Jump to content
SAU Community

Recommended Posts

Hi all,

My V35 has a Nismo 280km/h speedo, with the gps, the speedo is out by between 6 - 14 km/h. I recently removed the speedo and took it to an instument specialist who was unable to do anything with it to calibrate.

Anyone have any ideas or experienced this problem?

Thanks

Link to comment
https://www.sau.com.au/forums/topic/266515-nismo-speedo/
Share on other sites

does ur car has after market rims and t7res? if so, what size?

any after market lsd?

I used to have a 300km/h speedo on the old gtst and it was out by about 10km/h but that's because I have after market rims, and the car has 4:3 diff instead of std 4:11 diff

Link to comment
https://www.sau.com.au/forums/topic/266515-nismo-speedo/#findComment-4548310
Share on other sites

This is the only speedo corrector I have found that works with Nissan's unique AC speed signal.

http://www.jaycar.com.au/productView.asp?I...mp;form=KEYWORD

http://www.gtr.co.uk/forum/111435-speedo-c...ed-r33-gtr.html

Link to comment
https://www.sau.com.au/forums/topic/266515-nismo-speedo/#findComment-4548314
Share on other sites

This is the only speedo corrector I have found that works with Nissan's unique AC speed signal.

http://www.jaycar.com.au/productView.asp?I...mp;form=KEYWORD

http://www.gtr.co.uk/forum/111435-speedo-c...ed-r33-gtr.html

I am always worried and conscious when changing to new tyre sizes, but does it mean now with this item, i can buy any tyre size i like, then correct the difference(required by road law)? Or is the item also illegal to be used, just like wrong tyre size with more than 5% difference in reading? (which i hope not)

Link to comment
https://www.sau.com.au/forums/topic/266515-nismo-speedo/#findComment-4548386
Share on other sites

first things first.

What tyre profile are you running currently. Most speedos read inaccurate because you are running the wrong tyre profile hence upsetting the factory overall diameter. Nothing much to do with aftermarket wheels.

QLD laws state that your OD cannot vary by more than +- 15mm. Over or above this you will get significant inaccuracies with your speedo, either reading too fast or too slow.

Here is a useful calculator you can use to determine if you are within factory specs.

http://www.1010tires.com/tiresizecalculator.asp

Link to comment
https://www.sau.com.au/forums/topic/266515-nismo-speedo/#findComment-4549677
Share on other sites

Within 6-10km is normal, I think the ADRs say it has to be within 10% Yes as has been raised many times this is stupid because your speedo could read 100 and you are actually doing 110, it would meet ADR but you would still get a fine. Thing is basically all speedos overstate your speed. I think TT/ACA did a test once and Jeep Cherokees speedos said 120 when they were doing 110.

That said, I guess if it was out by as much as 10km/h it would be annoying.

Edited by Oaksey
Link to comment
https://www.sau.com.au/forums/topic/266515-nismo-speedo/#findComment-4549829
Share on other sites

Yeah you gotta love the way a car can be up to 10% out and ADR will pass it, but the cops will happily fine you for less than 10% over the speed limit. hmmmm.

Like all the defect rules that exist yet when a prominent organisation suggested that a police Honda motorcycle, due to it's non-symmetrical excess mass (sirens, lights, etc) was unsafe above 130 km/h, it was ok.

Or that "there's no such thing as safe speeding, every k over is a killer", yet police will reach huge speeds to get to a bank that's been robbed of it's fully insured money, but that's acceptable.

Almost as if they're screwing us.....

Link to comment
https://www.sau.com.au/forums/topic/266515-nismo-speedo/#findComment-4549855
Share on other sites

since most factory speedo are around 4-6% overstated from the factory, when changing rims n tyres you could probably do a bit research and maths and try to get a tyre size that's about 5% larger than factory diameter, that should bring the accuracy up to about 1% between speedo and actual travel speed

Link to comment
https://www.sau.com.au/forums/topic/266515-nismo-speedo/#findComment-4549895
Share on other sites

thanks everyone for the input, my car had the factory 18's when I got it and the speedo was out pretty much as it is now. I presume the diff etc is standard as the car appears so. I changed the wheels to 245/40/18 = lower profile from the 45. This made the speed out by probably 1 more km/h.

ill have a look at some of the ideas in the links given and see how I go but yeah, up to 14 km/h is frustrating.

thanks

Link to comment
https://www.sau.com.au/forums/topic/266515-nismo-speedo/#findComment-4550512
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Impossible to remove the housing while turbo is installed on the manifold on the engine. So I have to do it anyways. I plugged it so there will not be any debris in there. Will vacuum aswell 
    • would a r34 gtr hood line up with gt/gtt stock fenders? after latch, front bumper and hinges are swapped for gtr ones? or would the fenders be too low or high in relation to the hood surface? ( I believe seeing somewhere that gtr front fenders use some type of riser for the sides, but do not know how that relates to stock gt/gtt fenders.)    
    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
×
×
  • Create New...