Jump to content
SAU Community

Recommended Posts

as stated on another thread

evolution automotive at eight mile plains should be able to help you out

www.evolutionautomotive.com.au

they don't own a dyno.

APC, didn't know they did rwc. Will give them a call.

Otherwise, it's going back to Bris Tune and Turbo and will have to get rwc separately. Just a pain the ass as it's a farken waste of time for me.

Hi guys,

Had a quick search but couldn't find anything.

After somebody who knows what they are doing, for a tune of a power fc, and also that can do a rwc.

Around southside, or logan area preferred.

Cheers

No better tuner than pete frm PRO TORQUE ive got a 32 went in with 250rwhp an we ended up with 402rwhp. He knows what his doin with the power fc's well any ecu... he's at pimpama just off the highway near SS INDUCTIONS. totally recomend this guy

No better tuner than pete frm PRO TORQUE ive got a 32 went in with 250rwhp an we ended up with 402rwhp. He knows what his doin with the power fc's well any ecu... he's at pimpama just off the highway near SS INDUCTIONS. totally recomend this guy

is that 20 psi on a stock engine? if so enjoy the 400hp as much as u can cause it won't stay like that for long.. seen it many times

have you tried efi performance?

they have moved to beenleigh which isnt too far from logan!!

give sean a call and have a chat to him :P

their details if your interested

EFI PERFORMANCE unit 3/15 Emeri st stapylton (Yatala Drive-in) (07) 5520 6477

Edited by rb25kateosaurus

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...