Jump to content
SAU Community

Recommended Posts

JoeyJoJo (I might have missed this)but where are you travelling now to get your fuel. I am holding out on doing an E85 tune because I want to be able to drive to get fuel and not take a jerry can :blink:

Is there much in the East side of Vic now? Someone was trying to tell me a servo in Hastings has it.

Cheers

-Jez

  • Replies 489
  • Created
  • Last Reply

Top Posters In This Topic

hoppers xing united.... but its sooo worth the trip...

i'm not gonna use anyone but united as they are looking like being the biggest supplier for the next couple of years.

as different places start to blend the ethanol with differing fuels 91 / 98 etc, i'm just gonna stick to tuning on the 91 ron blend that united offer as then i dont have to worry.

i'm not positive on dates, but united did say that kings way had it on their website for a while (it never did) and kingsway are due to have all their tanks replaced soon, so i'm guessing that's the next site. fingers crossed!

Hrmmmm, the missus live in werribee so hoppers aint too bad, but its a 100k drive for me just to get fuel. :blink:

Once there is one close to Dandy I will probably give it a go, probably need bigger injectors again:(

any car stands to make an increase, turbo cars moreso...... you have a highflow setup yes ash? if so expect a 280ish result :blink:

ye man highflow. going in to trent sometimes in Jan to get 670cc injectors installed and maybe cams if i can get my hands on some. mods apart from teh turbo is pretty similar to yours

highflow turbs

HKS intake and exhaust cam gears

denso 670CC injectors (to be installed in jan)

bosch fuel pump

Z32 AFM

Apexi PFC boost controller (to be installed in jan)

cams (still being looked into and hopefully installed in jan)

3" turbo back (might go decat)

will have need to have a chat with trent to see how it wll all go.

why did you get rid of vct?

have a good chat to trent about the cams, they are a lot of $$$ for what is in my opinion a negligible power gain.... unless you really destroy response

from the website...

United Ethanol 85 Locations

NSW

Service Station Address Phone

ROZELLE (SPEEDWAY) 127 Victoria Road 02 9555 7619

SA

Service Station Address Phone

SEATON 169 -171 Tapleys Hill Rd 08 8985 3486

VIC

Service Station Address Phone

HOPPERS CROSSING 160 Old Geelong Road 03 9748 3601

why did you get rid of vct?

have a good chat to trent about the cams, they are a lot of $$$ for what is in my opinion a negligible power gain.... unless you really destroy response

Speak to Trent about JT's R33, T67 very responsive and makes killer power on PULP, still runs the VCT IIRC.

I have been in both Joey's and JT's R33, although Joey's is tad more responsive they are both great examples on how to tune an RB25.

why did you get rid of vct?

have a good chat to trent about the cams, they are a lot of $$$ for what is in my opinion a negligible power gain.... unless you really destroy response

i didnt. previous owner got the gears installed

just drive to hoppers to get fuel, as Hamish says, worth the trip.

My R34 is permanently on E85, street duties, track duties... E85 all the way :)

I got Creatd to highflow my stock injectors, because the stockers have a nice 4 hole pattern, they're now 780cc i believe.

SOMETHING NO ONE HAS MENTIONED IS OILS AND COMPATIBILITY WITH E85

Consider using oils that are methanol safe. Ive been speaking to a few engine builders and machinist involved in E85 powered race cars (hint) and wear is UP TO 20% FASTER than experienced on "normal " fuels.

SOMETHING NO ONE HAS MENTIONED IS OILS AND COMPATIBILITY WITH E85

Consider using oils that are methanol safe. Ive been speaking to a few engine builders and machinist involved in E85 powered race cars (hint) and wear is UP TO 20% FASTER than experienced on "normal " fuels.

something i did look into with my oil choices. I found some stuff saying Royal Purple was suited to E85, but to be honest i couldn't find a whole lot about it. Asked about it over at bitog.com but didn't get much of a response.

