Jump to content
SAU Community

r30 skylines

rsx84

By rsx84,
in Classic & Vintage (1950's-1980's)

 Share

Recommended Posts

Ghostrider Grand Master

Ghostrider

Posted
Posted
Sorry I meant the black interior with the grey/silver inserts.  I've never seen one (or pics) with the red insert interior (or any exterior colour other than white for that matter... do you have pics of yours :D)

I picked up a Recaro for mine today at Jaustech, its a bit thrashed out but had the most aggressive bolsters of all their seats.   Also got a GReddy adjustable overboost valve

I need to get the rails done for the seat though

I take it noone has replaced the bushes in their block to strut tower brace??????

btw Ghostrider... do you have two coupes?

No! just one PNV that is white/siver. Although, if the PNV hadn't come along when it did, my MR30 4 door Ti Hatch was going to become a 2 door. I had all the sides lined up in Japan to come over. An estimated $6000.00 was going to be the cost to make a 2 door Ti Hatch. Interesting concept eh!!!!

I know what you meant about interior, I have asked him to send me some pics of his blue sedan incl interior. My pics are to large, to many KB's for this site, when my digital arrives I will take some more and post them.

As for your bush repacement, I am looking for a damper, rather than a fixed brace. Jenesis sells one in Japan, but there must be something here in OZ that is similar.

  • Replies 2k
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Ghostrider Grand Master

Ghostrider

Posted
Posted
just found this pic in the r31 club, its from the SAU show and shine held recently is it anyones here??

Not me!!!!! thank christ, it looks pretty bland don't you think, looks a bit ordinary, should be lowered to hell and some fats and my body kit.

rsx84 Veteran

rsx84

Posted
  • Author
Posted
Not me!!!!! thank christ, it looks pretty bland don't you think, looks a bit ordinary, should be lowered to hell and some fats and my body kit.

does look pretty bland!! but in good nick though, i'll get some updated pic this weekend of the beast with the cooler fitted and the new rims! might see about starting a pic thread here for anyone else how wants to put up some pics of thier beasts!! i'll see what size pics they take here and let every one know! :D

Boof Mentor

Boof

Posted
Posted
HIGHER?????????

You absolutely sure???????

You mean higher numbers or higher ratio???

Yes higher!! Pretty simple thing to work out isnt it...I want a HIGHER ratio diff centre!! Would prefer to **** this clutch pack shit off as well and go mechanical but can't see that happening in a hurry..So rebuilding the and shimming the centre is on the cards as well now!!

Does anyone know what the rough sorta price for a dump pipe is to be made??? I need one made soonish but as i've got a full kakimoto exhuast on my car im not really in the mood for cutting it up!!!

Ghostrider Grand Master

Ghostrider

Posted
Posted
Yes higher!!  Pretty simple thing to work out isnt it...I want a HIGHER ratio diff centre!!  Would prefer to **** this clutch pack shit off as well and go mechanical but can't see that happening in a hurry..So rebuilding the and shimming the centre is on the cards as well now!!

Does anyone know what the rough sorta price for a dump pipe is to be made???  I need one made soonish but as i've got a full kakimoto exhuast on my car im not really in the mood for cutting it up!!!

OK Shane,

260Z's came out with R200 mechanical open 3.7:1 standard. That would be the easiest way, get one of them & change the LSD centre to it.

Boof Mentor

Boof

Posted
Posted
OK Shane,

260Z's came out with R200 mechanical open 3.7:1 standard. That would be the easiest way, get one of them & change the LSD centre to it.

Ummm don't i losse the effect of LSD then mate? Or are u saying that the 260z's came centre can be rebuilt into an LSD??

Ghostrider Grand Master

Ghostrider

Posted
Posted
Ummm don't i losse the effect of LSD then mate?  Or are u saying that the 260z's came centre can be rebuilt into an LSD??

As I see it, the LSD part of the centre is interchangeable with other R200 crown & pinions.

Therefore you would use your LSD with the 260 gears, making a 3.7:1 LSD package when completed.

I have a 3.692:1 (3.7) viscous LSD centre from an R32 here, that would be cheap & I'm told the centres can be swapped into the long nose case.

Boof Mentor

Boof

Posted
Posted
As I see it, the LSD part of the centre is interchangeable with other R200 crown & pinions.

Therefore you would use your LSD with the 260 gears, making a 3.7:1 LSD package when completed.

I have a 3.692:1 (3.7) viscous LSD centre from an R32 here, that would be cheap & I'm told the centres can be swapped into the long nose case.

I was lead to believe that the long nose centres and the short nose centre's arnt interchangeable??

rsx84 Veteran

rsx84

Posted
  • Author
Posted

sorry to interupt, does anyone else get the emails from jenesis! if you do do you know what language is it in as i can't translat it?? heres what i get with there emails??

@@QQQQQQQQQQQQQQQQQQQQQQQQQ 2004. 4. 1 QQ

@@„ª„ª„ª„ª„ª„ª„ª„ª„ª„ª„ª„ª„ª„ª„ª„ª„ª„ª„ª„ª„ª„ª„ª„ª„ª„ª„ª„ª„ª„ª„ª„ª„ª„ª

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Marek
      Hi everyone.

      By Marek · Posted

      Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • DanMac34
      R34 Speedo not working after manual swap

      By DanMac34 · Posted

      Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • joshuaho96
      Speed Sensor replacement

      By joshuaho96 · Posted

      Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • QB6SAGR
      Tein Circuit Master- rebuild worth it?

      By QB6SAGR · Posted

      Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...