some drama and leave the standard pump where it is and buy an external one Attach it to the underside of the car or in the boot inline with the fuel lines somewhere,that way the standard pump acts as a lift pump and the new external does what its supposed to do!.That way you don`t have to get messy in the tank!.

What happens if and when the Old Stock Pump dies? Nothing good.

I replaced mine for peace of mind.

Gonna be changing my 044 for a Walbro soon. Just for fun. :thumbsup:

  • 4 weeks later...
  • 1 month later...

Could anyone be of some assistance?, I've searched but have not come up with anything concrete.

I recently changed out my fuel pump to a Bosch. When I turn the ignition on I can here it pumping, the car cranks but does not want to turn over.

I've pulled the hose off the filter and there is plenty of flow, not sure where to look next? possibly the AFM?.

any help is greatly appreciated.

Have you managed to start the car at all since changing the pump?

Is the pump wired straight to the battery with a relay?

Edited by dontyellpl0x

Could anyone be of some assistance?, I've searched but have not come up with anything concrete.

I recently changed out my fuel pump to a Bosch. When I turn the ignition on I can here it pumping, the car cranks but does not want to turn over.

I've pulled the hose off the filter and there is plenty of flow, not sure where to look next? possibly the AFM?.

any help is greatly appreciated.

Are you sure you got the feed and return around the right way?

And I assume you mean the car cranks but doesn't want to run. The engine turns over when when the starter spins it?

  • 1 month later...
  • 1 month later...

just read all the replies,

imma bout to tackle the fuel pump change to a walbro 460 LPH. the thing is i think there is an 040 or nismo intank ...

thinking of just putting the new one external (external version of the walbro E85) and use it as a lift pump.

but for peace of mind i would rather change it but dont really wanna go through all the hassles tho.

but in saying that my fuel gauge works but not getting the warning light on low fuel?

cant be the low fuel sender kaput? coz the gauge still works but not the fuel light

already replaced the fuel light bulb and still nada.

any thoughts?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...