Jump to content
SAU Community

Recommended Posts

  • Replies 2k
  • Created
  • Last Reply

Top Posters In This Topic

']wats the max power u can get from a stock turbo FJ? just curious.

and also wat management systems are you guys running? do u have seperate coils rather than sticking with dizzy n shit? (on FJ20s if ne1 has em!)

wolf 3D are good for the fj, they could also be able to provide a simple plug in and play system for you now, $1500+ tuning..

has anyone found info on r30s on any other forums?

There was some discussion on Skylines Downunder until the KIWI's got all funny.

Probably because it is their forum, but were out numbered by aussies, on all forum topics excluding NZ.

But absolutely nothing like this thread.

And there was a Nissan Skyline - Paul Newman sales publication on ebay the other day, that I think I beat crimmo to. By the sounds of the advert, it may have some interesting info in it that I will post.

Things like "wind tunnel tests" etc, on all 1983 > R30 models including DR's & HR2000GT ES & 4 dr's & Hatch 2000GT E etc.

1.  Mobil 75W/90 full synthetic is the oil. It performs as well as Royal Purple, Penrite, Castrol etc and is readily available for top up when necessary.

2.  My R200 4.1:1 is a mechanical CUSCO centre LSD with 80 odd lb preload and I have a Nissan 3.9:1 as a spare.

3.  No! the car is not on the road at present, but as soon as it is I'm heading your way sort of, got to see a mate on The Gold Coast.

1.Sounds good.

2.Good to know,as I'm sure the R32> R200's with the viscous lsd wouldn't need the same spec oil as the early mech R200's.I've ben wanting to confirm a good mech lsd oil with someone who actually has one,not a sales person who thinks an HR31 coupe is a fancy Pintara.

3.Any estimates on when it will be? You'll have to stop over in Port Macquarie on your way...you know,stop,revive,survive.....and so I can check out the '30! :cheers:

']wats the max power u can get from a stock turbo FJ? just curious.

and also wat management systems are you guys running? do u have seperate coils rather than sticking with dizzy n shit? (on FJ20s if ne1 has em!)

I had an EMS QI-4 fuel and ignition ecu running mine.Used the stock FJ dizzy.The EMS was good,could work with several factory pick-up systems.

I'd like to go multi-coil in the future though...

Only problem with the wolf that i know of with the FJ dizzy is u have to get it modified...Bit of hassle for someone like me in SA where if i get defected then i have to try to find a standard FJ dizzy...I am considering going for the EMS 8860 seems like a good piece of equiopment!!

Ghostrider i beleive that u might've beaten Crimmo to that, i was talkin to him last week and he was telling me about that book seems like its quite a handy piece of gear to aquire!!

Yeah the 8860 sound as good as a Motec on paper,and you couldn't complain at $1600.....

If you try getting in touch with EFI Hardware www.efihardware.com they have a programmable ECU (HAWK) and has been working on plug & play systems.

The Hawk has had some pretty good reviews from Zoom when they last did a comparison.

Cost is only $1300.00 or there abouts, but don't know if anyone does them in Adelaide. They seem to be Haltec mad in Adelaide.

Wolf do the V4 Plug & Play ECU which is $1395 for the ECU itself then install and tuning take it to around $2200 ready to drive away. but then i think u have the cost of the multi coil setup added to that so it could get pretty expensive :D

but todd off these forums with white dr30 here in perth is happy with his he is running Wolf V4 with multi coils and making 360 odd rwhp quite happily!

i was hoping for a cheaper sortof alternative like microtech or something is all. wondering if anyone has gone that way. i only earn 200 a week doing nightfill so was hopin there mite be a cheaper one that'd do the trick! that EMS 8860 i guess is $1600 just for the ECU, then tuning install etc would run it out a few hundreed more expensive that the Wolf V4 p&p i guess.

ah well i dont have 2k+ for an ECU atm neway, but i guess it seems Wolf V4 is gona be the way to go in the end :) :) better hope santa brings me a big wad of cash this year haha

Yeah the 8860 sound as good as a Motec on paper,and you couldn't complain at $1600.....

Yeah thats what i rekon to!! My mate is currently having it setup on his series 4 and its a pretty wild motor in there so once thats all done then i shall decide, but so far im impressed with it all! :aroused:

Ghostrider : not everyone in adelaide is haltech mad, but the majority of people here are..If not then like PFC al depends on who u go to really, so many people deal with the same ecu's so its not like deepnds on the workshop u goto depends what ecu u use cause most of them will use 99% of ecu's available

.75 degrees sideways, just bought a r31 with an rb20det in it running a older wolf3D, version 3 i think, the bloke who had it before didn't know that there is a locking system that requires a pin number to start the car if active. my mate went to change the pin and the car wont start!!! had to sent the computer to sydney to get it changed to the new pin so it will work...poor bastart had the car for 24 hours then its been sitting there for the last 48 unable to be driven!

oh my mate ran a microtech DIGI 1 (or was that 2??) on his FJ20.

you can pickup alot of stuff second had cheap and on ebay and stuff, i know a few guys that have been doing so recently.

what ecu's out there are able to run in closed loop? i know my microtech doesn't :(

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...