Jump to content
SAU Community

Recommended Posts

Hey guys,

quick question . i have CE28's on my 34GT-T.. and they have a +45 offset on the rears... is that really bad? cause i've been looking around the forums and most of you guys only have +12 or so. So im not sure if my offset is bad or not? I have 265/40 (It could be 35.. not sure haha) R18 Direzza's if that will help..

Thanks Jin

Link to comment
https://www.sau.com.au/forums/topic/254686-confused-with-my-rims/
Share on other sites

If they are clearing all suspension bars and rods & dont scrub the guards when cornering hard then its fine.

Hard to work out whats the ideal offset for a car when you go to buy rims, I got a R32Gtst & put drifteks on it. Rears are +36 offset and clears all the above but they stick out about 5mm past the outer edge of the rear guards- defect waiting to happen LOL- was assured they were legal when I bought them- but meh looks phat so they stay

Hey guys,

quick question . i have CE28's on my 34GT-T.. and they have a +45 offset on the rears... is that really bad? cause i've been looking around the forums and most of you guys only have +12 or so. So im not sure if my offset is bad or not? I have 265/40 (It could be 35.. not sure haha) R18 Direzza's if that will help..

Thanks Jin

stock offset for gt-t on the rear is +38 and front is +35,

so you shouldn't have an issue with +45

quick question . i have CE28's on my 34GT-T.. and they have a +45 offset on the rears... is that really bad?

Isn't that greater than stock? If so, yes.

cause i've been looking around the forums and most of you guys only have +12 or so.

I'm pretty sure that's on GT-Rs only, unless these GT-t owners have really thin wheels.

Isn't that greater than stock? If so, yes.

I'm pretty sure that's on GT-Rs only, unless these GT-t owners have really thin wheels.

luke enr34 runs 18x10 +18 i think on just rolled guards, i ran 17x9 +16's on mine for a while, now i run 17x9 -1's on small flares.

u just have to know what ur doing to make them fit.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...