Jump to content
SAU Community

Hennessey 700hp Package @ $26k Aud For The Bits


Recommended Posts

http://www.themotorreport.com.au/25518/hen...age/#more-25518

* 0-60 mph: 2.8 sec. (stock = 3.4)

* 0-100 mph: 6.7 sec. (stock = 8.3)

* 0-150 mph: 14.5 sec. (stock = 19.5 sec.)

* 0-186 mph: 24.7 sec. (stock = 53.3 sec.)

* 1/4 mile: 10.8 sec. @ 133 mph (stock = 11.8 sec. @ 118 mph)

Check out the Utube video of the car on Hennessey's website. The acceleration of the car is bloody brutal. Must put a lot of stress on the tranny, surely you'd have to upgrade the internals for long term reliability.

http://www.hennesseyperformance.com/ItemDe...ActionReq=Where

Edited by GT-R OZ

Trans upgrade is included. You can get a gearset from PPG.

Brakes - only required if you will do any serious track work. Any production car has crap brakes for serious track work and needs at minimum upgraded pads and disks.

1/4 mile time is still a bit slow considering boosted stock turbos and a good launch get the car to run low 11s, high 10s.

From link:

Power:

715 hp @ 6,500 rpm

662 lb-ft Torque @ 4,100 rpm

Performance:

0-60 mph: 2.8 sec. (stock = 3.4)

0-100 mph: 6.7 sec. (stock = 8.3)

0-150 mph: 14.5 sec. (stock = 19.5 sec.)

0-186 mph: 24.7 sec. (stock = 53.3 sec.) 1/4 mile: 10.8 sec. @ 133 mph (stock = 11.8 sec. @ 118 mph)

Includes:

SUMO ™ Stainless Steel 88 mm Catback Exhaust System

SUMO ™ Stainless Steel Midpipe Exhaust

SUMO ™ Engine Management Computer Programmer (17 psi boost)

SUMO ™ Intercooler Piping Upgrade

SUMO ™ Inlet Piping Upgrade with Stainless Steel Blow-off Valves

SUMO ™ Sport Turbo Upgrade – Modified Factory Turbos with 47 mm Compressor Wheels (stock compressor wheels = 42 mm)

SUMO ™ Modified Factory Wastegate Actuators

SUMO ™ 100 mm High-Flow Cold Air Induction

Modified Factory Mass Air Sensors

High-Flow Fuel Injectors with Custom Calibration

Transission Cooler Upgrade

Transission Clutch Pack Upgrade

Professional Installation

All Necessary Gaskets & Fluids

Chassis Dyno Tuning & Engine Management Calibration

Powered by Hennessey Custom Floor Mats

Limited Edition GTR700 Plaque in Interior & Engine Compartment

Factory Engine Cover in Red with black GTR600 Badges

Hennessey & GTR700 Exterior Badges

The GTR700 kit is also available via mail order and it can also be exported internationally.

Optional Upgrades:

SUMO ™ Electronic Exhaust Cutout (75 mm)

KW Variant 3 Adjustable Coilover Suspension Upgrade

HRE C91 Light Weight Alloy Wheel Upgrade (set of 4)

SUMO ™ Brand Hennessey Performance Engineering (HPE) is proud to introduce its own line of high-performance parts & accessories for the R35 Nissan GTR. As the name implies, our SUMO ™ performance brand is big and powerful. Each individual component included in the GTR700 upgrade is available individually on a mail-order basis. GTR owners can order SUMO ™ performance parts from HPE by calling or by visiting the company’s new web store at HennesseyPerformanceStore.com

  • 8 months later...
  • 1 month later...
  • 1 month later...

Having read several write ups on Hennessey on other forums, I'd suggest you steer clear of them.

If you send money, you may not get your parts, if you send your car to them, you may not get it back and if you buy a car from them, expect to find some nasty surprises!

Just buy the equivalent HKS parts, apparently Hennessey just copied them anyway.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
×
×
  • Create New...