Jump to content
SAU Community

Inner West Crew Whoretown (toowong/st Lucia/kenmore/indooroopilly And Sometimes Sunnybank?)


Recommended Posts

7:30 to close. I won't be there this week, will be next week, hopefully with my baby once more :) Just have to pray that work doesn't dick me around and I am able to pick it up sooner rather than later.

7:30 to close. I won't be there this week, will be next week, hopefully with my baby once more :) Just have to pray that work doesn't dick me around and I am able to pick it up sooner rather than later.

I'm pretty much finished mate. It's all up to the ECU now. That get's done tomorrow as long as there are no more holdups - holyf**kenshit I hate japanese instructions on intercoolers that are supposed to 'bolt on'.

YEAH RIGHT!

I'm sorry if it sounded like I was having a crack at you for the delay, not my intention at all Dan! It's my work I'm worried about mate :( They just decided to fire a manager so it looks like I'll be doing more than a few extra shifts for the next few week. It's just a matter of when I'll have a day off next week to come and pick her up and pay you. I won't know that until tomorrow night but hopefully it'll be early in the week, other wise next Thursday (the 7th) as I have the day off to go to uni but that doesn't start until noon so I could be there in the AM.

I'm super appreciative for all the work you guys have done and can't wait to have my baby back. You've been great with me, could not be happier!

And sucks about the non bolt on "bolt on" IC. Hope it wasn't too much trouble for you!

I'm sorry if it sounded like I was having a crack at you for the delay, not my intention at all Dan! It's my work I'm worried about mate :( They just decided to fire a manager so it looks like I'll be doing more than a few extra shifts for the next few week. It's just a matter of when I'll have a day off next week to come and pick her up and pay you. I won't know that until tomorrow night but hopefully it'll be early in the week, other wise next Thursday (the 7th) as I have the day off to go to uni but that doesn't start until noon so I could be there in the AM.

I'm super appreciative for all the work you guys have done and can't wait to have my baby back. You've been great with me, could not be happier!

And sucks about the non bolt on "bolt on" IC. Hope it wasn't too much trouble for you!

Yeah not a problem mate, always glad to help.

It was only a very minor mod at the end so not a big worry.

I can arrange something like driving the car to your place of work or something similar. I am able to get lifts from just about anywhere and if it means less hassle for you, then sign me up!

ERD Dan, if you see this post:

What options are there for side mount intercooler upgrades for my R32? Do Z32 side mounts fit?

I keep trying to give you a call but have been flat out at work all week :(

Edited by Isola

ERD Dan, if you see this post:

What options are there for side mount intercooler upgrades for my R32? Do Z32 side mounts fit?

I keep trying to give you a call but have been flat out at work all week :(

Dont lie.. you havent been busy at all. ive seen you sitting in cars trying to look busy :nyaanyaa:

ERD Dan, if you see this post:

What options are there for side mount intercooler upgrades for my R32? Do Z32 side mounts fit?

I keep trying to give you a call but have been flat out at work all week :(

ARC side mount

pretty sure r34 ones fit as well.

Seen a few ARC r32 ones floating around in the classifieds section for reasonably cheap

I can arrange something like driving the car to your place of work or something similar. I am able to get lifts from just about anywhere and if it means less hassle for you, then sign me up!

I like this guy.

Work is giving me the shits yet again. I've probably done 7 hours work over the entire week. I'm all for having a good sit down but having a sit down and F5-ing all day gets to me.

I'll trade you jobs. I do 50-60 a week and it's going to get MUCH worse in the next few weeks. Thank god I love what I do so much :)

Yeah it must be so much frickin hard work eyeballin all the pussy every day. Quit ya whingein!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • @Murray_Calavera  If I were an expert I wouldn't be in here looking for assistance.  I am extremely computer literate, have above average understanding on how things should be working and how they should tie together.  If I need to go to a professional tuner so be it, but I'd much rather learn and do things myself even if it means looking for some guidance along the way and blowing up a few engines. @GTSBoy  I was hoping it would be as simple as a large vacuum leak somewhere but I'm unable to find anything, all lines seem to be well capped or going where they need to be, and when removed there is vacuum felt on the tube.  It would be odd for the Haltech built in MAP to be faulty, the GTT tune I imported had it enabled from the start, I incorrectly assumed it was reading a signal from the stock MAP, but that doesn't exist.  After running a vacuum hose to the ECU the signal doesn't change more than 0.2 in either direction.   I'll probably upload a video of my settings tomorrow, as it stands I'm able to daily drive, but getting stuttering when giving it gas from idle, so pulling away from lights is a slow process of revving it up and feathering the clutch until its moving, then it will accelerate fine.  It sounds like I need to get to the bottom of the manifold pressure issue, but the ignition timing section is most intimidating to me and will probably let a pro do that part.  Tomorrow I'll try a different vacuum line to T off of, with any luck I selected one that was already bypassed during the DBW swap. @feartherb26  I do have +T in the works but wanted to wait until Spring to start with that swap since this is my good winter AWD vehicle.  When removing the butterfly, did it leave a bunch of holes in the manifold that you needed to plug?  I thought about removing it but assumed it would be a mess.   I notice no difference when capping the vacuum line to it or letting it do its thing.  This whole thing has convinced me to just get a forward facing manifold when the time comes though.
    • Update: tested my spark plugs that are supposed to be 5ohms with a 10% deviation and one gave me a 0 ohms reading and the rest were 3.9ohm<, so one bad and the others on their way out.
    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
×
×
  • Create New...