Jump to content
SAU Community

Recommended Posts

This question needs some physics knowledge;

1. the cooler the air the more power

2. a fmic allows more surface to attract cold air than TMIC and no heat sink

3. water sprayed onto a TMIC causes a physical reaction Ie water evaporation reduces the temp on the IC.

thus with this knowledge has anyone tried a water spray on to the FMIC to see if it makes a large difference. The rapidity of the evaporation should make it more beneficial than it is to a TMIC.

From a "text book" point of view it should work as well as a more efficient IC but at a lower cost.

But other than getting the spray on to a vertical surface what other faults are there in my thinking.

Link to comment
https://www.sau.com.au/forums/topic/25641-more-intercooler-power/
Share on other sites

  • Replies 70
  • Created
  • Last Reply

Top Posters In This Topic

My thoughts are water sprays arent too bad an idea. If it can be done cheaply that is.

Things i would consider are the additional weight of the setup, and the switching of the spray. Do you use it at lights, under full throttle, only when on full boost, at a preset temp?

My thoughts are that if your FMIC is adequately sized in the 1st place then there is little to be gained...

The problem is that you wanna be spraying BEFORE you jump on the boost.

If your spraying WHILE you're on the boil, it's already too late.

I assume you would have to activate before you boost. With that additional workload for you, I doubt it's worth the weight in water.

T.

dominic,

well in therory i think this would make a difference, but in the real world the actual gain would probably be minimal. i think this would be a better idea for those of us with teh stock intercooler.

The 1kW you might gain is not even worth the time spent on installing i would say.

Like some others said there doesn't seem to be much benefit for street use. This is because if you are only on boost for short periods the IC works more like a heat sink than a radiator.

It absorbs heat from the inside while you boost, and if you back off it put the heat back in the off boost air. It spreads the heat out if you like. Only if you boost for extended periods (track or high speed) does the cooler warm up enough to dissipate to air, where spraying would help.

I'm having trouble believing some of what I'm reading here. Have some of you lot passed year 10 physics yet ;-)

1. "The 1kW you might gain is not even worth the time spent on installing i would say." - 1KG - I drop turds heavier than that and I am yet to in forums such as "12 second skyline" the importance of the driver taking a crap prior to hitting the strip. Only jockies and F1 teams worry about 1KG. Using this logic why bother installng a FMIC that weighs more than the cut down factory option, and as for larger turbos, do i need to worry about the weight they add?

2. If the additional weight translates to more power at a rate better than the cars original power to weight ratio its got to be worth it. ie a 1000kg car wit 100rwkw then adding 1Kg you need to increase the rwkw by 0.1 to maintain the ratio (yes its a simplified example and i am aware of the mathematical floor in these numbers bet it demonstrates my point)

3. Whilst there is some merrit in the argument that in street driving the cooling benifits are not occuring when needed, have you considered the fact that the water will cool down the "heatsink" faster and hence the efficiency of the FMIC will be available sooner. And in addition any increase in the cooling efficiency (at any time whilst running) is still benificial.

anyway thats my 2c for what its worth.

Oh, Physics, thats apples falling out of trees isnt it.:D

On paper what volume of 25deg C water do you think you would have to spray over an intercooler (and what area) core to see a 1 deg C drop in inlet air. Im guessing its more then most reservoirs can provide.

Thats said it will help disipate heat from the intercooler which is a good thing, but just how much heat transfer then takes place at a premium over the ambient air is questionable as far as improving performance.

The car really has to be moving and the water atomised well and spread over the entire core if its hoped to work.

1kg ? thats only a full 1L water reservoir. My guess the installed system would weigh more like 4-5kgs. Still not a lot of weight, but why carry an extra jack, or space saver tyre in the car.

My thoughts are if your a DIY person then give it a go, it cant hurt, but if you start to spend hundreds of dollars i would question its benefit.

Water injection on the other hand...can provide a much more tangible increase in performance.

Originally posted by butthead

How about putting the air con pipe into the intercooler

Using the aircon will just rob more power.

I think ULA32 has water spray on his R32GTR and the only additional power he has seen is about 5rwkw with the spray on during a dyno run.

Not worth the effort i recon.

If you really wanted to cool your cooler down, hook a chemical fire extinguisher to it and spray it. That will lower the coolers temperature to below 0 degrees.

Guest RedLineGTR

"If you really wanted to cool your cooler down, hook a chemical fire extinguisher to it and spray it. That will lower the coolers temperature to below 0 degrees"

Good for runs down the quarter mile...but dont think ya wanna stop every 10min while driving.heheh

Originally posted by 4door_Sleeper

I'm having trouble believing some of what I'm reading here. Have some of you lot passed year 10 physics yet ;-)

1. "The 1kW you might gain is not even worth the time spent on installing i would say." - 1KG - I drop turds heavier than that and I am yet to in forums such as "12 second skyline" the importance of the driver taking a crap prior to hitting the strip. Only jockies and F1 teams worry about 1KG. Using this logic why bother installng a FMIC that weighs more than the cut down factory option, and as for larger turbos, do i need to worry about the weight they add?

2. If the additional weight translates to more power at a rate better than the cars original power to weight ratio its got to be worth it. ie a 1000kg car wit 100rwkw then adding 1Kg you need to increase the rwkw by 0.1 to maintain the ratio (yes its a simplified example and i am aware of the mathematical floor in these numbers bet it demonstrates my point)

3. Whilst there is some merrit in the argument that in street driving the cooling benifits are not occuring when needed, have you considered the fact that the water will cool down the "heatsink" faster and hence the efficiency of the FMIC will be available sooner. And in addition any increase in the cooling efficiency (at any time whilst running) is still benificial.

anyway thats my 2c for what its worth.

mate are you broken??

1) yes i have done year 10 physics, in fact i have done university physics and will have a degree in biomedical science in a few weeks so how's that for a science background?

2) why quote my post about minimal power gain, then go on bagging about a weight gain which i did not nemtion anything about? in fact i said that it would make a difference in theory (which you said in your point #3) so the fact that you questioned my intelligence makes you the dumb one. you can spray tll your face goes blue but it ain't gonna make much difference on the street.

Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
×
×
  • Create New...