Did pretty much confirm that you need to change oil a decent amount more frequently due to the E85 though.

When you talk about wear Trent... are you talking on engine components or UOA of the oil? Hopefully you're talking about the oil :ninja:

not much, but some advice from bitog

"High PAO, low ester, high TBN IMO. You want something with excellent hydrolytic stability and acid fighting properties. Mobil 1 Extended Performance, Amsoil, and I think some grades of Fuchs would probably be great choices for you."

i'm running 5w30 Amsoil at the moment, previously 5w30 RP - but yeah, happy to try others if you've got the inside scoop Trent :ninja:

EDIT: the other thing i found, which isn't much, is that for the owners manuals of the u.s. flex fuel cars, they don't recommend any specific oil, just that it needs to be changed more regularly (3,000 miles seems to be the norm)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I'm seeing torque specs all over the place for the OUTER tie rod, but none for the INNER tie rod, where it connects to the steering rack. Even in videos, people are just tightening em up as much as they can with a wrench and that's it. Anything tightened down without torque makes me nervous. Anyone know what the spec is for it?
    • Hope you had a great time here in our tiny country.   The JDM scene we have here is quite small, it's mostly BMW, Volkswagen with burble tunes haha. But the few JDM cars we do have in the scene are pretty nice. Some of my friends drive cool s14's too. Both built engines, red one makes abt 500, blue one abt 400 i think?
    • Ye good idea , would have never thought of something like that. Might aswell do it to every pulley and the balancer while I’m there 
    • Use an LS1 or similar, via kit like Frenchy's. But.... It's probably not the alternator. It sounds like belt squeal, which would be because the pulleys are glazed. Rub every groove on the pulleys with 120 grit paper. Report back. Oh, and new belts afterwards too. The old new ones will be shitted up already.
    • Hello all I have 2 r34 sedans , one turbo one na, only recently aquired the na 34.  Man what is with these things.... My turbo 34 started sounding like a super charger, it was screaming at anything above 4000rpm , I took the alternator apart and replaced the front bearing which is the only one I think you can access and it did not fix the issue so presumably the bearing in the rear of the alternator is gone. ( diagnosed it was the alternator by taking off the aux belts one by one to figure out which pulley or bearing it was )  My friend gave me one he had lying around, Installed it , it did not squeal for maybe 500kms and now its started to squeal again briefly on startup  Recently got an na r34 and I replaced the timing belt, water pump + all the auxillirary belts. Runs amazing but it suddenly developed the same squeaking problem but significantly worse, Ive had my neighbour come down screaming at me because it was waking her up everytime I moved the car. It takes a good 2 minutes before it quietens down.  Im yet to diagnose where its coming from but im fairly sure its coming from the alternator aswell. My question isnt about how to fix it but rather where can you get a new alternator for an rb25 neo??? Ive searched everywhere but I havent been able to find a direct fit oem type replacement thats not genuine. All the automotive stores sell an oex one - BXA035 - which I picked up for cheap through a friend with staff discount , got it home only to find the connector is completelty different.... As far as im aware bxa035 is for rb20/30's and after a bit of figuring out the bxa035 has an ev14 type connector, which is tiny compared to the rb25 connector. I actually had an ev14 connector lying around which I was considering just replacing the bigger plug with to get the alternator working but the bxa035 is rated for 70amp vs the rb25 alternators are 90amp ( or so ive been told ? ) That paired along with the fact im about to install an amp + sub in the back and I have the stock sized small battery Im not sure itll do the job unless anyone has another opinion?  I know and have seen all the websites selling the ls1 alternator conversion kit but I am not going down that route, nor do I have the money to. Hopefully I can figure out how to get 2 brand new alternators for both cars. I would buy second hand which there seems to be many of but considering how common this seems to be im sure If I installed a second hand one it would start squealing in no time  Or even better if anyone knows how to fix the issue directly with the alternator itself... Any input appreciated Thank you     Link for bxa035 connector picture
×
×
  • Create New...