hypergear Posted November 18, 2011 Author Share Posted November 18, 2011 lol I'm very interested in reasons of their bent turbine shaft. I also had that that problem when we first making roller bearing CHRAs years ago, well thats due to the tolerances left between the sleeves for heat expansion. After we calculated and left the shaft sleeves with correct tolerances the shaft stopped bending and every thing worked as usual. I've followed abit of their thread and looks like some thing technically not 100% at this stage. Link to comment https://www.sau.com.au/forums/topic/261613-hypergear-turbochargers-and-high-flow-services-development-thread/page/152/#findComment-6115567 Share on other sites More sharing options...
Rolls Posted November 18, 2011 Share Posted November 18, 2011 There was an issue with the rear wheels not being built to spec, the wheels would grenade taking the shaft with it. They have moved to a different factory which builds the wheels to spec and apparently has no issue. Link to comment https://www.sau.com.au/forums/topic/261613-hypergear-turbochargers-and-high-flow-services-development-thread/page/152/#findComment-6115571 Share on other sites More sharing options...
Hanaldo Posted November 18, 2011 Share Posted November 18, 2011 Stao, are you sure you don't know the thread size for the oil line fitting in the turbo?? I've been all over the place today trying to find someone who can tell me what thread this is, but so far nobody has found a perfect match. The closest I have got is 1/4 JIC to 3/8 UNO, which looks ALMOST the same but only gets about 3 threads in before it starts to bind. Does anyone have one of Stao's dash 4 oil lines that you could measure the turbo end fitting for me with, I'm so sick of driving all over the place Link to comment https://www.sau.com.au/forums/topic/261613-hypergear-turbochargers-and-high-flow-services-development-thread/page/152/#findComment-6115835 Share on other sites More sharing options...
hypergear Posted November 18, 2011 Author Share Posted November 18, 2011 Turbo oil thread is M10x1.25, water is stock size which is M18x1.5, engine end fitting is M12x1.25 About turbine wheels. they are normally friction welded to the shaft so turbine wheel and shaft are 2 pieces. The wheels are wax casted, if the shape is not uniform then it would not balance. Materials they are generally steel or inconel (tinny percent) mixed steel. Most of performance wheels are inconel mixed or rarely titanium. Wheels just spins, pushing or pushed by air, it won't explode unless they have large air bubbles or some thing like that. They normally explodes when bearing collapse causing wheels striking into its housings at high shaft speed. Most of that energy will be absorbed by the shaft so it bents or twist. Link to comment https://www.sau.com.au/forums/topic/261613-hypergear-turbochargers-and-high-flow-services-development-thread/page/152/#findComment-6116018 Share on other sites More sharing options...
GTScotT Posted November 18, 2011 Share Posted November 18, 2011 It looks like BW have done very little real R&D on the turbos to be honest. Looking like the stuff was dreamed out on paper and sent to their mfg supplier for immediate production. Beta's hit clients cars before they were tested properly, something I feel FR may have been entrusted with by BW... Afterall there is a big relationship between BW and FR in all the original paraphernalia for the units. Stao you should really try get your hands on some lightweight turbing wheels. It would be very interesting. FYI there is an MHI MR turbo that has a very weak front wheel, it is a lightwheight model and a very high failure rate. Link to comment https://www.sau.com.au/forums/topic/261613-hypergear-turbochargers-and-high-flow-services-development-thread/page/152/#findComment-6116178 Share on other sites More sharing options...
hypergear Posted November 18, 2011 Author Share Posted November 18, 2011 Every thing must be fully tested, and evaluated. Half of my new/old designs don't work when comes to testing, however they should work on paper. Even dyno proven they needs to be trailed through various of hash driving, then gets pulled apart making sure nothing abnormal happens to its components before I can sale it and quote on a "rwkws" it makes. Also only knowing this turbo works is not enough, We also trail what a specific turbo behaves if its not installed correctly or did not have correct mods. Those information can guide customers if an issue occurs. For us building and selling turbos is not "only" building and selling turbos. Regarding to turbine wheels I can get them made out of titanium, which weights 30% less. But it comes with a very high manufacturing cost, and I don't know if I can sell them at a high price thou. Link to comment https://www.sau.com.au/forums/topic/261613-hypergear-turbochargers-and-high-flow-services-development-thread/page/152/#findComment-6116235 Share on other sites More sharing options...
zebra Posted November 18, 2011 Share Posted November 18, 2011 You would have a basic idea on what will work without breaking though yeah? Just remembered. I have a pair of broken 2860-5s sitting here. What are the options on having them re-cored. The wheels look ok. Bearings are stuffed though Link to comment https://www.sau.com.au/forums/topic/261613-hypergear-turbochargers-and-high-flow-services-development-thread/page/152/#findComment-6116242 Share on other sites More sharing options...
hypergear Posted November 18, 2011 Author Share Posted November 18, 2011 After all those years of testing and evaluations We've developed a very solid bearing setup. I can high flow them with G1 or G2s CHRA which works well, or we can use the new SS1PU's CHRA and see what they can do in those housings. Link to comment https://www.sau.com.au/forums/topic/261613-hypergear-turbochargers-and-high-flow-services-development-thread/page/152/#findComment-6116253 Share on other sites More sharing options...
zebra Posted November 18, 2011 Share Posted November 18, 2011 Cheers just have too see if it is feasible to mount them on the motor (not going on an rb26) Scott you will like the idea Stao. I would be after the best reponse possible Link to comment https://www.sau.com.au/forums/topic/261613-hypergear-turbochargers-and-high-flow-services-development-thread/page/152/#findComment-6116259 Share on other sites More sharing options...
