Jump to content
SAU Community

Oil Catch Cans

Damo_R34

By Damo_R34,
in South Australia

 Share

Recommended Posts

  • Replies 52
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Posted Images

Sinful Grand Master

Sinful

Posted
Posted
lol Joel, you redeemed yourself with that last line :)

seriously Damo, unless you've done what Joel and others have done in relation to baffles and restrictors, do not try this method.....2 laps around Malalla and they'll be full.

I still believe that the 2 can setup that I described earlier is still the best for no other mods to restrict the oil

+2 for the two can system if you havent done your internal oil mods..

It worked well for my GTR and I took it to the track all the time and was doing quick times.

I still overfilled the oil a litre and half as well.

Your always going to get a bit of oil in the 2nd can if your pushing the car and out in it alot..as long as you top up the oil you will be right ;)

  • 2 weeks later...
DSTROY Grand Master

DSTROY

Posted
Posted (edited)

I decided to fit an oil catch can before i went to Mallala on Sunday, just one of those cheap ones from ISC. This is how much oil was in it after just one day at the track.

post-51334-1238412041_thumb.jpg

Edited by DSTROY
DSTROY Grand Master

DSTROY

Posted
Posted

No baffles, and yes i did overfill. Filled it to the top of the H on the dipstick and i tried not to rev past 7000rpm but i hit the limiter at 8000rpm a few time when the wheels decided to spin coming out of corners in second gear.

Sinful Grand Master

Sinful

Posted
Posted
If the catch can fills up with oil after a few laps, what would it indicate? Severe blow-by? Or just incorrect setup?

They all pump oil out when at high revs from the head as the oil cant drain to the sump quick enough. Mine used to fill up after a full day at the track

Depends on how big the catch can is to get concerned??Thst why I like the two can system one mounted ontop of the head and breathers going to a seond can situated near my headlight

If the catch can was filling up with general driving thats blow by :wub:

djr81 Grand Master

djr81

Posted
Posted
If the catch can fills up with oil after a few laps, what would it indicate? Severe blow-by? Or just incorrect setup?

It can be due to a number of factors, the most common being.

1 Incorrect set up. Mostly this involves people removing the pcv function which allows the sump to be pressurised which in turn causes problems. Make sure the pcv is fitted & working - this can be done even when a catch can is fitted.

2. Oil in the head splashing/generally finding its way into the recirc system. This is common on RB26's particularly. The popular conception is too much oil pumped is into the head - but it is just as much a function of poor shielding for the venting system. It can be fixed by oil restrictors (head off), oil return lines (engine out - mostly), Mines cam baffles (see below!) or oil/air seperators like the Nismo offerings (Stupid money for what you get). The principal advantages of these systems over catch cans is the are either hidden from view or look stock. Which means one less potential point of grief from the police. There are other offerings as shown in this thread but they tend to stick out like dogs b@llocks.

3. Blow by.

  • 5 months later...
DaveB Mentor

DaveB

Posted
Posted
Pete,

Another mod is to relieve/vent the pressure in the sump to a catch can. Also works as a catch can drain if needed which it won't. :D

Where can this connection to the sump be made on an RB25? Could you just T-into the turbo oil return line? Also would it need a PCV valve?

GT-RZ Community Regular

GT-RZ

Posted
Posted
It can be due to a number of factors, the most common being.

1 Incorrect set up. Mostly this involves people removing the pcv function which allows the sump to be pressurised which in turn causes problems. Make sure the pcv is fitted & working - this can be done even when a catch can is fitted.

2. Oil in the head splashing/generally finding its way into the recirc system. This is common on RB26's particularly. The popular conception is too much oil pumped is into the head - but it is just as much a function of poor shielding for the venting system. It can be fixed by oil restrictors (head off), oil return lines (engine out - mostly), Mines cam baffles (see below!) or oil/air seperators like the Nismo offerings (Stupid money for what you get). The principal advantages of these systems over catch cans is the are either hidden from view or look stock. Which means one less potential point of grief from the police. There are other offerings as shown in this thread but they tend to stick out like dogs b@llocks.

3. Blow by.

PCV valve has almost nothing to do with it. The PCV valve only operates when there is negative intake manifold pressure, so unless you have a N/A it is closed apart from off boost... The factory system utilities a passage from the breathers to the intake before the turbo which allows the vacuum from the turbo to continuously pull from the crankcase.

The main thread has better details, no point going over it again in here.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MissMintyR33
      R33 persistent issues. P/steering and lag/misfire

      By MissMintyR33 · Posted

      I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • GTSBoy
      Freddy Plenum vs Genuine options RB25

      By GTSBoy · Posted

      My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
    • Murray_Calavera
      R33 persistent issues. P/steering and lag/misfire

      By Murray_Calavera · Posted

      There is a really fun solution to this problem, buy a Haltech (or ECU of your choice) and put the MAF in the bin.  I'm assuming your going to want more power in future, so you'll need to get the ECU at some stage. I'd put the new MAF money towards the new ECU. 
×
×
  • Create New...