Jump to content
SAU Community

Recommended Posts

Just reading the May issue of MOTOR mag......

"In fact,late 2007.I toured the GTR production facility and I asked

a Nissan engineer point-blank about the longevity of the engine.

There was,he said,no reason to suspect that the GTR bores would last anything less than 300,000 km,

and possibly even more" (Page103 Motor Mag)

This was in response to as he says....

""Forum after forum of worried punters,grieving because they might

have to buy a new engine instead of simply boring......................."

"This ignores a couple of salient facts:"

" a) Most of the nongs who populate such forums rather than the real

world are about as likely to buy a brand new GTR as I am of voting

for Family first.."

" b) since the coating is so tough in the first place,it'll last longer than any

conventional liners anyway."

Words by David Morley "Motor" mag.....

Link to comment
https://www.sau.com.au/forums/topic/265754-plasma-coated-bores/
Share on other sites

Well I know where he is coming from, as I read quite a few times on forums etc that because of the plasma lining the GTR would need to have a service at 100,000km that would involve the engine coming out to recoat the cylinders.

Based on the facts in the Motor article, this appears grossly mis-informed.

Edited by r32line

whenever this pops up i'm always saying it's just internet rumour b.s., like so many other things floating around this car.

the logitics of a complete re-lining of all cylinders is so far beyond what practically all dealerships around the world could ever dream of being able to handle, should tell people enough that there is no way at 100K km you'd be able to drive your car in for it's scheduled "major" service.

that and the fact that despite all these cars being officially delivered, there has not one dealership anywhere in any market saying you'll need to come back in at 100K km's mate, we'll just need the car for a few months

all complete fantasy.

So does this need to happen when the car reaches 40,000 Km? If so, do you know how much it is?

No you only have to get it done when you fill up with Petrol, I have had mine done 3 times now, it is booked it for when I fill up this afternoon. ;)

The 40k rumour is a complete respray of the car......it goes so fast the paint peels off so to keep it in good condition you need to have it resprayed.

Hope the information helps.

Just reading the May issue of MOTOR mag......

"In fact,late 2007.I toured the GTR production facility and I asked

a Nissan engineer point-blank about the longevity of the engine.

There was,he said,no reason to suspect that the GTR bores would last anything less than 300,000 km,

and possibly even more" (Page103 Motor Mag)

This was in response to as he says....

""Forum after forum of worried punters,grieving because they might

have to buy a new engine instead of simply boring......................."

"This ignores a couple of salient facts:"

" a) Most of the nongs who populate such forums rather than the real

world are about as likely to buy a brand new GTR as I am of voting

for Family first.."

" b) since the coating is so tough in the first place,it'll last longer than any

conventional liners anyway."

Words by David Morley "Motor" mag.....

well I've only been saying this since DECEMBER 2007!! and posted it on the forum at that time too. but no one listens to the poor old beer baron. I asked nissan japan myself way back then and the engineer that I asked nearly fell off his chair laughing at me when I asked if the engine needed a rebuild every 100K kms. he then explained than even the RB26 will live for well over 200,000kms without rebuild (in standard form) and that the VR38 is more advanced and that the plasma coating extends engine life, not reduces it.

well I've only been saying this since DECEMBER 2007!! and posted it on the forum at that time too. but no one listens to the poor old beer baron. I asked nissan japan myself way back then and the engineer that I asked nearly fell off his chair laughing at me when I asked if the engine needed a rebuild every 100K kms. he then explained than even the RB26 will live for well over 200,000kms without rebuild (in standard form) and that the VR38 is more advanced and that the plasma coating extends engine life, not reduces it.

My apologies..... :P .....Just conformation.

My apologies..... :P .....Just conformation.

lol, no worries mate. I wasn't pissed. just I have a sore voice from saying the same thing for 1 and a half years now! but yet still no one believes me. :D maybe they will believe morely....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...