Jump to content
SAU Community

Recommended Posts

Who has run the genuine medium semi's on a GT-R before?

As in either the dunlop mediums (propper mediums - not the hard mediums) or the RE55 TT's on a GT-R before?

I was just curious as to what kind of distances they gave before "going off". I've heard it is as little as 5km's but I don't know of anyone that has actually tried.

Link to comment
https://www.sau.com.au/forums/topic/258267-medium-compund-semis/
Share on other sites

If you are thinking for Targa....the Medium/Hards are very close to the wear limit by the last day and its a 2min penalty per tyre you change. Not worth the chance unless you can get away with it like a wrx on softs.

I've run kumho soft/wets in the dry and they lasted about 250klm of mixed track and road. The grip was amazing on a single lap though.

Well remember for Targa I'm only doing Rookie (so 2 days - not 5).

So I'm not worried about lasting the distance but I am worried about them being actually worse than the hards on the longer stages. My biggest worry is Day 2 where there are 3 stages with basically no touring (35km's with less than 5kms touring in the middle).

But if they will get through a long run ok then they may be a good thing - especially if we get some wet.

Years ago we tried the medium 02G on an R33 GTS with similar grunt to your thing Snow. They were good for about three flying laps of QR club circuit before they stared to go off.

The 03G may be better?

I reckon the SR compound is the go, you'll overheat even those on the way down the Sideling, and thats a big money stage if you can get it all together. Not hard to gain 15 to 20 seconds on your rivals with a grunter like yours mate.

We had some D03 M1's we tried at Symmons, we found they build up pressure way to fast. I'd do a 5 lap's, come in and drop them to 32 psi, do 5 more laps and have to drop another 5-10psi out to bring it back down to 32 psi. and you could do that all day long, i'm surprised there was any air left in them.

I run D02 R1's on my R32, and they are much more stable. The RE55's SR on the Targa car are very stable too.

Edited by sav man
Right ok. Prob best sticking to the hards is what you are saying.

It's just that I can get 265/35/18 RE55's TT's for $300ea! Thats a bargin! lol

Snowy: Bargain 265's mate http://cgi.ebay.com.au/TYRES-NEW-BRIDGESTO...A1%7C240%3A1318

I bought 17's on the weekend and they cost a hell of a lot more than that!

Dane - that is the TT's I'm talking about :D Can buy them now for $600 / pair.

But I think unfortunately they aren't going to work at Targa and I don't do enough normal sprint days to justify getting them anyways.

Snowy we ran Medium 03G's back in the Rookie 2007 on an S15, came up to temp really good and the only issue I can think of was right towards the end of the sideling it got a bit taily (im trying to think though was it tyres going off or that the road had started to break up).

They still had heaps of tread left on them at the finish as they survived a Circuit Series round after that and a god almighty skid and ringies before it got sold.

Having said all that I just noticed Dunlop don't make a 265/18 in medium so scrap that, only make a H and an R comp (the SR that is being referred to by some).

If

Snowy we ran Medium 03G's back in the Rookie 2007 on an S15, came up to temp really good and the only issue I can think of was right towards the end of the sideling it got a bit taily (im trying to think though was it tyres going off or that the road had started to break up).

They still had heaps of tread left on them at the finish as they survived a Circuit Series round after that and a god almighty skid and ringies before it got sold.

Having said all that I just noticed Dunlop don't make a 265/18 in medium so scrap that, only make a H and an R comp (the SR that is being referred to by some).

Driving style, road temp, and car weight has more to do with this equation. I know guys who did the full TT last year on Dunlop M in evo.

The reason why they dont make M in that size is that those tyres are normally fitted to heavy cars.

Dunlop R, Bridgestone (wet not so good) seem to be the front runners unless your gt-r ends in "Thrty Five"... then you can use BJ all rounders.

TT

Edited by Targa Tom
Snowy we ran Medium 03G's back in the Rookie 2007 on an S15, came up to temp really good and the only issue I can think of was right towards the end of the sideling it got a bit taily (im trying to think though was it tyres going off or that the road had started to break up).

They still had heaps of tread left on them at the finish as they survived a Circuit Series round after that and a god almighty skid and ringies before it got sold.

Having said all that I just noticed Dunlop don't make a 265/18 in medium so scrap that, only make a H and an R comp (the SR that is being referred to by some).

If

the SR people refer to are a bridgestone compound. not dunlop R's. :wacko:

Yeah with SR standing for Seriously Rediculous in regards to price with the Dunlops.

In 265/35/18's the prices I can get are:

Bridgestone RE55 TT's - $300ea

Bridgestone RE55 SR2's - $550ea

Dunlop DZ03G R's - $655ea

You can see why I wanted to know if I could use the genuine mediums. I could get 2 sets for less than a set of Dunlops.

dunlop price varies dramatically with the size. eg:

225/45*17 $465 only about $30 more than most tyres up here.

245/40*17 $560 about $100 per tyre more than other brands (local Brisbane prices).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...