Jump to content
SAU Community

Recommended Posts

Yeah it was kinda introduced half way throughout the day. We were told we'd need one for the afternoon but not the slalom. But there are trees and concrete barriers (which never used to be there) at the end of the slalom course now so I guess he wanted to be safe than sorry :P

Major fun though. Loved the whole day.

also suspension comes into a major role

my plans are reshim my lsd d2 coilovers rear camber arms front and rear strut braces and solid craddle bushes should be alot more better and easier than what it is now

and a kakimoto exhaust might free things up a bit because sum wise ass decides stock exhaust to the last flange at the muffler get a cannon, 10 mill industrial pipe two and a half into 2 inch !!!!!! not suffocating at all

what suspension mods have you performed jimmy?

Edited by LUME

Suspension is a cusco front strut brace, and TEIN Super-street coilovers. The coilovers were the best thing I did. And then I am running the GTS-t brakes and R200 diff aswell (apparently it was shimmed from the previous owner).

Luke - Your R34 is NA? That is one tuff NA 4dr. Love it.

Edited by -Jimmy-
  • 2 weeks later...

I unfortunately don't have any videos, but I have a R33 GTS25 sedan that is used for circuit racing/hill climbs/ auto crosses and motokahnas, the relability of the car has been absolutely brilliant, it's done close on 240,000km now and is still going pretty well considering.

The only real gripes I have with the car is on the circuit it could certaily do with a bit more power on the straights, and in the motokahna events it's one hell of a big car to throw around when the cones are so close.

When taking part in ciruit events I can ususally finish in the first 33% of the field depending on the track, so with the right suspension mods the GTS25 can do fairly well.

I unfortunately don't have any videos, but I have a R33 GTS25 sedan that is used for circuit racing/hill climbs/ auto crosses and motokahnas, the relability of the car has been absolutely brilliant, it's done close on 240,000km now and is still going pretty well considering.

The only real gripes I have with the car is on the circuit it could certaily do with a bit more power on the straights, and in the motokahna events it's one hell of a big car to throw around when the cones are so close.

When taking part in ciruit events I can ususally finish in the first 33% of the field depending on the track, so with the right suspension mods the GTS25 can do fairly well.

what mods you got atm?

what mods you got atm?

Suspension & brake mods,

Bilstein shocks

King springs

whiteline sway bars front and rear

strut braces front and rear

adjustable caster arms

Slotted front rotors

Mintex 1166 race pads (front only)

Engine, ecu & exhaust,

K & N air filter (pod)

Custom cold air box

Custom 3" intake pipe

GTS Link ECU

extractors

2 1/2" exhaust system (no cat)

Walbro fuel pump

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Jack the back of the car up, pull that wheel off, pull that sensor out, and put a bore scope into the hole to inspect the outer casing, see if anything looks damaged before you pull the whole thing apart.
    • Ergh... So I pulled the speed sensor out again and the tip was shiny so I think it's rubbing the bearing. The bearing contains the magnets for the speed sensor so I think when the first sensor broke it damaged the magnet ring on the bearing.  This is just a Google image, but there is a hole going to the bearing. So when the tip broke off the old sensor I'm guessing it fouled the bearing... As the magnet is only protected by a plastic cover it would be easy to damage it. So I guess I'm doing a bearing again.   
    • My thinking is that if the O2 sensor is shot then your entire above described experience is pure placebo.
    • Here is the mess that I made. That filler there was successful in filling dents in that area. But in the middle area. I can feel dents. And I've gone ocer it multiple times with filler. And the filler is no longer there because i accidently sanded it away. I've chased my tail on this job but this is something else lol. So I'm gonna attempt filler one more time and if it doesn't work I'll just high fill primer the door and see where the issues are because guidecoat is of no use atm.
    • Ok, so I think I sort of figured out where I went wrong. So I definitely overthinked it, and I over sanded, which is probably a large part of the problem. to fix it, I ended up tapping some spots that were likely to be high, made them low, filled them in, and I tackled small sections at a time, and it feels a lot better.    I think what confused me as well is you have the bare metal, and some spots darker and some are lighter, and when I run my finger across it, it' would feel like it's a low spot, but I think it's just a transition in different texture from metal to body filler.    When your finger's sliding on the body filler, and crosses over to the bare metal, going back and forth, it feels like it's a low spot. So I kept putting filler there and sanding, but I think it was just a transition in texture, nothing to do with the low or high spot. But the panel's feels a lot better, and I'm just going to end up priming it, and then I'll block it after with guide coat.   Ended up wasting just about all of my filler on this damn door lol  
×
×
  • Create New...