Jump to content
SAU Community

Recommended Posts

  • Replies 2k
  • Created
  • Last Reply

Top Posters In This Topic

i can supply pics of my 4 door, just recently been painted but ive been a bit slack and not taken any photos.

also i tried asking in another section but didnt get much response. is a newer r200 diff centre able to go into a z31/r30 r200 housing?

Yes it can mike, but all the new LSD's are viscous and not worth sh!t for what we do.

The ratios are fairly high as well. I have a manual R32, S13 one here for next to nothing, cost me over $400 but will be glad to see the end of it. It's 3.692:1

adam_rsx - mine is one peice rubber lip. it doesnt extend that far it basically is like, from a side on view, like this --> |/

if u get it .. haha like sortof triangular, thinish rubber that bolts underneath by heaps of screws and goes around the side a bit, about 1/3 of the way back towards the wheel arch from the front.

haha hard to describe, but sounds more like the GTS-R thing to me? rubber lip, one peice, bolts on !

Yes it can mike, but all the new LSD's are viscous and not worth sh!t for what we do.

The ratios are fairly high as well. I have a manual R32, S13 one here for next to nothing, cost me over $400 but will be glad to see the end of it. It's 3.692:1

whats the differance between viscous and mechanical? all i want is for both wheels to move when i launch as im not a drift man. my current ratio is 3.77:1 on an r200 open wheeler and seems quite good. how much we talkin for the diff mate, and is it just a centre?

viscous suposed to work harder in a strait line on hard[good grip] surface or long gravel/ice roads.when cornering and in softer stuff[sand ice] the idea is the work like a tourque convertor and dont overload the wheel with grip.

Ive see 2 types one locks harder if the diff center liquid heats up.so there is no preload as such and one wheel free spins.

GTS-R had a one piece rubber bar/lip I think, I'm pretty sure that yours isnt one of them.  Looks more like the fixed fibreglass lip that some R31 guys fit... how far back does it extend?

some japanese and exported R31 have a small strip bolted[2 piece] under the apron.in africa it comes with a/c to add air flow.like honda prelues.

Since I know a bit on HR31's,I'll chuck 2c in. :(

The lip that lowers itself (Autospoiler) was standard on GTS-X's,and option on GTS. The GTS-R lower lip is a similar shape,but extends right round the 'corner' to the end of the bar.The GMS HR31 race cars had a one piece bar,that looks like a lowered Autospoiler(but its fixed,being 1 piece) There were also a couple of aftermarket "lips" as well,and no doubt Nismo/Autech,etc options as well. ;)

GHOSTRIDER:- what oil did you say you used in your diff? Some kind of full synthetic I think?

How does it preform? I assume you still use a stock mech centre?

And is your HR30 on the road at the moment?

tar

Yes it can mike, but all the new LSD's are viscous and not worth sh!t for what we do.

The ratios are fairly high as well. I have a manual R32, S13 one here for next to nothing, cost me over $400 but will be glad to see the end of it. It's 3.692:1

and everything lines up cool and the axels fit ok too? my life just got alot better if its true.

Since I know a bit on HR31's,I'll chuck 2c in. :)

The lip that lowers itself (Autospoiler) was standard on GTS-X's,and option on GTS. The GTS-R lower lip is a similar shape,but extends right round the 'corner' to the end of the bar.The GMS HR31 race cars had a one piece bar,that looks like a lowered Autospoiler(but its fixed,being 1 piece) There were also a couple of aftermarket "lips" as well,and no doubt Nismo/Autech,etc options as well. :)

GHOSTRIDER:- what oil did you say you used in your diff? Some kind of full synthetic I think?

How does it preform? I assume you still use a stock mech centre?

And is your HR30 on the road at the moment?

tar

1. Mobil 75W/90 full synthetic is the oil. It performs as well as Royal Purple, Penrite, Castrol etc and is readily available for top up when necessary.

2. My R200 4.1:1 is a mechanical CUSCO centre LSD with 80 odd lb preload and I have a Nissan 3.9:1 as a spare.

3. No! the car is not on the road at present, but as soon as it is I'm heading your way sort of, got to see a mate on The Gold Coast.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...