Jump to content
SAU Community

Recommended Posts

I'm strongly sonsidering putting an RB25 Det into my Datsun Syyline. What I want to know is what 1/4 mile times do you do in a stock or semi stock ( maybe turbo upgrade) skyline with RB25DET.

Also what is the kerb weight of your car, mine being 1260 kg I'm trying to get an idea of power to weight ratio. Cheers

Link to comment
https://www.sau.com.au/forums/topic/261466-rb25det-how-quick-and-what-weight/
Share on other sites

  • Replies 46
  • Created
  • Last Reply

Top Posters In This Topic

hay mate .. i done 13.9 with my r33 .. full zorst , pod , cooler and a clutch .....

donno if thats good or not but i was happy ...

now im thinknig of getting a hi-flow turbo , safc and i got a bosch fuel pump so should do a lil better ..

The quickest time I've seen with a completely stock R33 is 13.4, and I've seen high 12's with mods but stock turbo. Weight of an R33 is around 1470kgs, so with lighter weight you could expect better results, assuming you can get traction etc.

Where did you see it do a 13.4? R34 GTR's only do a 13.7 pass or so it says...

Almost stock R32 GTR's have done high 12's, so who's driving the R34 :thumbsup:

It's all about 60' times, if you can get your car to hook up properly with a sub 2.0 60', then your in with a shot of a decent ET. The MPH on a stock Skyline is pretty low.

Almost stock R32 GTR's have done high 12's, so who's driving the R34 :thumbsup:

It's all about 60' times, if you can get your car to hook up properly with a sub 2.0 60', then your in with a shot of a decent ET. The MPH on a stock Skyline is pretty low.

So true

So true

Post #10

http://www.skylinesaustralia.com/forums/Be...-B-t260897.html

Also states on Imports 101 that they only do a 13.7, I know these are only rough figures and its from the internet so probably not dead right but eh...

Edited by Dani Boi

Yeh the GTR should be a low 13, I did a 13.765 with catback and a pod filter in the gts-t

Old stock R33 fuel pumps will start to fail,

they wont make fuel pressure,

your car will run lean,

and you will get more power

and u will run a mid 13

and ur engine will 'explodey poos

I dunno what engine is in ur datto at the moment, but the RB25 is probably going to be heavier?

You should be right for a low 13 second pass if you did the swap (stock engine/turbo with exhaust)

Edited by SKY RYAN
I'm strongly sonsidering putting an RB25 Det into my Datsun Syyline. What I want to know is what 1/4 mile times do you do in a stock or semi stock ( maybe turbo upgrade) skyline with RB25DET.

Also what is the kerb weight of your car, mine being 1260 kg I'm trying to get an idea of power to weight ratio. Cheers

I'd be trying to get weights for your current eng/trans and also rb25det, trans, rad, fans, loom ect ect ect.

Just a guess, but the rb setup might weigh a tad or 10 more, giving you around the same curb weight or more than the r33.

Still it'd be a fun-different thing when finished.

The quickest time I've seen with a completely stock R33 is 13.4, and I've seen high 12's with mods but stock turbo. Weight of an R33 is around 1470kgs, so with lighter weight you could expect better results, assuming you can get traction etc.

I think the R33 are 1360kg.

From factory is was quoted 0-400 = 14.4.

No offence but how would a completely stock R33 would run 13.4?

actually,my nephew done the 13.3 when skyryan went down the drags a few weeks ago. he had the white r33 gtst with black mags. would have only had 200 rwhp - 220 rwhp. depends on suspension and 60" times. i had 290hp and could'nt crack a 13. skylines a 1490kg manual and 1520 auto.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...