GTScotT Posted November 18, 2011 Share Posted November 18, 2011 LOL believe it or not I think it is an idea I have toyed with myself. Mine involved a little adapter plate and some die grinding I gave it up once I thought about intake plumbing.. that side of it sucked. Hey Stao any idea what he -5 CHRA matches with? On paper it looks like a GT2860RS spec CHRA from memory.... Link to comment https://www.sau.com.au/forums/topic/261613-hypergear-turbochargers-and-high-flow-services-development-thread/page/152/#findComment-6116281 Share on other sites More sharing options...
zebra Posted November 18, 2011 Share Posted November 18, 2011 I bet you have lol Piping may be.....tricky lol Would've liked -7s or even sr spec gt-ss' etc. might do some research on 517z cores and how similar the wheel sizes are Link to comment https://www.sau.com.au/forums/topic/261613-hypergear-turbochargers-and-high-flow-services-development-thread/page/152/#findComment-6116286 Share on other sites More sharing options...
hypergear Posted November 18, 2011 Author Share Posted November 18, 2011 They are very similar to a RS on a .64 rear. reminds me when I first trailed the SS1PU with a .64 rear housing which made 23psi by 2800RPMs and maxed 266rwkws. By lowering the engine capacity I think it has a pretty good chance of making the power with crazy response. Link to comment https://www.sau.com.au/forums/topic/261613-hypergear-turbochargers-and-high-flow-services-development-thread/page/152/#findComment-6116291 Share on other sites More sharing options...
zebra Posted November 18, 2011 Share Posted November 18, 2011 Was that on an rb25? When did it make peak power? Link to comment https://www.sau.com.au/forums/topic/261613-hypergear-turbochargers-and-high-flow-services-development-thread/page/152/#findComment-6116293 Share on other sites More sharing options...
hypergear Posted November 18, 2011 Author Share Posted November 18, 2011 Thats on a Rb25det. its this one here: http://www.digi-hardware.com/images/dynosheets/atr43/atr43ss1/billet/atr43ss1billet.jpg http://www.digi-hardware.com/images/dynosheets/atr43/atr43ss1/billet/atr43ss1billetboost.jpg Be very interested to see what it would do as twin on a GTR. Link to comment https://www.sau.com.au/forums/topic/261613-hypergear-turbochargers-and-high-flow-services-development-thread/page/152/#findComment-6116298 Share on other sites More sharing options...
zebra Posted November 18, 2011 Share Posted November 18, 2011 Seems very linear but lacks the big mid range that I am after Looks almost identical to a rb25 spec hks gt-rs though Link to comment https://www.sau.com.au/forums/topic/261613-hypergear-turbochargers-and-high-flow-services-development-thread/page/152/#findComment-6116303 Share on other sites More sharing options...
hypergear Posted November 18, 2011 Author Share Posted November 18, 2011 But aren't you be running them as a twin on a GTR? Link to comment https://www.sau.com.au/forums/topic/261613-hypergear-turbochargers-and-high-flow-services-development-thread/page/152/#findComment-6116323 Share on other sites More sharing options...
zebra Posted November 18, 2011 Share Posted November 18, 2011 Possibly as a twin but not on a Nissan motor Looking at that graph though. Might be worth running just one but with a larger t3 flanged turbine housing I'd be after bulk torque from 3000-6500 Link to comment https://www.sau.com.au/forums/topic/261613-hypergear-turbochargers-and-high-flow-services-development-thread/page/152/#findComment-6116328 Share on other sites More sharing options...
hypergear Posted November 18, 2011 Author Share Posted November 18, 2011 Yea if engine capacity decreases then that would be same as the above turbo with a larger turbine housing. And with two of them they will make almost twice amount of power as a single. Link to comment https://www.sau.com.au/forums/topic/261613-hypergear-turbochargers-and-high-flow-services-development-thread/page/152/#findComment-6116330 Share on other sites More sharing options...
zebra Posted November 18, 2011 Share Posted November 18, 2011 Will still be a 2.5L motor I'll have a hunt for a housing to suit that is t3 and internal gate with the normal Garrett 5 bolt outlet as I may have something in the garage that will work Link to comment https://www.sau.com.au/forums/topic/261613-hypergear-turbochargers-and-high-flow-services-development-thread/page/152/#findComment-6116332 Share on other sites More sharing options...
hypergear Posted November 18, 2011 Author Share Posted November 18, 2011 If you run above as a twin on a 2.5L then that would be 1.25L per turbo. Which I think a .64 is too big, need to run a .49 size. I can supply you a SS1PU in a T3 with 5 bolt Garrett pattern to run as single on a 2.5L, is that same pattern as T28 or the GTR?. Dynosheet of that on the Rb25det is http://www.digi-hardware.com/images/dynosheets/atr43/atr43ss1pu/280811/power.jpg http://www.digi-hardware.com/images/dynosheets/atr43/atr43ss1pu/280811/boost.jpg Link to comment https://www.sau.com.au/forums/topic/261613-hypergear-turbochargers-and-high-flow-services-development-thread/page/152/#findComment-6116345 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now